Abstract:During rover lunar exploration missions (such as China's “Chang'e”), rovers are required to move autonomously on the loose lunar soil. Control methods based on the rigidity hypothesis can hardly be expected to satisfy these requirements practically so wheel-soil interaction mechanics should be taken into account. The currently used integral model based on wheel-soil interaction mechanics, however, is complicated, and it cannot be directly applied to the design of a lunar rover's controller. This paper presents a new simplified method of determining the wheel-soil interaction of lunar rovers by introducing a normal stress factor and the ratio of the forward region to the rear region, based on an analysis of the integral model and lunar soil parameters. As an example, numerical analysis is performed for a lunar rover wheel with a width of 165 mm and a radius of 135 mm. Based on a slip ratio as high as 0.4 and an entrance angle that varies from 10° to 40°, the results show that the maximum errors of the model for the calculation of normal force and drawbar pull force are less than 2%, while the maximum error of resistance torque is approximately 5%. When designing a rover's controller, the relationship between the driving torque of wheel T and the drawbar pull of wheel FDP is T = FDPr according to the rigidity hypothesis, a relationship that contradicts the terramechanics model. The proposed simplified model, which is verified by experiments, provides an important basis for the design of a control algorithm for a lunar rover that takes into account lunar wheel-soil interaction mechanics.

The Stability Analysis of Lunar Rover with Two Parallel Wheels and Changeable Driving Radius

Performance and Stability Analysis of Lunar Rover with Two Parallel Wheels

Prediction of Traction Performance of Lunar Rover's Driving Wheel on Slope Terrain

Research on Climbing Performance of Lunar Rover's Driving Wheel and Analysis of Affecting Factors

Kinematic modeling and analysis of variable diameter wheeled lunar rover

Characteristic and Performance Analysis of New Type Lunar Rover

Research on kinematics and dynamics of lunar rover with new configuration

A New Configuration of Mobile System of Lunar Rover and Its Drive Control Study

Analysis of Wheel-Soil Interaction of Rolling Wheels with Different Diameters on a Lunar Rover

The Wheel End Closure Optimization of Two-Wheeled Lunar Rover

Analysis of Over-obstacle Characteristic of a New Complex Structure Lunar Rover

Influence analysis of rim radius on motion performance of lunar rover wheel

Motion-control-based analytical model for wheel-soil interaction mechanics of lunar rover

Research on Locomotion Control of Lunar Rover with Six Cylinder-conical Wheels

Mechanical Analysis and Performance Optimization for the Lunar Rover’s Vane-Telescopic Walking Wheel

Co-simulation of Traction Harmonious Control on Wheeled Lunar Rover with Rocker Bogie

Kinematic Modeling and Analysis of Novel Eight-Wheel Lunar Rover

Mobility Performance Analysis of Lunar Rover with Center of Mass Varied Based on the Theory of Terramechanics

Design and Prototype Development of a Lunar Rover with Two-crank-slider Suspension

Dynamics Modeling and Simulation of a Lunar Rover with Six Cylindrical Wheels

Vibration Analysis of Eight-wheel Lunar Rover with the Torsion-bar and Rocker Structure