Key Techniques on Cultural Relic 3D Reconstruction

Zhao-wen QIU,Tian-wen ZHANG

DOI: https://doi.org/10.3321/j.issn:0372-2112.2008.12.028

2008-01-01

Abstract:Cultural relic 3d reconstruction is key techniques of digital museum.The key techniques of 3d modeling and texture mapping are discussed in detail and an feasible project is given in this paper.Some key issues of cultural relic 3D reconstruction for future research are discussed.

What problem does this paper attempt to address?

Interactive High Resolution Texture Mapping for the 3D Models of Cultural Heritages

Changyu Diao,Dongming Lu

DOI: https://doi.org/10.1007/978-3-540-78566-8_17

2008-01-01

Abstract:Virtual reconstruction of cultural heritage is not only the basis but also one of important contents of its digitized research. The techniques of interactive texture reconstruction researched in this article are of great significance to heighten the effect of virtual reconstruction of cultural heritage. Firstly, interactive and precise texture mapping is aiming at establishing the relationship between texture images and 3D models by appointed corresponding points interactively. The process is based on the traditional camera calibration. For a camera with known intrinsic parameters, three pair of corresponding points will be used to calculate the initial value of extrinsic parameters, and more corresponding points will be used to refine the result. For a camera with unknown intrinsic parameters, an implicit projection matrix will be calculated directly. Secondly, a fast occlusion culling method will be used to remove hidden triangle from texture mapping. At last, a natural neighbor interpolation method will be used to minimize the texture mapping error caused by lens distortion of the camera and the error of 3D scanner.
Modeling and immersive display of cultural heritage

Lei Zhao,Duan-qing Xu,Yi Li,Yi-min Yu

DOI: https://doi.org/10.1007/11941354_107

2006-01-01

Abstract:In order to display virtual cultural heritage environment in CAVE based on multiple cheap PC, we implement a collaborative display platform called Multipro. The application developer doesn’t need to know anything about stereo display principles and the platform architecture. We reconstruct the model of No285 cavern of Dunhuang and Hemudu virtual environments by a variety of software and techniques. The paper also addresses the issues of the modeling and display of immersive virtual heritage environments (VHEs).We in detail describe the methods we use to model the heritages and how we fill the holes in the raw heritage models and remove noise of the models. This work is being developed in the context of the National Grand Fundamental Research 973 Program of china.
Relic Protection and Digitization Technology

DM Lu,CY Diao

DOI: https://doi.org/10.1109/icsmc.2004.1401414

2004-01-01

Abstract:Digitization technologies play more and more important role in relic protection now. This article summarizes the current status of digitization technology application in relic protection. Combined with work achieved in the digitization protection, restoration and development of Dunhuang Cave in recent years, the application of digitization technology in the relic protection fields such as information acquisition, display, mural copy and intelligent pattern creation of Dunhuang style is introduced. Artificial intelligence and multi-media technology was combined with arts; many techniques were developed to resolve the problems and achieved excellent results. At the end of the article, a conclusion about achievement and experience of digitization relic protection is drawn and some possible future directions are also suggested.
A Novel Approach to 3D Reconstruction Technology of Small Cultural Relics Based on Spatial Coded Texture Image Projection

Yuting Chen,Qingwu Hu,Zhumao Lu,Hao Gong

DOI: https://doi.org/10.1109/ieeeconf54055.2021.9687639

2021-11-03

Abstract:It has become a global trend to combine information technology with the protection, research, inheritance of cultural relics utilizing computers, networks, software, which can provide supporting technologies and tools. Towards the key problem of 3D digitization of cultural relics in digital museum construction, a 3D reconstruction technology of small cultural relics based on spatial coded texture image projection is proposed. Firstly, a colorful texture spatial coded picture is designed based on the pseudo-random M-array whose window is unique. Secondly, a decoding algorithm based on color transfer technology is proposed to realize the decoding and accurate positioning of spatial coding. Finally, use the multi-view images after pixel coordinates positioning to directly obtain the corresponding points, and the 3D reconstruction of small cultural relics is realized. The experimental results show that the 3D reconstruction accuracy of the proposed method reaches 0.1488mm, which can better solve the problems encountered in the 3D reconstruction of small cultural relics.
A METHOD OF 3D MEASUREMENT AND RECONSTRUCTION FOR CULTURAL RELICS IN MUSEUMS

S. Zheng,Y. Zhou,R. Huang,L. Zhou,X. Xu,C. Wang

DOI: https://doi.org/10.5194/isprsarchives-xxxix-b5-145-2012

2012-07-27

Abstract:Abstract. Three-dimensional measurement and reconstruction during conservation and restoration of cultural relics have become an essential part of a modem museum regular work. Although many kinds of methods including laser scanning, computer vision and close-range photogrammetry have been put forward, but problems still exist, such as contradiction between cost and good result, time and fine effect. Aimed at these problems, this paper proposed a structure-light based method for 3D measurement and reconstruction of cultural relics in museums. Firstly, based on structure-light principle, digitalization hardware has been built and with its help, dense point cloud of cultural relics' surface can be easily acquired. To produce accurate 3D geometry model from point cloud data, multi processing algorithms have been developed and corresponding software has been implemented whose functions include blunder detection and removal, point cloud alignment and merge, 3D mesh construction and simplification. Finally, high-resolution images are captured and the alignment of these images and 3D geometry model is conducted and realistic, accurate 3D model is constructed. Based on such method, a complete system including hardware and software are built. Multi-kinds of cultural relics have been used to test this method and results prove its own feature such as high efficiency, high accuracy, easy operation and so on.
Dunhuang Cave Virtual Rebuilding and Mural Restoration Simulating

鲁东明,潘云鹤,陈任

DOI: https://doi.org/10.3321/j.issn:1001-1595.2002.01.003

2002-01-01

Abstract:Many rare culture relics and sites have been on the verge of great danger because of natural disaster, economic and tour development, etc. How to conserve, research and exploit the heritage resource is becoming more and more instant and important. In this paper, we discuss how to conserve, rebuild and restore culture relics and sites digitally, through the integration of computer science and conventional heritage-protection technology. Now, we have developed Dunhuang Cave Virtual Navigation System, Faded Mural Restoration and Evolvement Simulation System through taking advantage of the Virtual Reality, Image Processing and Artificial Intelligence technology. These works improve the efficiency of heritage conservation and research extremely.
A Study of Digital Information Recording Technology for Multiform-dimension Objects

陈任,鲁东明,潘云鹤

DOI: https://doi.org/10.3321/j.issn:1001-1595.2003.04.011

2003-01-01

Abstract:Digital information recording is the basis of virtual representation, transformation and analysis for multiform-dimension objects. In the process of building virtual worlds, recording the spatial and colorific attributes of the multiform-dimension objects is always a hard, but very important job. Taking the heritages of Dunhuang Art Cave as examples, the integrated technology of digital information recording for multiform-dimension objects is discussed. In addition, according to the specialties of the representative heritages of Dunhuang Art Cave, the methods and criterions for recording murals and painted sculptures are proposed, that can satisfy the requirements of the high-precision documentation and representation of digital heritages.
Web3d Technology And Its Application In The Cultural Relic Protection

yuhui yang,jianping zhang

DOI: https://doi.org/10.1109/ICCSIT.2009.5234783

2009-01-01

Abstract:At present, there are some problems in cultural relics protection. For example,it cost a lot of money to protect and exhibit physical cultural relics, while it is impossible to show some extinct or vanished cultural relics, so it is difficult for everyone to understand the relevant history and culture. Fortunately, with the development of virtual reality technology, the virtual cultural relics based on Web3d technology become more and more vivid. Using web3d technology in the field of cultural relics protection has become an important research direction. This article presents Web3d technology and its application in the cultural relic restoration. Firstly, currently popular Web3d technology; Secondly, the significance of cultural relic protection based on Web3d; Finally, three cases of cultural relic protection based on Web3d.The aim is to provide reference for research of cultural relics protection based on Web3d.
3d Digitization And Its Applications In Cultural Heritage

Renju Li,Tao Luo,Hongbin Zha

DOI: https://doi.org/10.1007/978-3-642-16873-4_29

2010-01-01

Abstract:3D digitizing technology has a variety of applications including reverse engineering, quality control, virtual reality and digital heritage. Recently, great development in 3D digitizing technology facilitates archaeology and digital preservation of cultural heritage. In this paper, we introduce a 3D digitizing pipeline for cultural heritage. By using 3D technology, both geometry and texture can be recovered with high precision. Four main applications including digital archiving, 3D line drawing, virtual restoration and virtual display are introduced. The technology has been successfully implemented in many digital heritage projects such as Longmen, Xiangtangshan, Maijishan, Nanyuewang museum and so on. These projects demonstrate that 3D digitization greatly facilitates archeology and plays an important role in cultural heritage protection.
Cultural Relics Restoration Technology in Virtual Reality: Application of 3D Modeling and Rendering Algorithms in Cultural Relics Digitization

Guanyun Zhao,Ratanachote Thienmongkol,Ruethai Nimnoi

DOI: https://doi.org/10.61707/j205b632

2024-06-22

International Journal of Religion

Abstract:Preserving humanity's cultural legacy requires the repair of cultural treasures. Virtual reality (VR), which offers realistic representations and immersive experiences, has become a viable instrument for the restoration of cultural treasures as a result of technological advancements. This research explores the use of sophisticated 3D modelling, rendering, and simplification techniques to digitalize cultural artefacts. The study employs a carefully selected set of 3D models from the publicly available Sketchfab website to examine objects that are representative of cultural heritage, such as the Ashoka Tower, the Tibetan Sacred Props, and the Haihun Marquis Mausoleum. The primary objective is to evaluate how well different rendering algorithms capture and preserve the fine features of these cultural treasures while maximizing computing efficiency. To improve the produced models' visual integrity, the research starts by examining the fundamentals and uses of texture mapping, lighting models, and material attributes. A comparison examination of the original and simplified models is then carried out to assess the trade-offs between rendering time and visual quality in terms of performance. In weighing computing resources against preservation goals, this comparison offers crucial insight on the viability of simplification strategies. The findings highlight how important it is to utilise digital tools to preserve, analyze, and share cultural assets. Through the demonstration of the capabilities of cutting-edge 3D modelling and rendering techniques for capturing and spreading the rich historical and cultural importance embodied by artefacts from many traditions and civilizations, this study adds to the growing area of digital cultural preservation. This study contributes to the continuing conversation about utilising technology in the digital age to protect and promote cultural heritage.
3D reconstruction methods for digital preservation of cultural heritage: A survey

Leonardo Gomes,Olga Regina Pereira Bellon,Luciano Silva

DOI: https://doi.org/10.1016/j.patrec.2014.03.023

IF: 4.757

2014-12-01

Pattern Recognition Letters

Abstract:3D reconstruction, refers to capturing and reproducing the shape and appearance of an arbitrary object or scene given depth and color information. This is a broad research area within the computer vision field involving many stages and still open problems. The digital preservation of cultural heritage is a specially challenging application of 3D reconstruction. Cultural heritage objects and sites greatly differ from each other and a maximized fidelity of the 3D reconstruction is a core requirement. The literature on this topic has substantially increased in the past years, mostly due to the variety of scenarios and the development of new depth sensing devices as well as techniques able to deal with this issue. In our search to develop a complete 3D reconstruction pipeline, we have comprehensively studied techniques related to this topic and divided the 3D digitization process in four major overviews: image acquisition, view registration, mesh integration and texture generation. We present the state-of-the-art approaches and challenges of each stage.

computer science, artificial intelligence
A Texture Selection Approach for Cultural Artifact 3D Reconstruction Considering Both Geometry and Radiation Quality

Shirui Hu,Zhiyuan Li,Shaohua Wang,Mingyao Ai,Qingwu Hu

DOI: https://doi.org/10.3390/rs12162521

IF: 5

2020-01-01

Remote Sensing

Abstract:3D reconstruction of culture artifacts has great potential in digital heritage documentation and protection. Choosing the proper images for texture mapping from multi-view images is a major challenge for high precision and high quality 3D reconstruction of culture artifacts. In this study, a texture selection approach, considering both the geometry and radiation quality for 3D reconstruction of cultural artifacts while using multi-view dense matching is proposed. First, a Markov random field (MRF) method is presented to select images from the best angle of view among texture image sets. Then, an image radiation quality evaluation model is proposed in the virtue of a multiscale Tenengrad definition and brightness detection to eliminate fuzzy and overexposed textures. Finally, the selected textures are mapped to the 3D model under the mapping parameters of the multi-view dense matching and a semi-automatic texture mapping is executed on the 3DMax MudBox platform. Experimental results with two typical cultural artifacts data sets (bronze wares and porcelain) show that the proposed method can reduce abnormal exposure or fuzzy images to yield high quality 3D model of cultural artifacts.
Image Processing and Restoration of Cultural Relics of Song Dynasty in Sichuan Based on 3D Modeling Technology

Qinbing He,Qiwang Zhao,Zhongyun Wu

DOI: https://doi.org/10.1007/978-981-16-5854-9_14

2021-09-27

Abstract:A large number of Song Dynasty artifacts and decoration images in Song tombs unearthed in Sichuan area are rich in content, unique in shape, and ingenious in composition. They are an important part of the history of ancient Chinese art and an important physical example for the study of ancient Chinese history. This article aims to use modern computer science and technology such as 3D modeling to store unearthed cultural relics and their exquisite images, restore artifacts, realize the matching of plane photos and 3D models, and visually present the overall appearance of the relics, thereby providing more abundant materials to promote archeology for the public and museum exhibitions.
Modeling Method for Large-Scale Cultural Heritage Sites and Objects Using Real Geometric Data and Real Texture Data

HU Shao-xing,ZHA Hong-bin,ZHANG Ai-wu

DOI: https://doi.org/10.3969/j.issn.1004-731x.2006.04.035

2006-01-01

Abstract:Digital preservation of cultural heritage sites and objects has become a global problem.A real 3D digital method for culture heritage sites and objects was proposed using 3D laser scanners and CCD cameras.Firstly,the laser scans were preprocessed for noise removal and holes filling.Next step was using an improved ICP algorithm to register multiple laser scans step-by-step.Finally,a volumetric-based algorithm was used to construct a coherent 3D mesh that enclosed all range scans,and real 3D models of cultural heritage sites and objects were created through texture mapping.The examples of constructing 3D models of buildings and grottos have been presented,and the prefect results have been obtained.
Fragmented cultural relics restoration based on point cloud data

Yahui Ding,Hongjuan Wang

DOI: https://doi.org/10.1117/12.2653801

2022-11-18

Abstract:Three-dimensional scanning technology, graphic image processing, virtual reality and other technologies are an important and inevitable way to protect cultural relics. With the passage of time, most of the cultural relics have been removed. Aiming at the main process of fragmenting cultural relics restoration based on point cloud processing, this paper summarizes the algorithms of 3d data denoising and simplification, model feature extraction, model classification and model assembling in virtual restoration of fragmenting cultural relics.

Art,Computer Science,Engineering
Real 3D Digital Method for Large-Scale Cultural Heritage Sites

SX Hu,HB Zha,AW Zhang

DOI: https://doi.org/10.1109/iv.2005.104

2006-01-01

Abstract:Digital preservation of cultural heritage sites has become a global problem. The paper proposes a real 3D digital method for culture heritage sites using 3D laser scanners and CCD cameras. Firstly, we preprocess the laser scans for noise removal and hole filling. Next step is using an improved ICP algorithm we present step-by-step registration to align all range scans into a common coordinate system. And then, we proposed a filtering of 3D data compression and use a volumetric-based algorithm for the construction of a coherent 3D mesh that encloses all range scans. Finally, through texture mapping, we obtain real 3D and real texture models. The example of the construction of the 3D model of buildings and grottos are presented.
Reconstruction of 3D digital heritage objects for VR and AR applications

Sinh Van Nguyen,Son Thanh Le,Minh Khai Tran,Ha Manh Tran

DOI: https://doi.org/10.1080/24751839.2021.2008133

2021-12-02

Journal of Information and Telecommunication

Abstract:Constructing the 3D objects based on geometric modelling and graphical techniques is a well-known research activity applied in computer graphics. Techniques to process graphical models are widely used in the field of digital heritage and 3D game. Virtual reality (VR) and Augmented Reality (AR) are technical trends nowadays that can be studied and used in digital high-tech fields like medical training, digital heritage, entertainment industry, digital tourism and museum, etc. In this research, we present a new proposed method for reconstructing the 3D objects of tangible cultural heritages in the virtual environment based on the combination of geometric modelling, computer graphics, VR and AR technologies. The method consists of the following steps: we first collect data of a real object by using a 3D scanner. After processing obtained data, the output is a 3D point cloud. In the next step, we remove noisy data and triangulate the object surface. The novelty point focuses on reconstructing the 3D object by filling the holes. At the end, we build VR and AR applications for visualizing a virtual museum. The contribution of this research leads to open the door for applying in other fields such as 3D Game industry or digital tourism.
Research on Key Technologies of Three-dimensional Digital Reconstruction of Cultural Heritage in Historical and Cultural Blocks

Xuedong Xu,Wei Sun,Hua Li

DOI: https://doi.org/10.1109/CTMCD53128.2021.00054

2021-04-01

Abstract:Historical and cultural blocks have both history, aesthetics, architecture and other civilized features, and are regarded as the carrier of human urban cultural heritage. Virtual reality (VR) technology has the characteristics of visualization and high immersion, and is currently an important way of digital protection of cultural heritage and tourism display.The traditional VR cultural heritage digitization system is expensive to develop, and there is an urgent need to study a reusable virtual reconstruction development system for cultural and tourism resources. Taking the historical and cultural blocks of the First Automobile Manufacturing Plant as the object, based on geography, imagery, and actual measurement data, and using the "component library + service + interface" as the reuse architecture, research on the reusable virtual tourism application reconstruction system. The key technologies for the project solution include basic data standardization, multi-source data fusion modeling, model coordinate transformation and matching, color collection and restoration. The results can be used for the development of a three-dimensional virtual platform for large-scale historical and cultural blocks.

Computer Science,History,Art,Engineering
3D Real Scene Data Collection of Cultural Relics and Historical Sites Based on Digital Image Processing

Feng Li,Hui Zhao

DOI: https://doi.org/10.1155/2022/9471720

2022-07-21

Abstract:Traditional digital geometry mainly focuses on local geometric features such as curvature and normal of 3D models. Although the curvature can describe the geometric curvature of the model surface, these local geometric properties cannot describe the global functional structure and associated properties of the 3D model. The purpose of this paper was to study the accurate splicing of cultural relic fragments based on the intrinsic structural features of the 3D model, such as geometry, texture, and function, whose method is the key to realizing the virtual reconstruction of damaged cultural relics. In this paper, a method for analyzing the intrinsic structure of 3D point cloud data is proposed, the feature representation method of 3D discrete curves and surfaces is studied, and a method for identifying geometric features of 3D point clouds based on the similarity measure of the principal curvature is proposed, which realizes the effective extraction of geometric features of the 3D point cloud model of cultural relics. By calculating the visual curvature distribution of the model under multiscale constraints, the effective extraction of the structural primitives of cultural relics with rich surface noise is realized. The experimental results in this paper show that the initial matching time is 1.416 seconds, the final matching time is 1.555 seconds, the average number of iterations is 13, the average stitching error is 1.7233 mm, and the standard deviation is 1.0265 mm. The experimental data show that the algorithm proposed in this chapter has good convergence characteristics and effectively avoids the divergence phenomenon that is easy to occur in the existing stitching algorithms.
Application of 3D Printing Technology in Cultural Relic Protection

Jiaxin Tian,Yankun Zhao,Liang Wu,Changzhong Wu

DOI: https://doi.org/10.4108/eai.17-6-2022.2322746

Abstract:: China's ancient cultural relics have been weather-beaten, has been damaged to a large extent, so this requires us to use a reasonable method to restore cultural relics, but also to avoid the problem of secondary damage to cultural relics. This article will explain some feasible schemes of 3D printing in the restoration of ancient cultural relics from the following aspects, and put forward specific restoration processes. It is hoped that through the advantages and disadvantages of 3D printing in cultural relic restoration proposed in this paper, a new way of thinking is proposed for the relevant staff of this technology.

History,Engineering,Materials Science

Key Techniques on Cultural Relic 3D Reconstruction

Interactive High Resolution Texture Mapping for the 3D Models of Cultural Heritages

Modeling and immersive display of cultural heritage

Relic Protection and Digitization Technology

A Novel Approach to 3D Reconstruction Technology of Small Cultural Relics Based on Spatial Coded Texture Image Projection

A METHOD OF 3D MEASUREMENT AND RECONSTRUCTION FOR CULTURAL RELICS IN MUSEUMS

Dunhuang Cave Virtual Rebuilding and Mural Restoration Simulating

A Study of Digital Information Recording Technology for Multiform-dimension Objects

Web3d Technology And Its Application In The Cultural Relic Protection

3d Digitization And Its Applications In Cultural Heritage

Cultural Relics Restoration Technology in Virtual Reality: Application of 3D Modeling and Rendering Algorithms in Cultural Relics Digitization

3D reconstruction methods for digital preservation of cultural heritage: A survey

A Texture Selection Approach for Cultural Artifact 3D Reconstruction Considering Both Geometry and Radiation Quality

Image Processing and Restoration of Cultural Relics of Song Dynasty in Sichuan Based on 3D Modeling Technology

Modeling Method for Large-Scale Cultural Heritage Sites and Objects Using Real Geometric Data and Real Texture Data

Fragmented cultural relics restoration based on point cloud data

Real 3D Digital Method for Large-Scale Cultural Heritage Sites

Reconstruction of 3D digital heritage objects for VR and AR applications

Research on Key Technologies of Three-dimensional Digital Reconstruction of Cultural Heritage in Historical and Cultural Blocks

3D Real Scene Data Collection of Cultural Relics and Historical Sites Based on Digital Image Processing

Application of 3D Printing Technology in Cultural Relic Protection