Abstract:Thermal conductivity enhancement coupled to nanoparticle dispersion stability over time are the two main conflicting requirements to overcome to develop carbon nanomaterial-based nanofluids. Both covalent and non-covalent approaches, having their own advantages and disadvantages, are commonly used for carbon nanotube based nanofluids development. However, they are rarely compared regarding their impact on stability and thermal conductivity performances for the same kind of nanofluid. In this work, multiwalled carbon nanotubes have been chemically modified by both covalent and non-covalent functionalization. For the covalent functionalization, a simple oxidation method is applied. It consists of refluxing the powdered MWCNTs in H 2 SO 4 /HNO 3 at 5 M concentration. For the non-covalent approach, both an anionic (sodium dodecyl sulfate) and a non-ionic (Pluronic P123, comprising poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) in an alternating linear fashion, PEO-PPO-PEO) surfactants were employed at a concentration of 1 wt%. Nanofluids were prepared with multiwalled carbon nanotubes at a fixed concentration of 0.2 wt% for both chemical modification approaches. The oxidation reaction occurs without significant structure damaging as shown by transmission electron microscopy, Raman spectroscopy, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. UV–visible spectrophotometry analysis shows a remarkable stability with temperature in the 293.15–303.15 K range over one-week and for a longer period of 49 days for all the three types of nanofluids. Their thermal conductivity has been investigated in the same temperature range. For all the three nanofluid series prepared with a fixed concentration of carbon nanomaterials, a thermal conductivity enhancement compared to that of the base fluid has been observed. The thermal conductivity evolution with temperature is different for each type of nanofluid. The covalently oxidized multiwalled carbon nanotube based nanofluids showed the better thermal conductivity enhancement steadiness (around 7 %) with temperature. The discussion on the surfactant-based nanofluid behavior proposes the possible involved mechanisms as temperature increases for each surfactant.

The synthesis of a second generation of end of nanofluids based on carbon nanotubes

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

Effects of Surface Modification on the Pool Boiling Heat Transfer of MWNTs/water Nanofluids

Improving the Performance of Polyamide Reverse Osmosis Membrane by Incorporation of Modified Multi-Walled Carbon Nanotubes

A Simple Polymerizable Polysoap Greatly Enhances the Grafting Efficiency of the “Grafting-To” Functionalization of Multiwalled Carbon Nanotubes

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

SOLUBILITY IMPROVEMENT AND SURFACE FUNCTIONALIZATION OF MULTI-WALLED CARBON NANOTUBES BY A THIOL-FUNCTIONALIZED POLY(PHENYLACETYLENE) DERIVATIVE

Enhanced Dispersion of Nanotubes in Organic Solvents by Donor-Acceptor Interaction Between Functionalized Poly(Phenylacetylene) Chains and Carbon Nanotube Walls

Preparation of high-flux thin film nanocomposite reverse osmosis membranes by incorporating functionalized multi-walled carbon nanotubes

Polysiloxane Surfactants For The Dispersion Of Carbon Nanotubes In Nonpolar Organic Solvents

Hydrothermal treatment to prepare hydroxyl group modified multi-walled carbon nanotubes

Preparation of Carbon Nanotube Dispersions in Solutions of Ethoxylated Fatty Alcohols for Modifying Gel Systems

Covalent vs. Non covalent chemical modification of multiwalled carbon nanotubes based-nanofluids: Stability and thermal conductivity steadiness over temperature

Multihydroxy Polymer-Functionalized Carbon Nanotubes: Synthesis, Derivatization, and Metal Loading

Polysiloxane surfactants for the dispersion of carbon nanotubes in non-polar organic solvents

Preparation of binary nanofluid with heat transfer additives by particle surface functionalisation

Solvent-free functionalization and transfer of aligned carbon nanotubes with vapor-deposited polymer nanocoatings

Well-established carbon nanomaterials: modification, characterization and dispersion in different solvents

Study on Amino-Functionalized Multiwalled Carbon Nanotubes

Research on Preparation and Stability of High Viscosity Carbon Nanotube-Modified PAO20-based Magnetic Fluids

Surface Functionalization of Multiwalled Carbon Nanotube with Trifluorophenyl