Abstract:This paper presents an experimental and numerical study on the compressive behaviors of a new carbon fiber-reinforced cement-based composite (CFRCC) that is composed of magnesium oxysulfate cement, carbon fiber and some chemical admixtures. Parametric studies on the effects of carbon fiber content and strain rate on the compressive behaviors of CFRCC, were conducted using a series of quasi-static and dynamic compressive tests. The research items includes the failure morphology, stress-strain curve, dynamic increase factor (DIF), etc. Besides, a three-dimensional (3D) mesoscale modelling approach was proposed to simulate and analyze the mechanical responses and the failure mechanisms of CFRCC subjected to dynamic compressive loading, where the random dispersion of chopped fibers were realistically considered. The results indicate that the cracking and failure modes of CFRCC were significantly affected by the bridging effect of carbon fibers randomly dispersed in cement matrix. With the increase of fiber content, the dynamic peak stress and peak strain of CFRCC at similar strain rates showed an increasing and decreasing trend, respectively. An evident strain-rate hardening effect could be found on the initial elastic modulus and the peak stress of CFRCC as well. While the relationship between the DIF of CFRCC and the logarithm of strain rate could be described using a quadratic function. Moreover, the mesoscale modelling approach has been validated by a good agreement between the numerical and tested results, demonstrating the feasibility of the developed mesoscale model in simulating and investigating the dynamic behaviors of CFRCC. All in all, the CFRCC has proven to be of great significance in resisting to impact loads, and more insights should be provided into its dynamic properties.

Experimental investigation on dynamic compressive behaviors of carbon cloth/carbon composites

Experimental Studies on Concrete Filled Steel Tubes under High Strain Rate Loading

Compressive Behavior of Engineered Cementitious Composites under High Strain-Rate Loading

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

Effect of Strain Rate on the Transverse Tension and Compression Behavior of a Unidirectional Non-Crimp Fabric Carbon Fiber/Snap-Cure Epoxy Composite

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

Dynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain Rates

Compressive Failure of Carbon/Epoxy Laminate Composites under High Impact Loading

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading

An experimental study on the tensile behavior of a unidirectional carbon fiber reinforced aluminum composite at different strain rates

Mechanical Behavior and Failure Mode of Woven Carbon/epoxy Laminate Composites under Dynamic Compressive Loading

Dynamic compressive impact behavior of CFRP composite under high strain rate loading

Strain Rate and Temperature Effect on Mechanical Properties and Failure of 3D Needle-Punched Carbon/Carbon Composites under Dynamic Loading

Experiment and mesoscopic modelling on the dynamic compressive behaviors of a new carbon fiber-reinforced cement-based composite

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

Size-dependent mechanical behaviors of 3D woven composite under high strain-rate compression loads

Experimental and numerical study on the loading rate dependent tensile behavior of carbon fiber/epoxy interface

Research on compression properties of unidirectional carbon fiber reinforced epoxy resin composite (UCFREP)

Numerical modeling of the mechanical response of basalt plain woven composites under high strain rate compression

Influence of strain rate and temperature on mechanical properties of carbon woven-ply PPS thermoplastic laminates under dynamic compression

Compression Mechanics for Carbon-Fiberreinforced Epoxy Resin Composites Under Inplane and Out-Of-Plane Quasi-Static and Dynamic Loadings