Abstract:Frequency control is becoming increasingly critical today due to the growing size and changing structure of complex interconnected power networks. Scaling up economic pressures for efficiency and reliability of the power system has necessitated a requirement for maintaining system frequency, and tie-line power flows as close as possible to scheduled values. High-frequency deviations may degrade load performance, damage equipment, resulting in overloading of transmission lines, which may interfere with system protection schemes, and, finally, may also result in an unstable condition of the power system. More so, Load Frequency Control ( LFC) plays a vital role in the modern power system as an auxiliary service to support power exchanges and, at the same time, to provide better conditions for the trading of electricity. Therefore, the tuning of the dynamic controller (i.e., net frequency and net power interchange errors) is a significant factor in achieving optimum LFC performance. Appropriate tuning of the controller parameters is required in order to achieve excellent control action. In view of this, this paper introduces the dynamic tuning of controller parameters in a two-area multi-source power system with an AC-DC parallel tie line for optimum load-frequency control performance. Matlab/Simulink software is used to realize the system simulation. System dynamic performance is observed for conventional PID tuning by the Ziegler Nichols method and the Kitamori method, fuzzy logic controllers, fuzzy-logic PID controllers, fuzzy PID controllers, and polar-Fuzzy controllers. Furthermore, the frequency and tie-line power response of the interconnected areas were compared based on the setting-time, peak-overshoot, and peak-undershoot. The simulation results show that the responses of the fuzzy-based controllers are faster than those of the classical controllers, resulting in minimized frequency and tie-line power deviations.

PI Controller Auto-tuning for Plant-wide Systems Based on Frequency Domain Performance

Performance monitoring and assessment for PID controller

A Pid Controller With Neuron Tuning Parameters For Multi-Model Plants

Data-driven Direct Automatic Tuning Scheme for Fixed-Structure Digital Controllers of Hybrid Systems

Performance assessment of PID controller with time-variant disturbance dynamics

Configuration Analysis and Simulation of Plantwide Process Control Systems Based on Frequency Response

Relay Auto-Tuning Control Technique of PID Based on IAE for a General System with Large Time-Varying Time Delay

Automatic Tuning of Optimal PI Controllers

A simple auto-tuner in frequency domain

A Phase-relevant Closed-loop Frequency-domain Identification Method and Its Application in Optimal Tuning of PI Controllers

Relay Feedback PID Auto-Tuning: Algorithm and Application

Performance Improvement of Three-Phase Boost Power Factor Correction Rectifier Through Combined Parameters Optimization of Proportional-Integral and Repetitive Controller

Robust PI-PD Controller Design: Industrial Simulation Case Studies and a Real-Time Application

Design and Control Aspect of Segmented Proportional Integral-Repetitive Controller Parameter Optimization of the Three-Phase Boost Power Factor Correction Rectifier

Relay Feedback Autotuning Method for Integrating Processes with Inverse Response and Time Delay

Adaptive Proportional Complex Integral Control Strategy of Three-Phase Grid-connected PV Inverter

Relay-Based Autotuning of PID Controller for Improved Load Disturbance Rejection

Dynamic Tuning of the Controller Parameters in a Two-Area Multi-Source Power System for Optimal Load Frequency Control Performance

A Modified Auto-Tuning Method Based on Relay Feedback Identification

PI Control of Statcom Using Fuzzy Set and Auto-Tuning Techniques

PID Controller Parameter Auto Tuning of Power Plant Simulation System