Abstract:This paper presents a mathematical model developed for an electrostatically levitated micromotor in which the ring-shaped rotor is levitated by electrostatic force in five degrees of freedom (DOFs). A glass/silicon/glass sandwich structure is utilized in this electrostatic micromotor, which is based on the technology of micro-electro-mechanical systems (MEMS). In the center of ring-shaped cavity formed by ICP between the top and bottom glass plates, the rotor is levitated by the five DOFs position servo system and driven by speed control system. In this paper, the mathematical model for the motion control of the rotor in five DOFs is developed. This model describes the capacitances and electrostatic forces between the rotor and associated electrodes, and moments of two rotations about the x, y-axis. The rotational torque model governing the rotor's rotational speed is also described. In order to obtain the analytical nonlinear models for error analysis, these integral equations are expanded using the Taylor's series. Moreover the finite element model and its simulation results are obtained by using ANSYS. In terms of comparison between the simulated results and the nonlinear models, the modeling accuracy of the micromotor can be evaluated. Furthermore, the error characteristics of the linearized models via rotor displacement are analyzed. Thus, position sensing and control of both the rotor's motion, and the rotational speed, can be achieved based on these linearized models of electrostatically levitated micromotors. Copyright © 2007 by ASME.

Numerical simulation on the effects of van der Waals forces in micro-rotor systems

Investigation of Electromagnetic Forces Acting on Rotor Considering Modulation Effect of Surface-Mounted Pole Structure

Micro-rotor Dynamics for Micro-Electro-mechanical Systems (MEMS)

Nonlinear dynamics of a rub-impact micro-rotor system with scale-dependent friction model

Contact Analysis of the Rotor in A Variable Capacitance Micro-Motor

Study on Control Mechanism of Asymmetric Vortices over Slender Body Using MEMS Device

Numerical simulation of sliding wear between the rotor bushing and ground plane in micromotors

Aerodynamic Simulation of a Typical Multirotor e VTOL Aircraft Configuration.

Air Damping Torques of Electrostatically Levitated Rotational Microgyro under High Knudsen Number Condition

Non-Linear Dynamic Analysis of the Ultra-Short Micro Gas Journal Bearing-Rotor Systems Considering Viscous Friction Effects

Modeling of an electrostatic micromotor based on a levitated rotor

Vibration Characteristics of Aeroengine's Rotor System During Maneuvering Flight

Modeling and Analysis of A Micromotor with an Electrostatically Levitated Rotor

Nonlinear dynamic characteristics of a micro-rotor system with rub-impact in MEMS

NONLINEAR DYNAMIC CHARACTERISTICS ANALYSIS OF MICRO-ROTOR SYSTEM WITH RUB-IMPACT

Stability, Bifurcation and Chaos of a High-Speed Rub-Impact Rotor System in MEMS

Contact Dynamics Between the Rotor and Bearing Hub in an Electrostatic Micromotor

Considering Van Der Waals Forces in Micromanipulation Design

Influence of Van Der Waals Force on Dynamic Character of Magnetic Head/Disk

Friction and Wear Study of the Hemispherical Rotor Bushing in a Variable Capacitance Micromotor

Effects of van der Waals force on nonlinear vibration of electromechanical integrated electrostatic harmonic actuator