Abstract:This paper presents the numerical investigation for a shell-and-tube latent heat thermal energy storage system (LHTES) employing numerical modeling and simulation with the FLUENT software. The LHTES consist of coilers where the heat transfer fluid (HTF) flows and a cuboids shell filled with phase change material. The unsteady N-S equation and energy equation using enthalpy measurement to deal with the latent heat of melting/solidification are solved. The effect of the tube diameter on the heat charging performance is examined, and the result shows that the functional relationship between the diameter of the tube and phase-change-rate is not monotonic. The optimal diameter of the tube at 20mm is used in all the subsequent computations. The influence of natural convection on charging and discharging processes is analyzed with positive tube pitch, and the result shows that natural convection plays a crucial role in the charging process and significantly accelerates the melting process; thermal conduction is dominant in the discharging process during the phase change stage which makes the discharging process much slower than the charging. The effects of the initial inlet temperature and velocity of HTF on the charging and discharging processes are studied in the case while PCM has a specific initial temperature. The result indicates that the inlet HTF velocity does not show a significant effect on the charging and discharging processes; the inlet HTF temperature shows a substantial effect on both processes. The temperature changing processes with time at different locations are also analyzed to dig more profound characteristics of the phase change process.

HEAT AND MASS TRANSFER IN A THERMAL MANAGEMENT CONTROLLER

Thermal Management Controller for Heat Source Temperature Control and Thermal Management

Study of heat and mass transfer in integrated thermal management controller (ITMC) employed in waste heat recovery application

Investigation of transient behavior of a novel thermal management controller

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Development of an experimental prototype of an integrated thermal management controller for internal-combustion-engine-based cogeneration systems

State-space model for transient behavior of transport membrane condenser

Performance Study of a Constant Temperature and Humidity Air-Conditioning System with Temperature and Humidity Independent Control Device

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

Design of Integrated Thermal Management Controller for CCHP System Based on Internal Combustion Engine Generator Set

Study on Dynamic Thermal Control Performance of Positive Temperature Coefficient (PTC) Material Based on a Novel Heat Transfer Model Considering Internal Heat Transfer

Study of Thermal Management in Water-Cooled PEMFC

Experimental and Simulative Investigation of A Micro-Cchp (micro Combined Cooling, Heating and Power) System with Thermal Management Controller

A SIMPLE MODEL FOR HEAT TRANSFER ANALYSIS OF SHELL-AND-TUBE WITH PHASE CHANGE MATERIAL AND ITS PERFORMANCE SIMULATION

A Transient Heat Current Model for Dynamic Performance Analysis and Optimal Control of Heat Transfer System

Experimental Study of Data-Driven Model Predictive Control on Transcritical CO2 Thermal System in Electric Vehicles

A novel transfer matrix-based method for steady-state modeling and analysis of thermal systems

Mathematical Modelling of Heat Transmission in the Temperature History Apparatus by Using Inverse Method to Evaluate the Latent Heat of High Temperature PCMs

Thermodynamic Analysis of Operating Strategies for Waste Heat Recovery of Combined Heating and Power Systems

Operation and Control Simulation of a Modular High Temperature Gas Cooled Reactor Nuclear Power Plant