Novel mercury control technology for solid waste incineration: sodium tetrasulfide (STS) as mercury capturing agent.

Yangsheng Liu,Shaodong Xie,Yaqiong Li,Yushan Liu

DOI: https://doi.org/10.1021/es062455f

IF: 11.4

2007-01-01

Environmental Science & Technology

Abstract:Traditional pollution control technologies are able to capture oxidized forms of mercury to some extent; however, they show low efficiency for the control of elemental mercury emissions. This study developed a novel mercury removal technology: injection of sodium tetrasulfide (Na2S4) dissolved in the sodium hydroxide (NaOH) solution in the spray-dryer system. The effects of flue gas temperature and Na2S4 level in flue gas on the mercury removal efficiency were investigated. Na2S4 was decomposed into Na2S (S2-) and elemental S (S-0), which reacted with HgCl2 and elemental Hg (Hg-0), and HgS was then formed. Under the optimized operation parameters, this technology can simultaneously remove over 88% of HgCl2 and more than 90% of Hg-0 from a flue gas stream containing about 400 mu g m(-3) Hg-0 and 1200 mu g m(-3) HgCl2. The increased flue gas temperature (> 170 degrees C) and the decreased Na2S4-to-Hg mass ratio (S-Hg-R) (< 2.0) had negative effects on the reactions of gaseous mercury (HgCl2 + Hg-0) with ionic sulfur (S2-) and S-0. All the experiments were conducted in a full scale hospital-waste incinerator with a capability of 20 tons per day (TPD).