Abstract:In this paper, two novel broadband in-phase and out-of-phase waveguide power dividers with high isolation are presented. Based on the substrate-integrated waveguide (SIW) divider and SIW-to-waveguide transition circuit, two kinds of E-plane waveguide dividers have been implemented. Due to the features of in-phase and out-of-phase performances, the proposed waveguide dividers can provide much more flexibilities than that of conventional E-plane waveguide T-junction. A broadband phase and amplitude performances are achieved across the whole Ka-band owing to the wideband characteristic of the SIW divider and transition circuits. To minimize the size and loss of the divider, a compact and low-loss SIW-to-waveguide transition circuit has been developed using the antisymmetric tapered probes. Two prototypes of the Ka-band waveguide dividers, including the in-phase and out-of-phase types, have been fabricated and measured. Measured results show that the isolation, input return loss, output return loss, amplitude imbalance, and phase imbalance of the in-phase divider are better than 15.5, 13.1, 10.8, 0.4 dB, and 3.5(0), while those of the out-of-phase divider are better than 15.0, 13.4, 10.4, 0.5 dB, and 3.6(0), respectively, over the frequency range from 26.5 to 40 GHz. The measured results agree well with the simulated ones. Considering their wide bandwidth, high isolation, good port matching performance, and compact configuration, the two types of waveguide dividers can be good candidates for broadband applications in millimeter-wave waveguide systems.

A Broad-Band 3-Db In-Phase Divider for Millimeter-Wave Lengths

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

A Broadband Waveguide-Based Power Divider in W-band

Broadband Millimeter-Wave In-Phase and Out-of-Phase Waveguide Dividers with High Isolation

Wideband Switchable In-Phase and Out-of-Phase Power Divider with Finite-Ground Microstrip Line

Broad‐band Power Divider Based on Radial Waveguide

Ultra‐wideband Power Divider Employing Coupled Line and Short‐ended Stub

A Waveguide Power Divider/combiner Using Microstrip E-plane Dual-Probe Structure

A MICROSTRIP PROBE COAXIAL WAVEGUIDE POWER DIVIDER/COMBINER

Four-way power divider/combiner based on waveguide-microstrip structure in W-band

Broadband Multilayer In-Phase Power Divider

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Design of an Ultra-Wideband Power Divider with Good In-Band Performance and Sharp Roll-Off Skirt

A compact ultra-wideband power divider with high isolation

Millimeter Wave Compact Power Divider Based on Micro-coaxial Lines

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

A Novel Wideband Filtering Power Divider With Embedding Three-Line Coupled Structures.

An Isolated Out-of-Phase 3-dB Power Divider via Waveguide-to-Microstrip Transition

A New Millimeter-wave Multi-way Power Dividing/Combining Network Based on Waveguide-Microstrip E-plane Dual-Probe Structure

X-band Broadband Substrate Integrated Rectangular Waveguide Power Divider

Compact Quasi-Planar Broadband Rectangular Ring-Cavity Power Divider Using Inserted Ground Waveguide Probe