Abstract:Compared with the direct force measurement of cables, dynamic modal testing is more economic and applicable in engineering for monitoring the stiffness change of cable net structures caused by pretension deviation. Normally, it is sufficient to detect the variation of structural key stiffness by testing a few modes (target modes) that are, however, likely located in the region of dense modes. To effectively evaluate the stiffness of an existing cable net structure, the identification accuracy of these target modes should be improved when using conventional time-domain methods, e.g., the eigensystem realization algorithm (ERA). Structural free vibration can be induced by a step excitation that is generated by simultaneously releasing loads hung on the cable net. In this paper, the modal energy in the structural free vibration response is expounded to be determined by the work done by the step excitation loads in the direction of this mode shape. Therefore, the identification accuracy of a target mode can be improved by optimizing the layout and magnitude of the suspended loads to increase its energy proportion in the structural free vibration response and suppress those of its adjacent modes. For a certain set of degrees of freedom (DOFs) that loads are allowed to be suspended, a method is put forward to construct a step excitation load that can guarantee that the suppressed modes do not have an energy contribution to its induced free vibration. Referring to the effective independence (EI) method, an iterative algorithm is developed to select a given number of DOFs for the suspension of the step excitation loads that can ensure the target mode has a relatively large energy proportion. With the solution of generalized Rayleigh entropy, the magnitude of the loads suspended from the selected DOFs is further optimized to achieve the maximum energy proportion of the target mode. An illustrative saddle-shaped cable net roof is employed to validate the accuracy and validity of the proposed method by comparing the modal identification results under the optimized step excitation, conventional impact excitation and random excitation, respectively.

Study on Extraction Methods of Free-Free Structural Modal Parameters

Dynamic analysis of large-scale flexible systems for free--free space structures

Dynamic Sensitivity Analysis of Complex Structure Based on FEM

Kinematic Analysis of the Deployable Truss Structures for Space Applications

Quasi-static testing based structural modal parameter estimation

Extraction of free body frequency response functions from elastically constrained test

Analytical and Semi-Analytical Methods for the Evaluation of Dynamic Thermo-Elastic Behavior of Structures Resting on a Pasternak Foundation

On-line Time Domain Experiment Modal Analysis Based on Spline Function

Modal Parameter Identification of Structure under Base Excitation Using Vibration Test Data

Improved Automatic Operational Modal Analysis Method and Application to Large-Scale Bridges

A dynamic stiffness-based modal analysis method for a double-beam system with elastic supports

Analytical and Experimental Study of Free Vibration of Beams Carrying Multiple Masses and Springs

FORCE METHOD FOR FREE VIBRATION PROBLEMS OF FRAMED STRUCTURES

High-resolution frequency domain decomposition for modal analysis of bridges using train-induced free-vibrations

A Step Excitation Optimization Method for Intensive Modal Identification of Cable Net Structures

Modal Analysis of Thin Plate Structures with Damping Treatment Using Experiment and Finite Element Method

Finite Element Analysis Method for Modal Characteristic of Machine Column

Modal Identification of Multi-Degree-of-freedom Structures Based on Intrinsic Chirp Component Decomposition Method

Fully automated precise operational modal identification

Study on analytical global modes for a multi-panel structure connected with flexible hinges

Enhanced Subspace Iteration Technique for Probabilistic Modal Analysis of Statically Indeterminate Structures