Abstract:The degradation of typical dye wastewater is a focus of research in the printing and dyeing industry. In this study, a combined micro-electrolysis and microbial treatment method was established to treat refractory dye wastewater, and the pivotal factors in the microbial treatment were optimized. In the series and coupled modes, the removal rates of chroma reached 98.75% and 92.50%, and the removal rates of chemical oxygen demand (COD) reached 96.17% and 82.29%, respectively. The high-throughput sequencing results showed that the microbial communities in the microbial system varied at different treatment stages. From the culture stage to the domestication stage, the dominant phylum was Proteobacteria; however, the community abundance of microorganisms decreased. A combination of micro-electrolysis and biological methods can alter the characteristics of the microbial community, increase the number of dominant phyla, and increase the abundance of microorganisms. The degradation effect of the series mode and the overall strengthening effect of micro-electrolysis on the microorganisms were better than those of the coupled mode. In actual wastewater, the maximum removal rates of chroma, COD, total nitrogen (TN), ammonia nitrogen (NH<sub>3</sub>-N), and total phosphorus (TP) are 97.50%, 98.90%, 94.35%, 93.95%, and 91.17%, respectively. Three-dimensional fluorescence spectrum analysis showed that microbial processes could significantly degrade fluorescent components in wastewater, and methanogenic active enzymes in anaerobic processes could continue to react. The combined process can realize the efficient treatment of toxic dye wastewater by reducing the toxicity of wastewater and efficiently degrading organic matter, which has important guiding significance for the treatment of refractory dye wastewater.

Microwave irradiation-homogeneous Fenton oxidation coupling coagulation process in treatment of dyeing and printing wastewater

Effect of Nano-Fe<sub>2</sub>O<sub>3</sub>/Goldmine Complex on Dyeing Wastewater Treatment

The study on Chemi-thermomechanical pulp wastewater treatment using electro-fenton process

The Investigation of the Treatment of Dyeing Wastewater by Galvanic Corrosion-Reduction Degradation-Coagulation Absorption

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Study on the coagulation treatment of activated dye wastewater

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Advanced Treatment of Actual Textile Dye Wastewater by Fenton‐flocculation Process

Case Application of a Combined Treating Process on Azo Dye Wastewater

Microwave enhanced Fenton process for the removal of methylene blue from aqueous solution

Study on treatment of dyeing wastewater by combined process of biological micro-electrolysis

Treatment of Dyeing Wastewater by Photo-assisted Fenton System

High Concentration Dyeing Waste Water Pretreatment by Fe-C Micro-Electrolysis

Electron Beam Technology Coupled to Fenton Oxidation for Advanced Treatment of Dyeing Wastewater: from Laboratory to Full Application

Treatment of dyeing wastewater by hybrid processes of biological oxidation and ozonation

Experimental study on the treatment process of wastewater in a printing and dyeing industrial park

Research on dispose of wastewater from printing and dyeing by CWF combined with Iron-carbon Microelectrolysis

Hydrolytic acidification-contact oxidation-flocculation and sedimentation process for printing and dyeing wastewater treatment

Combination of catalytic ozonation by regenerated granular activated carbon (rGAC) and biological activated carbon in the advanced treatment of textile wastewater for reclamation.

Comparison of treatment performance and microbial community evolution of typical dye wastewater by different combined processes

Treating dyeing wastewater by combination of DC electrocoagulation and biochemical method