Abstract:In the past decade, boron neutron capture therapy utilizing an accelerator-based neutron source (ABNS) designed primarily for producing epithermal neutrons has been implemented in the treatment of brain tumors and other cancers. The specifications for designing an epithermal beam are primarily based on the IAEA-TECODC-1223 report, issued in 2001 for reactor neutron sources. Based on this report, the latest perspectives and clinical requirements, we designed an ABNS capable of adjusting the average neutron beam energy. The design was based on a 2.8 MeV, 20 mA proton beam bombarding a lithium target to produce neutrons that were subsequently moderated and tuned through a tunable beam shaping assembly (BSA) which can modify the thicknesses and materials of the coin-shaped moderators, back reflectors, filters, and collimators. The simulation results demonstrated that epithermal neutron beams for deep seated tumor treatment, which were generated by utilizing magnesium fluoride with lengths ranging between 28 and 36 cm as the moderator, possessed a treatment depth of 5.6 cm although the neutron flux peak shifts from 4.5 to 1.0 keV. When utilizing a thinner moderator, a less accelerated beam power can meet the treatment requirements. However, higher powers reduced the treatment time. In contrast, employing a thick moderator can reduce the skin dose. In scenarios that required relatively low energy neutron beams, the removal of the thermal neutron filter can raise the thermal neutron flux at the beam port. And the depth of the dose rate peak could be adjusted between 0.25 and 2.20 cm by combining magnesium fluoride and polyethylene coins of different thicknesses. Hence, this device has a better adaptability for the treatment of superficial tumors. Overall, the tunable BSA provides greater flexibility for clinical treatment than common BSA designs that can only adjust the port size.

The beam monitor system for heavy ion shallow in tumor therapy

The Beam Monitor System for Heavy Ion Shallow in Tumor Therapy

Solid tumor conical scattering laser therapeutical system

Beam Diagnostic Control System for Shallow-Seated Tumor Therapy Terminal at HIRFL

Prototype Design of Readout Electronics for In-Beam TOF-PET of Heavy-Ion Cancer Therapy Device

A beam range monitor based on scintillator and multi-pixel photon counter arrays for heavy ions therapy

A beam monitor using silicon pixel sensors for hadron therapy

A Beam Monitor for Ion Beam Therapy Based on HV-CMOS Pixel Detectors

Development and Commissioning of the Beam Diagnostics for CIAE Proton Therapy Beamline System

Research on photogrammetry-based positioning of heavy ion radiotherapy and tumor target monitoring

An in-vivo treatment monitoring system for ion-beam radiotherapy based on 28 Timepix3 detectors

Radioactive ray monitoring and treating system

An integrated system for measuring 3D dose distributions of carbon-ion pencil beams in regular QA practice

Design and Development of the Beamline for a Proton Therapy System

Beam distribution homogenization design for laser-driven proton therapy accelerator

[The Basic Structure of Heavy-Ion Tumor Therapy Facility].

Design of a Compact Beam Transport System for Laser-Driven Proton Therapy

Coin-structured Tunable Beam Shaping Assembly Design for Accelerator-Based Boron Neutron Capture Therapy for Tumors at Different Depths and Sizes

A New Multi-Strip Ionization Chamber Used As Online Beam Monitor for Heavy Ion Therapy

A dedicated in-beam PET system with a modular dual-head for radiotherapy imaging in HIMM

A prototype scintillating fibre beam profile monitor for Ion Therapy beams