Abstract:The diffusion of chemical grouts in porous media is important for soil reinforcement and stabilization. Slurry diffusion radius and pressure change are important parameters to measure the grouting effect. Using flower tube grouting to make Newtonian fluid slurries diffuse in a column–hemispherical shape is common in engineering, but its diffusion law is still unclear. In terms of the diffusion process, the grout adjacent to the grouting hole first spherically diffuses; with the continuous grouting, it will gradually intersect and overlap and then enter the second diffusion stage, at which the grout will continue to diffuse in a spheroidicity and the slurry in the middle does not spread out vertically anymore. If the stages during grouting are not considered, there will be some errors between the slurry diffusion and the actual situation. Meanwhile, in the traditional study of slurry diffusion law, the tortuous effect of the pore channels and viscosity time denaturation of grout is not considered, resulting in an obvious deviation between the calculated grouting diffusion diameter and the actual value. Therefore, based on the fractal theory, a two-stage column–hemispherical diffusion model of Newtonian fluid was derived considering the tortuosity of porous media and the time-dependent viscosity behavior of slurry. The influences of grouting flow rate, slurry viscosity and pore tortuosity on grouting pressure and diffusion radius under constant flow grouting mode were analyzed. The results show that the grouting flow rate had a positive effect on both of the diffusion radius and the grouting pressure, while the slurry viscosity and porosity tortuosity had a positive effect on the grouting pressure but a negative effect on the diffusion radius. Under the same condition, compared with the traditional column–hemispherical grouting diffusion model, the column–hemispherical grouting diffusion model with two-stage diffusion considering porosity zigzag had a larger diffusion radius and required a lower grouting pressure. The numerical simulation and model test also proved that the calculated diffusion radius and injection pressure from the theoretical model developed in this study were closer to the measured results, with an error of less than 10% in the diffusion radius and less than 20% in the grouting pressure. Therefore, the model may provide a certain reference for grouting design, construction and theoretical research.

Numerical Simulation for Diffusion and Pressure Distribution of Permeation Grouting

Numerical Investigation of Grout Diffusion Accounting for the Dynamic Pressure Boundary Condition and Spatiotemporal Variation in Slurry Viscosity

Numerical Simulation for Tortuosity of Porous Media

Experimental Investigation and Numerical Verification on Diffusion of Permeable Polymers in Sandy Soils with Considering Grouting Parameters

Mechanics of the Penetration and Filtration of Cement-Based Grout in Porous Media: New Insights from CFD–DEM Simulations

Numerical Simulation of Slurry Diffusion in Fractured Rocks Considering a Time-Varying Viscosity

Simulation of grout diffusion in fractured rock mass by equivalent seepage lattice elements

Infiltration Grouting Mechanism of Bingham Fluids in Porous Media with Different Particle Size Distributions

Numerical Simulation of Nanosilica Sol Grouting for Deep Tunnels Based on the Multifield Coupling Mechanism

Study on Permeation Grouting Rules for Loess and Method for Predicting Migration Radius

Finite Element Simulation on Dynamic Grouting in Saturated Sand

Grouting Diffusion of Chemical Fluid Flow in Soil with Fractal Characteristics

Column-Hemispherical Penetration Grouting Mechanism for Newtonian Fluid Considering the Tortuosity of Porous Media

Study on the mechanism and simulation of slurry diffusion in fractured rock mass based on detour effect

Theoretical and Experimental Validation for Calculating Permeation Diffusion Radius in Soil-Rock Mixtures

RESEARCH ON SIMULATION METHOD OF EXPANSIBLE POLYMER GROUTING MATERIAL FLOWING AND DIFFUSING IN TWO DIMENSIONAL FRACTURE

Backfill grouting diffusion law of shield tunnel considering porous media with nonuniform porosity

Two-stage column–hemispherical penetration diffusion model considering porosity tortuosity and time-dependent viscosity behavior

A semi‐elliptical surface compound diffusion model for synchronous grouting filling stage in specially shaped shield tunnelling

A Quasi-3D Numerical Model for Grout Injection in a Parallel Fracture Based on Finite Volume Method

Numerical and Experimental Studies of Diffusion Law of Grouting with Expansible Polymer