Abstract:Three conjugated copolymers containing different length of oligo(p-phenylene ethynylene) moieties (OPE) connecting at the bay position of N,N'-dioctylperylene-3,4:9, 10-tetracarboxylic acid bisimide were designed and synthesized. The three OPE monomers were prepared according to a stepwise synthesis method. This method involves two sets of reaction conditions: desilylation and Pd/Cu-catalyzed coupling. In every two steps, 2,5-dihexyloxy-4-[(trimethylsilyl)ethynyl]iodobenzene was coupled with the diethynyl compounds which were desilylated from the di (trimethylsilyl)-ethynyl compounds. Through this approach, undesired oligomerization was avoided and OPE monomer, trimer, pentamer were readily prepared in high purity. The bromination of perylene bisanhydride was carried out under reaction condition with a more than two-fold of bromine in 98% sulfuric acid. After imidization by n-octylamine with acetic acid as catalyst in NMP, the resultant compound was soluble in dichloromethane, which facilitated its purification. The coupling polymerization was performed by a standard Sonagashira reaction between the acetylene-terminated OPE monomers and perylene monomer, leading to the final three alternative copolymers (PI, P2, P3) After polymerization reaction has been finished, all polymers dissolved in chloroform and then reprecipitated in methanol for three times, followed by Soxhlet extraction with acetone for 48 It to remove residual catalyst and monomers. The structures of the three polymers were characterized by IR, Elementary analysis and GPC. P1 has limited solubility in common solvents such as THF, dichloromethane, toluene, etc, due to the high rigidity of the backbone as well as the high content of perylene. But the solubility of P2 and P3 was improved dramatically. The photophysical characteristics of the polymers were investigated by UV-Vis and PL spectra in solution. In UV-Vis, the absorptions of perylene in polymers show a large red-shift (nearly 170 nm) compared to that of the perylene monomer, indicating a strong interaction between electron donor and acceptor on the ground state. Together with a non-interfered conjugated backbone, all polymers absorb from 350 to 900 our which makes them promising in photovoltaic applications. In PL, experiments, when exciting the perylene part, a complete fluorescent quenching was observed in all three polymers, which can be attributed to the electron transfer process between the electron donor and acceptor induced by excitation of the electron acceptor segment to a charge separated state. When exciting the OPE unit in each polymer, only the emission from the OPE chromorphore was observed in all three polymers. Cyclic voltammetry (CV) was used to assess the electrochemical behavior of the polymers. All three polymers show a reversible reduction wave, an it-reversible wave in the more negative field and an irreversible oxidation wave. The first reversible reduction wave comes from the n-doping of perylene unit in polymers. From P1 to P3, the onset potential of first reduction wave decreases, which is in accordance with the p-doping degree increasing in each polymer. At the oxidation side, the onset potential of oxidation goes to the opposite way that is increasing from P1 to P3. By changing the amount of electron donating or accepting content in the polymers, the electronic proper-ties of the corresponding polymers can be manipulated, which can serve as a guide for new material design in the kind and facilitating the photovoltaic device fabrication.It is hoped that these new polymers would be a proising candidate used for polymeric solar cells.

Layer-by-layer Deposited Multilayer Films of Oligo(pyrenebutyric Acid) and a Perylene Diimide Derivative: Structure and Photovoltaic Properties.

Layer-by-layer self-assembled multilayer film of cationic oligo-(phenylene vinylene) and polyelectrolytes based on electrostatic interaction

Layer-by-layer self-assembled multilayer films containing the organic pigment, 3,4,9,10-perylenetetracarboxylic acid, and their photo- and electroluminescence properties

Synthesis, Characterization, and Electroluminescent Properties of a Novel Perylene‐containing Copolyimide

Investigation of the Characteristic of Solution‐Processed Tetraphenyldibenzoperiflanthene (DBP) Film and Its Application on Organic Photovoltaic Cells

Versatile Self‐Assembled Monolayer Material Enables Efficient Organic Photovoltaic Devices and Modules

A series of perylene diimide cathode interlayer materials for green solvent processing in conventional organic photovoltaics

Solution Processable N-Type Perylene Diimide Copolymers for Organic Photovoltaics

Durable Organic Photovoltaics Enabled by a Morphology‐Stabilizing Hole‐Selective Self‐Assembled Monolayer

Synthesis, Optical and Electrochemical Properties of Novel Copolymers Containing Oligo(P-Phenylene Ethynylene) Moieties Connect at Bay Position of Perylene Bisimide

Multi-layer transparent electrodes for high performance bifacial perovskite solar cells

Covalently Attached Multilayer Assemblies Containing Photoreactive Diazo-Resins and Conducting Polyaniline

Layer-by-layer Assembly and Characterization of Multilayers of a Manganese Porphyrin Linked Poly(4-Vinylpyridinium) Derivative and Poly(styrenesulfonic Acid-O-maleic) Acid.

Multilayer Film Fabrication And Photoelectric Conversion Property Of Two Pyrrolidinofullerene Carboxylic Acid Derivatives

Improving the performance of organic solar cells using an electron transport layer of B4PyMPM self-assembled nanostructures

New Perylene Diimide Ink for Interlayer Formation in Air-Processed Conventional Organic Photovoltaic Devices

Deciphering the Morphology Evolution of Layer‐by‐Layer Processing Via In Situ Spectroscopy Measurement for High‐Performance Organic Photovoltaics

Developing Perylene Diimide Based Acceptor Polymers for Organic Photovoltaics

Pd(Ii)-Directed Layer-By-Layer Assembly of Multiporphyrin Arrays on Silica Nanoparticle Surfaces for Photocurrent Generation and Photochromism of Viologens

19.10% Efficiency and 80.5% Fill Factor Layer‐by‐Layer Organic Solar Cells Realized by 4‐Bis(2‐thienyl)pyrrole‐2,5‐Dione Based Polymer Additives for Inducing Vertical Segregation Morphology

Organic Photovoltaics Incorporating Electron Conducting Exciton Blocking Layers