Abstract:Background: Ethanol production through fermentation of gas mixtures containing CO, CO2 and H2 has just started operating at commercial scale. However, quantitative schemes for understanding and predicting productivities, yields, mass transfer rates, gas flow profiles and detailed energy requirements have been lacking in literature; such are invaluable tools for process improvements and better systems design. The present study describes the construction of a hybrid model for simulating ethanol production inside a 700 m3 bubble column bioreactor fed with gas of two possible compositions, i.e., pure CO and a 3:1 mixture of H2 and CO2. Results: Estimations made using the thermodynamics-based black-box model of microbial reactions on substrate threshold concentrations, biomass yields, as well as CO and H2 maximum specific uptake rates agreed reasonably well with data and observations reported in literature. According to the bioreactor simulation, there is a strong dependency of process performance on mass transfer rates. When mass transfer coefficients were estimated using a model developed from oxygen transfer to water, ethanol productivity reached 5.1 g L-1 h-1; when the H2/CO2 mixture is fed to the bioreactor, productivity of CO fermentation was 19% lower. Gas utilization reached 23 and 17% for H2/CO2 and CO fermentations, respectively. If mass transfer coefficients were 100% higher than those estimated, ethanol productivity and gas utilization may reach 9.4 g L-1 h-1 and 38% when feeding the H2/CO2 mixture at the same process conditions. The largest energetic requirements for a complete manufacturing plant were identified for gas compression and ethanol distillation, being higher for CO fermentation due to the production of CO2. Conclusions: The thermodynamics-based black-box model of microbial reactions may be used to quantitatively assess and consolidate the diversity of reported data on CO, CO2 and H2 threshold concentrations, biomass yields, maximum substrate uptake rates, and half-saturation constants for CO and H2 for syngas fermentations by acetogenic bacteria. The maximization of ethanol productivity in the bioreactor may come with a cost: low gas utilization. Exploiting the model flexibility, multi-objective optimizations of bioreactor performance might reveal how process conditions and configurations could be adjusted to guide further process development.

Kinetics for Hybrid Process of Continuous Fermentation and Ethanol Separation in a Silicone Rubber Membrane Bioreactor

Application of silicon rubber pervaporation membrane to butanol fermentation

Effects of components in lignocellulosic ethanol fermentation broth on ethanol transfer through polydimethylsiloxane-silicalite-1 pervaporation membrane

Influence of Operating Conditions on the Hybrid Separation Process Used for C4 Etherified Products

Modeling and Simulation of Biodiesel Production Using a Membrane Reactor Integrated with a Prereactor

Kinetic Modeling of Batch Fermentation for Gellan Gum Production

Pervaporation behavior and integrated process for concentrating lignocellulosic ethanol through polydimethylsiloxane (PDMS) membrane

A Hybrid Model Simulating Multi‐Stage Continuous Fermentation of Saccharomyces cerevisiae

Fabrication and Optimization of a Lipase Immobilized Enzymatic Membrane Bioreactor Based on Polysulfone Gradient-Pore Hollow Fiber Membrane

Kinetics of Mass Transfer through Membrane in the Bioreactor with Novel Silicone Rubber Membrane Modules for Industrial Wastewater Treatment

Combined Vapor Permeation and Continuous Solid-State Distillation for Energy-Efficient Bioethanol Production

Continuous Acetone-Butanol-Ethanol (ABE) fermentation with in situ solvent recovery by silicalite-1 filled PDMS/PAN composite membrane

PERFORMANCE ANALYSIS OF AN IMMOBILIZED YEAST PACKED-BED REACTOR FOR ETHANOL FERMENTATION

[Continuous Ethanol Fermentation Using Self-Flocculating Yeast Strain and Bioreactor System Composed of Multi-Stage Tanks in Series].

Reversible Adsorption and Detachment of Saccharomyces cerevisiae on Thermoresponsive Poly( N -isopropylacrylamide)-Grafted Fibers for Continuous Immobilized Fermentation

Continuous ethanol fermentation coupled with recycling of yeast flocs]

Kinetics-bolstered catalytic study of a high performance lipase-immobilized nanofiber membrane bioreactor

Ethanol fermentation using macroporous monolithic hydrogels as yeast cell scaffolds

Modeling ethanol production through gas fermentation: a biothermodynamics and mass transfer-based hybrid model for microbial growth in a large-scale bubble column bioreactor

Very High Gravity Ethanol Continuous Fermentation in Reaction System Composed by Packing Tubular Reactors