Abstract:This study conducts an in-depth evaluation of imaging algorithms and software and hardware architectures to meet the capability requirements of real-time image acquisition systems, such as spaceborne and airborne synthetic aperture radar (SAR) systems. By analysing the principles and models of SAR imaging, this research creatively puts forward the fully parallel processing architecture for the back projection (BP) algorithm based on Field-Programmable Gate Array (FPGA). The processing time consumption has significant advantages compared with existing methods. This article describes the BP imaging algorithm, which stands out with its high processing accuracy and two-dimensional decoupling of distance and azimuth, and analyses the algorithmic flow, operation, and storage requirements. The algorithm is divided into five core operations: range pulse compression, upsampling, oblique distance calculation, data reading, and phase accumulation. The architecture and optimisation of the algorithm are presented, and the optimisation methods are described in detail from the perspective of algorithm flow, fixed-point operation, parallel processing, and distributed storage. Next, the maximum resource utilisation rate of the hardware platform in this study is found to be more than 80%, the system power consumption is 21.073 W, and the processing time efficiency is better than designs with other FPGA, DSP, GPU, and CPU. Finally, the correctness of the processing results is verified using actual data. The experimental results showed that 1.1 s were required to generate an image with a size of 900 × 900 pixels at a 200 MHz clock rate. This technology can solve the multi-mode, multi-resolution, and multi-geometry signal processing problems in an integrated manner, thus laying a foundation for the development of a new, high-performance, SAR system for real-time imaging processing.

Implementation of Spaceborne SAR Imaging Processor Based on FPGA

Design and Implementation of Visual Processing System Based on FPGA

The Implement of Spaceborne SAR Imaging System

Real-Time SAR Imaging System Design Based on FPGA

Parallel Optimisation and Implementation of a Real-Time Back Projection (BP) Algorithm for SAR Based on FPGA

Research of high speed image processing system based on FPGA

FPGA-based Parallel System for Synthetic Aperture Radar Imaging

Real-Time Spaceborne Synthetic Aperture Radar Float-Point Imaging System Using Optimized Mapping Methodology and a Multi-Node Parallel Accelerating Technique

FPGA-Based Parallel Processing for Fast Time-Domain Imaging Algorithm of SAR

On-chip Data Organization and Access Strategy for Spaceborne SAR Real-Time Imaging Processor

System structure design of spaceborne SAR real time imaging processing

An FPGA-Based Four-Channel 128K-Point FFT Processor Suitable for Spaceborne SAR

Storage and Pretreatment of SAR Signal Based on FPGA

Design and Implementation of a Multi-Channel Space-Borne SAR Imaging System on Vivado HLS

Realization Of Sar Real-Time Processor By Fpga

FPGA-Based Implementation of Ship Detection for Satellite On-Board Processing

An Efficient Dual-Channel Data Storage and Access Method for Spaceborne Synthetic Aperture Radar Real-Time Processing

Design of High-performance Super-resolution Spaceborne SAR Real-time Imaging Chip

Constrained Optimization of FPGA Design for Spaceborne InSAR Processing.

A Pre-Processing and Storage Unit of an On-Board Space-Borne SAR Quick-Look System

Architecture design of spaceborne SAR imaging processing system