Effect of high-density-polyethylene (HDPE) and waste tire rubber (WTR) on laboratory performance of styrene butadiene styrene (SBS) modified asphalt
Kezhen Yan Kaixin Shi Min Wang Junxian Huang Yiran Li Zongyan Ouyang a Key Laboratory for Green & Advanced Civil Engineering Materials and Application Technology of Hunan Province,College of Civil Engineering,Hunan University,Changsha,People's Republic of Chinab National Engineering Research Center of Highway Maintenance Technology,Changsha University of Science & Technology,Changsha,Hunan,People's Republic of Chinac College of Civil Engineering,Central South University,Changsha,People's Republic of Chinad Southwest Jiaotong University and Leeds Joint School,Chengdu,People's Republic of China
DOI: https://doi.org/10.1080/14680629.2024.2400528
2024-09-14
Road Materials and Pavement Design
Abstract:To reduce the cost of SBS modified asphalt, we incorporated waste high-density polyethylene (HDPE) and waste tire rubber (WTR) as partial substitutes for SBS modifier. The performance parameters for HDPE, WTR, and SBS synergistic modified asphalt were designed using the response surface method. Specifically, modified asphalt groups with excellent conventional properties were identified through penetration, softening point, and ductility tests. The high/low-temperature rheological properties and anti-aging properties of the selected modified asphalt were investigated. The modification mechanism of the composite modified asphalt was studied using fluorescence microscopy (FM). Subsequently, a cost analysis of the modified asphalt was conducted. Based on the aforementioned studies, we recommend a composition of 1.5% SBS, 3% HDPE, and 10% WTR, which demonstrated superior performance compared to 4% SBS modified asphalt. Furthermore, the cost of the modified asphalt was found to be 13.3% lower than that of SBS modified asphalt.
construction & building technology,materials science, multidisciplinary,engineering, civil