Abstract:The automated tape placement and the automated fiber placement (AFP) machines provide a safer working environment and reduce the labor intensity of workers than the traditional manual fiber placement does. Thus, the production accuracy, repeatability and efficiency of composite manufacturing are significantly improved. However, the current AFP systems can only produce the composite components with large open surface or simple revolution parts, which cannot meet the growing interest in small complex or closed structures from industry. In this research, by employing a 1-degree of freedom (DoF) rotational stage, a 6-RSS parallel robot, and a 6-DoF serial robot, the dexterity of the AFP system can be significantly improved for manufacturing complex composite parts. The rotational stage mounted on the parallel robot is utilized to hold the mandrel and the serial robot carries the placement head to mimic two human hands that have enough dexterity to lay the fiber to the mandrel with complex contour. Although the CCM system increases the flexibility of composite manufacturing, it is quite time-consuming or even impossible to generate the feasible off-line path, which ensures uniform lay-up of subsequent fibers considering the constraints like singularities, collisions between the fiber placement head and mandrel, smooth fiber direction change and keeping the fiber placement head along the norm of the part's surface, etc. Moreover, due to the existing positioning error of the robots, the on-line path correction is needed. Therefore, the on-line pose correction algorithm is proposed to correct the paths of both parallel and serial robots, and to keep the relative path between the two robots unchanged through the visual feedback when the constraint or singularity problems in the off-line path planning occur. The experimental results demonstrate the designed CCM system can fulfill the movement needed for manufacturing a composite structure with Y-shape.

Post Processing Technology for Fiber Placement Machine of Manipulator Terminal Motion Trajectory

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Modeling and Compensation of Volumetric Errors for a Six-Axis Automated Fiber Placement Machine Based on Screw Theory

Comparison and Post-processing Algorithm for 7 DOF Fiber Placement Machine

A post-processing algorithm for gantry-type automated fiber placement machine

Measurement, Identification, and Compensation of Pose Errors for Six-Axis Gantry Automated Fiber Placement Machine

Kinematic Modeling and Parameter Identification for a Heavy Gantry-Type Automated Fiber Placement Machine Considering Gravity Deformation

Fiber Tension Prediction and Control Methods in Automated Fiber Placement

A Modeling and Calibration Method of Heavy-Duty Automated Fiber Placement Robot Considering Compliance and Joint-Dependent Errors

Smooth Joint Motion Planning for Redundant Fiber Placement Manipulator Based on Improved RRT*

Kinematic Modeling and Error Parameter Identification of Automated Fiber Placement Machine Based on Measured Data

Determination and application of posture adjustable domain under constraints of placement quality

Online Path Correction under End Point Nonholonomic Constraints – Implementation with Visual Sensing in Robotic Fiber Placement

Modeling of Tension Control System with Passive Dancer Roll for Automated Fiber Placement

Design of Robotic Fiber Placement Machine and Process Optimization for Thermoplastic Composites

Design of simulation system for fiber placement based on CATIA CAA

Variable-Angles Trajectory Planning Algorithm of Automated Fiber Placement for Conical Shell

Research on fiber placement machine and path planning methodology

Variable-Angle Trajectory Planning Algorithm for Automated Fiber Placement of Two Non-developable Surfaces

Operation of the Collaborative Composite Manufacturing (CCM) System

Configuration Design and Posture Analysis of 3- PTT CNC Serial-parallel Machine