Abstract:Purpose - The purpose of this paper is to discuss motion planning about crossing obstacles and welding trajectory for a new-model mobile obstacle-crossing welding robot system. The robot can cross the obstacle in this way that one of the three adhesion mobile parts is pulled off the ground in turn. An optimal obstacle-crossing approach needs to be studied to improve the welding efficiency.Design/methodology/approach - According to the characteristics of this mobile welding robot, two methods for crossing obstacles are compared. A special method is used for obstacle-crossing and welding. The kinematic model is established. By the optimization method, the optimum parameters for crossing obstacles are calculated. The welding speed when the robot is crossing the obstacle is very important, so its value must be in a certain range. Finally, the tracks of the wheels when the robot is crossing the obstacle are analyzed in order to observe the obstacle-crossing process.Findings - According to the analysis, the maximum speed of the vehicle in the obstacle-crossing is determined. When crossing the obstacle, the robot can do welding simultaneously. The welding speed cannot exceed a certain value. In the obstacle-crossing process, the tracks of the wheels can reflect the process. According to the obtained conclusion, the obstacle-crossing experiments are successfully completed, and the welding effect is good. The results can prove that the proposed method is feasible. Research limitations/implications The speed of obstacle-crossing is not very large. It has some relationships with the lifting speed of the wheels, which is determined by the quality of drive motor. More efficient robot must be developed to meet the needs of industrial robot. Practical implications Based on the excellent obstacle-crossing and welding capabilities, the robot with the new mechanism has a widely applying prospect in the field of welding and inspecting large equipment.Originality/value - The obstacle-crossing approach has certain innovation. The way that the robot can maintain continuous welding when crossing the obstacle is of a great significance.

Obstacle Crossing Ability of a New Wheel-Based Cable Climbing Robot

Climbing robot based on triangle wheels obstacle crossing design: modeling simulation and motion analysis

Design and Performance Analysis of a Tracked Wall-Climbing Robot for Ship Inspection in Shipbuilding

Study on a Novel Wheel Type Tree-Climbing Robot

Development and Experimental Study of Multi-Motion Model Robot with Wheel-Track Compound Structure

Research on a control method of tunnel cable inspection track robot based on intelligent obstacle crossing

The Mechanism Design of a Wheeled Climbing Welding Robot with Passing Obstacles Capability

Kinematics Analysis for Obstacle-Climbing Performance of a Rescue Robot.

Analysis on the Crossing Obstacle of Wheel-Track Hybrid Mobile Robot

Design and analysis of wheel-tracked composite magnetic adsorption wall-climbing robot

High climbing and obstacle-crossing performance intelligent tracked inspection robot for cable trenches

Motion Planning For A New-Model Obstacle-Crossing Mobile Welding Robot

Elastic Obstacle-Surmounting Pipeline-Climbing Robot with Composite Wheels

New Mechanism to Pass Obstacles for Magnetic Climbing Robots with High Payload, Using Only One Motor for Force-Changing and Wheel-Lifting

The climbing performance analysis of a robot for power line inspection with retractable double serial manipulators

Obstacle-crossing strategy and formation parameters optimization of a multi-tracked-mobile-robot system with a parallel manipulator

Research on Climbing Robot for Transmission Tower Based on Foot-End Force Balancing Algorithm

Self-Adaptive Obstacle Crossing of an AntiBot From Reconfiguration Control and Mechanical Adaptation

Design and motion analysis of reconfigurable wheel-legged mobile robot

Design of A Novel Wheel-Legged Robot with Rim Shape Changeable Wheels