Abstract:Micro-electromechanical systems and nano-electromechanical systems have attracted a great deal of attention in recent years. The flow and heat transfer behaviors of micromachines for separation applications are usually different from that of macro counterparts. In this paper, heat and mass transfer characteristics of rarefied nitrogen gas flows in microchannels are investigated using direct simulation Monte Carlo with improved pressure boundary conditions. The influence of aspect ratio and wall temperature on mass flowrate and wall heat flux in microchannels are studied parametrically. In order to examine the aspect ratio effect on heat and mass transfer behaviors, the wall temperature is set constant at 350 K and the aspect ratio of the microchannel varies from 5 to 20. The results show that as the aspect ratio increases, the velocity of the flow decreases, so does the mass flowrate. In a small aspect ratio channel, the heat transfer occurs throughout the microchannel; as the aspect ratio of the microchannel increases, the region of thermal equilibrium extends. To investigate the effects of wall temperature (Tw) on the mass flowrate and wall heat flux in a microchannel, the temperature of the incoming gas flow (Tin) is set constant at 300 K and the wall temperature varies from 200 K to 800 K while the aspect ratio is remained unchanged. Results show that majority of the wall heat flux stays within the channel entrance region and drops to nearly zero at the halfway in the channel. When TwTin, the molecular number density of the flow drops rapidly near the inlet and the temperature of the gas flow increases along the channel. As Tw increases, the flow becomes more rarefied, the mass flowrate decreases, and the resistance at the entrance region increases. Furthermore, when Tw>Tin, a sudden jump of heat transfer flux and temperature are observed at the exit region of the channel.

Study on Two-Phase Flow Pressure Drop and Mass Transfer in Parallel Microchannels

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Measurement System for Characterization of Gas-Liquid Two-Phase Flow in Micro-Channel

PRESSURE FLUCTUATIONS OF LIQUID-LIQUID SLUG FLOW IN CROSS-JUNCTION SQUARE MICROCHANNELS

Effects of the Outlet Pressure on Two-Phase Slug Flow Distribution Uniformity in a Multi-Branch Microchannel

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

Flow Pattern Study and Pressure Drop Prediction of Two-Phase Boiling Process in Different Surface Wettability Microchannel

Computational Fluid Dynamics Modelling on Flow Characteristics of Two-Phase Flow in Micro-Channels

Numerical Simulation on Pressure Drops for Air-Water Two-Phase Flow in Micro-Channels

Characterization of Liquid-Liquid Two-Phase Flow Patterns and Mass Transfer Coefficients in Human-Shaped Microchannels

Effect of Liquid Properties on Frictional Pressure Drop in a Gas-Liquid Two-Phase Microchannel

Study of two-phase flow characteristics in the interrupted microchannels

Numerical investigation of mass transfer behavior of a gas–liquid two‐phase Taylor flow in a microchannel by a volume‐of‐fluid multiphase flow system

Hydrodynamics and Liquid–liquid Mass Transfer in Gas–liquid–liquid Three-Phase Flow in a Cross Microchannel

Mass transfer performance of gas-liquid segmented flow in microchannels

Simulation of gas flow and heat transfer in micro Poiseuille flow

Using Direct Simulation Monte Carlo with Improved Boundary Conditions for Heat and Mass Transfer in Microchannels

Determination of the Liquid/Liquid Mass Transfer Coefficient for Each Phase in Microchannels

Ethanol–CO2 Two-Phase Flow in Diverging and Converging Microchannels

EFFECTS OF INLET ARRANGEMENTS ON LIQUID-LIQUID FLOW PATTERNS IN CROSS-JUNCTION SQUARE MICROCHANNELS

Numerical simulation and experimental investigation of gas-liquid two-phase flow in a complex microchannel