Abstract:Piezoelectric composite materials, combining the advantages of both piezoelectric materials and polymers, have been extensively used in ultrasonic transducers. However, the pitch size of radial array ultrasonic transducers normally exceeds one wavelength, which limits their performance. In order to minimize grating lobes of current radial transducers and then increase their imaging resolution, a 2.5 MHz 1-3 composite radial array transducer with 64 elements and 600 μm pitch was designed and fabricated by combining flexible circuit board and using a bending-and-superposition method. All the array elements were connected and actuated via the customized circuit board which is thin and soft. The kerf size is set to be 1/3 wavelength. PZT-5H/epoxy 1-3 composite was used as an active material because it exhibits an ultrahigh electromechanical coupling coefficient (kt = 0.74), a very low mechanical quality factor (Qm = 11), and relatively low acoustic impedance (Zc = 13.43 MRayls). The developed radial array transducer exhibited a center frequency of 2.72 MHz, an average −6 dB bandwidth of 36%, an insertion loss of 31.86 dB, and a crosstalk of −26.56 dB between the adjacent elements near the center frequency. These results indicate that the bending-and-superposition method is an effective way to fabricate radial array transducers by binding flexible circuit boards. Furthermore, the utilization of tailored flexible circuitry boards presents an effective approach for realizing reductions in crosstalk level (CTL).

The Radial Composite Piezoelectric Ceramic Transducer

Mathematical Modelling of One-Dimensional Piezoelectric Transducers Based on Monoclinic Crystals

Modelling of Nonlinear Dynamics for Reciprocal Multi-Layer Piezoceramic Transducer Systems

Parametric Analysis and Optimization of Radially Layered Cylindrical Piezoceramic/Epoxy Composite Transducers

Lymphocystis in fish from East African lakes.

Acoustic Radiation of A Cylindrical Piezoelectric Power Transformer

Radial vibration of piezoelectric/magnetostrictive composite hollow sphere

Noise Enhanced $M$-ary Composite Hypothesis-Testing in the Presence of Partial Prior Information

RADIAL VIBRATION OF ELASTO-PIEZOELECTRIC COMPOSITE CYLINDER WITH AN ISOTROPIC ELASTIC CORE

Coupled vibration of a radially polarized piezoelectric cylinder with a co-axial elastic cylinder of varying height

Analysis on coupled vibration of piezoelectric ceramic stack with two piezoelectric ceramic elements.

Large thoracic duct cyst - a case report and review of the literature.

Analysis of a Cascaded Piezoelectric Ultrasonic Transducer with Three Sets of Piezoelectric Ceramic Stacks

Design of Radial Composite Longitudinal Vibration Piezoelectric Transducer Excited by Four Piezoelectric Stacks

Design of Piezoelectric Ultrasonic Transducer Based on Doped PDMS

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

Analysis of Longitudinal and Torsional Resonance Vibrations of a Piezoelectrically Excited Bar by Introducing Piezoelectric Loss Coefficients

Research on the Characteristics of High-Performance Textured Ceramic Materials and Their Application in Composite Rod Transducers

Fabrication of Radial Array Transducers Using 1-3 Composite via a Bending and Superposition Technique

Pneumocystis carinii pneumonia. Occurrence in a healthy American infant.

Design and Analysis of A Piezoelectric Ultrasonic Transducer for Distance Measurement