Studies on Demulsification of Caoqiao Heavy Oil-in-Water Emulsions

Chuan-Xian LI,Fei YANG,Ming-Zhen LIN,Gang GUO
DOI: https://doi.org/10.3969/j.issn.1000-4092.2008.01.021
2008-01-01
Abstract:The crude oil produced in Caoqiao oil field,Shengli,is characterized by high resin+asphaltene content,28.8%+0.86%,low wax content,3.58%,high density,0.983 g/cm3 at 20℃,high viscosity,12.8 Pa·s at 50℃,and low pour point,5℃,and has poor fluidity at low temperatures.The crude oil is mixed with 10 g/L aqueous solution in oil to water volume ratio 7∶3 to make an O/W emulsion and 6 commercial crude oil demulsifiers(Binzhou's SP169,RP,JHB2,BH202,and BCL-405 and Sigma's EPE) are taken at dosage 200 mg/L to demulsify this emulsion at 60℃.For all these demulsifiers,the percentage dehydration of the O/W emulsion is high but the water separted is rather cloudy.A binary combination,SP169/EPE,is shown to be most effective,giving 100% hydration and clear separated water,and the optimal working parameters are as follows:SP169/EPE mass ratio about 1∶1;combinational demulsifier dosage 150~200 mg/L;dehydration temperature 50~60℃;time duration 30 min.With NaCl introduced at dosage 20 g/L,the demulsification dehydration of the O/W emulsion by the combinational demulsifier is speeded up and completed in 15 min with separated water clearness further improved.The demulsifying mechanisms are discussed.
What problem does this paper attempt to address?