Abstract:Leakage is a common defect of embankment dam slopes, and is usually accompanied by internal erosion. This study establishes a mathematical two-phase seepage coupling model that explicitly considers the effects of internal erosion. With the help of finite element software COMSOL Multiphysics ® , we use this model to study the characteristics of fluid seepage, the fraction of leakage volume that is made up of migrated fine particles (migrated fine particles volume fraction), porosity, permeability, and displacement in the leakage process of a three-dimensional embankment dam slope, as well as to study the influence of the water level and leakage outlet size on the aforementioned features. Our results show that water seepage velocity gradually increases with time, especially at the downstream leakage outlet. Therefore, the erosion and migration of fine particles occur primarily at the downstream leakage outlet, resulting in a significant increase in the migrated fine particles volume fraction, porosity, and permeability. In addition, the maximum migrated fine particles volume fraction, the maximum porosity, and the maximum permeability in the slope increase nonlinearly with time. Curves for maximum displacement with a strength reduction factor can be divided into three stages: the early stable stage, the midterm nonlinear growth stage (creeping state), and the later rapid growth stage (instability state). We also find that the rise of the water level promotes the erosion and migration of fine particles on the slope and that the maximum migrated fine particles volume fraction and the maximum porosity increase with the water level. The values of the strength reduction factor for the creeping state decrease as the water level rises. Furthermore, the larger the size of the downstream leakage outlet, the larger the maximum migrated fine particles volume fraction and maximum porosity. However, the relationship between maximum displacement and strength reduction factor is nearly unaffected by the size of the leakage outlet.

The Finite Element Method for the Free Surface of the Seepage in Homogeneous Earth Dam on Imperviousness Groundwork

Analysis of the Behaviors of Foundation Pit with Excavation Considering Variation of Seepage Free Surface

3D Finite Element Simulation Analysis of Dam Seepage Based on Heat Conduction Theory

Numerical Simulation of Two-Dimensional Dam Failure and Free-Side Deformation Flow Studies

Seepage analysis based on the unified unsaturated soil theory

Parallel finite element method for 2D free surface seepage

Free Surface Seepage Analysis Based on the Element-Free Method

Finite element calculation of micro porous seepage control wall of earth-rock dam on heterogeneous infinite deep pervious foundation

Numerical Simulation of Drainage Holes and Performance Evaluation of the Seepage Control of Gravity Dam: A Case Study of Heihe Reservoir in China

Application of NEM in seepage analysis with a free surface.

Numerical Analysis of Seepage for Concrete Face Rockfill Dam with Cracks Based on Block Equivalent Continuum Method

Numerical Simulation of a 3D Seepage Field of an Asphaltic and Concrete Core Rockfill Dam in an Arid Area

Calculation of seepage flow of earth rock dam for hanging micro porous cut-off wall

Analysis of Numerical Simulation of Seepage Failure and Seepage Feature of Seawall

Three Dimensional Analysis of Unconfined Seepage in Earth Dams by the Weak Form Quadrature Element Method

A Three-Dimensional Numerical Method for Siphon Drainage Process Simulation

Numerical Method for Saturated Unsteady Seepage

Application of element-free method to the seepage calculation with free surface

FEM Analysis of Saturated-unsaturated Seepage in Rock Mass and Its Application

A Numerical Analysis of the Leakage Characteristics of an Embankment Dam Slope With Internal Erosion

Numerical simulation of the critical hydraulic gradient of granular soils at seepage failure by discrete element method and computational fluid dynamics