Abstract:Water scarcity and water pollution have become increasingly severe, and therefore, the purification of water resources has recently garnered increasing attention. Given its position as a major water resource, the efficient purification of drinking water is of crucial importance. In this study, we adopted a phase transition method to prepare ZrO2/BCM (bamboo cellulose membranes), after which we developed IP-ZrO2/BC-NFM (bamboo cellulose nanofiltration membranes) through interfacial polymerization using piperazine (PIP) and tricarbonyl chloride (TMC). Subsequently, we integrated these two membranes to create a combined "ultrafiltration + nanofiltration" membrane process for the treatment of drinking water. The membrane combination process was conducted at 25 °C, with ultrafiltration at 0.1 MPa and nanofiltration at 0.5 MPa. This membrane combination, featuring "ultrafiltration + nanofiltration," had a significant impact on reducing turbidity, consistently maintaining the post-filtration turbidity of drinking water at or below 0.1 NTU. Furthermore, the removal rates for CODMN and ammonia nitrogen reached 75% and 88.6%, respectively, aligning with the standards for high-quality drinking water. In a continuous 3 h experiment, the nanofiltration unit exhibited consistent retention rates for Na2SO4 and bovine serum protein (BSA), with variations of less than 5%, indicating exceptional separation performance. After 9 h of operation, the water flux of the nanofiltration unit began to stabilize, with a decrease rate of approximately 25%, demonstrating that the "ultrafiltration + nanofiltration" membrane combination can maintain consistent performance during extended use. In conclusion, the "ultrafiltration + nanofiltration" membrane combination exhibited remarkable performance in the treatment of drinking water, offering a viable solution to address issues related to water scarcity and water pollution.

Design of concentrated technology of alkaline cellulose and its application

The most stirring technology in future: Cellulase enzyme and biomass utilization

STUDY ON FERMENTATION CONDITIONS FOR PRODUCING ALKALINE CELLULASE BY BACILLUS SP.AC-2 STRAIN

Production of Cellulase by Solid-State Fermentation

Study on Cleaning Technology and Membrane Separation of DL-α-alanine Synthesis

Fabrication of Cellulose Nanofiltration Membranes by Reusing a Binary Solvent of EMIMAc Ionic Liquid and DMSO

The Advances of Preparation Technologies of DL-α-Alanine and Its Application

High concentration ethanol production from corncob residues by fed-batch strategy.

Two-step continuous alkali pretreatment for fractionation of the carbohydrates from bamboo and cotton stalk

Progress in submerged fermentation process for cellulase production

Nanocellulose Based Filtration Membrane in Industrial Waste Water Treatment: A Review

A study on the enzymatic properties and reuse of cellulase immobilized with carbon nanotubes and sodium alginate

The Performance of Cellulose Composite Membranes and Their Application in Drinking Water Treatment

Application of Membrane Separation Technology in Fine Chemical Industry

Esterification of cellulose using carboxylic acid-based deep eutectic solvents to produce high-yield cellulose nanofibers

Revisiting Alkaline Pretreatment of Lignocellulose: Understanding the Structural Evolution of Three Components

[Process strategy for ethanol production from lignocellulose feedstock under extremely low water usage and high solids loading conditions]

Superfast, large-scale harvesting of cellulose molecules via ethanol pre-swelling engineering of natural fibers

Production of nanocellulose using acidic deep eutectic solvents based on choline chloride and carboxylic acids: A review

Studies on the Separation and Purification of the Caulis Sinomenii Extract Solution Using Microfiltration and Ultrafiltration

Sustainable preparation of cellulose nanofibrils via choline chloride-citric acid deep eutectic solvent pretreatment combined with high-pressure homogenization