Abstract:Wide-viscosity-range impellers have extensive demands and applications in process industry. The gas–liquid dispersion and mass transfer characteristics of wide-viscosity-range impellers including Large-double-blade (LDB) impeller, Fullzone (FZ) impeller and Maxblend (MB) impeller in water solutions of xanthan gum were investigated experimentally and compared. The influences of gas flow rate, impeller speed and polymer concentration of liquid on the power consumption, overall gas holdup εg and mass transfer coefficient KLa were also analyzed. On this basis, the appropriate operating parameters and impeller type were determined. The results indicate that with rising flow rate, the higher εg and KLa can be achieved with a drop in power consumption, and a relatively high flow rate is recommended on the premise of guaranteeing the complete dispersal condition in aerated vessel. Higher impeller speed provides better gas–liquid dispersion and mass transfer performance, but results in more power consumption simultaneously. The appropriate impeller speed should be just enough to meet the requirements of εg and KLa. It also is found that the increasing concentration of water solution of xanthan gum adds to the complexity of gas dispersion and mass transfer in aerated vessel. Under the same specific power consumption PV, the εg and KLa are positive and negative correlation with the polymer concentration of liquid, respectively. Specially, when the concentration of water solution of xanthan gum is relatively low, the FZ impeller exhibits the best gas dispersion and mass transfer performance under the same specific power consumption. Nevertheless, the mass transfer performance of FZ impeller deteriorates significant when the concentration of water solution of xanthan gum increases to 1.00 wt%, and the MB impeller becomes the most appropriate impeller type in this condition.

Study on Oxygen Transfer Capability of Combined Impellers in Non-Newtonian Fluid

Investigation of Gas–liquid Dispersion and Mass Transfer Performance of Wide-Viscosity-range Impellers in Water Solutions of Xanthan Gum

Numerical Study on the Synergistic Mechanism of Coaxial Mixers in Dense Solid-Liquid Mixing Systems

Heat and Mass Transfer Processes for Multi-Paddle in Xanthan Gum Solution

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

Numerical investigation on the intensification of coaxial slurry mixing systems

Experimental Investigation on Drawdown of Floating Particles in Viscous Systems Driven by Coaxial Mixers

Experimental Study on Coaxial Mixer Based on Critical Uniform Dispersion of Floating Particles

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

The Influence of Impeller Combination on the Gas-Liquid Dispersion Performance of a Coaxial Mixer in Viscous Fluids

Computational Fluid Dynamics Simulation of Gas-Liquid Oxygen Transfer with Different Impeller Combinations

Numerical Simulation of Mixing Processes for Pseudoplastic Fluids in Industrial Scale Stirred Tank Agitated by Two Types of Impellers

Simulation of flow field of pseudoplastic fluids agitated by Maxblend impeller

Optimization of Maxblend Impeller Diameter in High Viscous Fluid by CFD

Micromixing Simulation of Novel Large-Double-Blade Impeller

Experimental Study of Influence of the Impeller Spacing on Flow Behaviour of Double‐Impeller Stirred Tank

Research on Heat Transfer Performance of Coaxial Mixer with Inner Combined Impeller

Mixing Technology of Gas-Liquid-Sinking Particles (i)——the Influencing Factors of Power Consumption

Experimental Study on Gas–liquid Dispersion and Mass Transfer in Shear-Thinning System with Coaxial Mixer

Heat Transfer Performance of Maxblend Impeller in Pseudoplastic Xanthan Gum System

The influence of feeding location on the micromixing performance of novel large-double-blade impeller