Abstract:The vaneless diffuser (VLD) is usually adopted in the traditional design of the multi-stage centrifugal compressor because of the stage's match problem. The drawback of the stage with vaneless diffusers is low efficiency. In order to increase the efficiency and at the same time, induce no significant decline in the operating range of the stage, three different types of vaned diffusers are designed and numerically investigated: the traditional vaned diffuser (TVD), the low-solidity cascade diffuser (LSD) and the partial-height vane diffuser (PVD). These three types of vaned diffusers have different influences on the performance of the centrifugal compressor. In the present investigation, the first part investigates the performance of a centrifugal compressor stage with three different vaned diffusers. The second part studies the influences of the height and the position of partial height vanes on the stage performance, and discusses the matching problem between the PVD and the downstream return channel. The stage investigated in this paper includes the impeller, the diffuser, the bend and the return channel. In the process of numerical investigation, the flow is assumed to be steady, and this process includes calculation and simulation. The calculation of 3-D turbulent flow in the stage uses the commercial CFD code NUMECA together with the Spalart-Allmaras turbulence model. The simulation of the computational region includes the impeller passages, the diffuser passages and return channel passages. The structure and surrounding region are assumed to have a perfect cyclic symmetry, so the single channel model and periodic boundary condition are applied at the middle of the passage, that is to reduce the calculation region to only one region. The investigation showed that the low-solidity cascade diffuser would be a better choice as a middle course for the first stage of the multistage centrifugal compressor. Besides, the influences of the height and the position of partial height vanes on the stage performance are intensively investigated and concluded at the design point, the isentropic efficiency and the static pressure ratio of the stage are improved with the increasing of the partial vane's height, and that installing the half-height vanes on the shroud side the stage would obtain a more uniform diffuser outflow and a better aerodynamic performance.

Aerodynamic Optimization Design Of Vaned Diffusers For The 100kw Micro Gas Turbine'S Centrifugal Compressor

Multi-objective Optimization of Transpiration Cooling for High Pressure Turbine Vane

Aerodynamic Design and Performance Evaluation of Pipe Diffuser for Centrifugal Compressor of Micro Gas Turbine

Intelligence Design Method for Three-Dimensional Vaned Diffusers in a Centrifugal Compressor

Performance Improvement of a High Loading Centrifugal Compressor with Vaned Diffuser by Hub Contour Optimization

Aerodynamic Optimization Design of Vaned Diffuser for Centrifugal Compressor under Stage Environment

Optimization Of High Speed Centrifugal Compressor For A Micro Gas Turbine Based On Cfd And Fem Analysis

Investigation of a Highly Loaded Transonic Centrifugal Compressor Using an Advanced Design Method

Synthetically aerodynamic design and optimization on the stationary units of centrifugal compressor

Redesign of a High Speed Micro-centrifugal Compressor

CFD Investigation on the Application of Optimum Non-Axisymmetric Endwall Profiling for a Vaned Diffuse

Design and Numerical Investigation of Wedge Vane Diffuser with Splitter Blade

Study On Aerodynamic Redesign Of A High Pressure Ratio Centrifugal Compressor

Efficiency Improvement and Pressure Pulsation Reduction of Volute Centrifugal Pump Through Diffuser Design Optimization

Coupled Aerothermodynamics Optimization for the Cooling System of a Turbine Vane

Aerodynamic Design And Optimization Of Pipe Diffuser For A High Loading Centrifugal Compressor

A Numerical Investigation of the Effect of Vaned Diffuser Water Cooling on the Internal Flow Field of a Centrifugal Compressor

Multi-Objective Aerodynamic Optimization of Gas Turbine Exhaust Diffuser: Experimental and Numerical Validations

Aerodynamic Optimization Design for All Condition of Centrifugal Compressor

Performance Improvement Of A Centrifugal Compressor Stage By Using Different Vaned Diffusers

Investigation Of Vaned Diffuser Splitters On The Performance And Flow Control Of High Pressure Ratio Centrifugal Compressors