Abstract:Natural ventilation and the type of window used are closely related. Many works have already been done on identifying the window types that can enhance ventilation performance in residential buildings. However, window performance has been investigated either independently, without considering the interactive effects of other apertures (relative positions of windows and window orientations) or it has been examined based on very limited wind data sets. To fill this research gap, this study aims to evaluate the influence of window types on indoor ventilation performance of residential units in Hong Kong, taking into account the interactive effect and based on representative wind data sets. Air change per hour (ACH) was used to quantify natural ventilation. In this study, site measurement was conducted at a carefully selected residential unit to provide data for validation of the Computational Fluid Dynamics (CFD) settings. The validated settings were used for further CFD simulations. The Central Composite Design method and the Squeeze Theorem were used to determine the representative wind data sets. The Response Surface Regression method was used to develop a mathematical model for quantifying the interactive influence of different apertures on indoor ventilation and to enable quick estimation of ACH. The results lead to the conclusion that for all apertures, side hung (SH) window is the most effective design, followed in descending order by top hung (TH) window and sliding (SLD) window. The maximum achievable ACH for SH and TH windows were 124% and 97% higher than the SLD window. It was also found that if windows can be located only on the same side of a residential unit, SH windows and south facing TH windows should be preferred.

Study of windows on reducing contamination indoor

A Simulation Study of Ventilation and Indoor Gaseous Pollutant Transport under Different Window/door Opening Behaviors

Ventilation Characteristics and Performance Evaluation of Different Window-Opening Forms in a Typical Office Room

Study on Influence of Window Form on Indoor Natural Ventilation in Super High-Rise Buildings

Numerical simulation and site measurements of ventilation efficiency for different types of air-conditioned rooms through window-opening natural ventilation

Natural ventilation potential for residential buildings in a densely built-up and highly polluted environment. A case study

Windows design for maximum cross-ventilation in buildings

Window opening behavior of occupants in residential buildings in Beijing

Analysis of Natural Ventilation Performance Gap between Design Stage and Actual Operation of Office Buildings

Improving Building Facade Design Using Integrated Simulation of Daylighting, Thermal Performance and Natural Ventilation

Using response surface regression method to evaluate the influence of window types on ventilation performance of Hong Kong residential buildings

Experimental and CFD study of ventilation performance enhanced by roof window and mechanical ventilation system with different design strategies

Effect of Window Openable Area and Shading on Indoor Thermal Comfort and Energy Efficiency in Residential Buildings with Various Operating Modes

Linking Occupant Behavior and Window Design through Post-Occupancy Evaluation: Enhancing Natural Ventilation and Indoor Air Quality

Study on influencing factors for occupant window-opening behavior: Case study of an office building in Xi'an during the transition season

Realizing natural ventilation potential through window control: The impact of occupant behavior

Factors Affecting Occupants' Interactions With Windows In Residential Buildings In Beijing, China

Achieving natural ventilation potential in practice: Control schemes and levels of automation

Ventilation performance of a naturally ventilated double-skin façade in buildings

Study on Indoor Air Quality and Fresh Air Energy Consumption under Different Ventilation Modes in 24-Hour Occupied Bedrooms in Nanjing, Using Modelica-based Simulation.