Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

Study of the nonlinear acoustic field produced by two uniform pistons

A Fast Calculation Method for the Scattered Sound Fields from Two Sound Beams Using the Gaussian-Beam Expansion Technique

Proceedings of Meetings on Acoustics

Sound Field Separating on Arbitrary Surfaces Enclosing a Sound Scatterer Based on Combined Integral Equations.

Inter-Particle Effects with a Large Population in Acoustofluidics

A Polynomial Chaos Expansion Method for the Uncertain Acoustic Field in Shallow Water

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Study of Sound Source Identification Based on Beamforming and Patch Near-Field Acoustic Holography

Study of the acoustic nonlinear field generated from a phased array using Gaussian superposition technique

A Modeling Approach to Predict Acoustic Nonlinear Field Generated by a Transmitter with an Aluminum Lens.

Theoretical Study of Sound Propagation in Lined Duct with Rigid Splices Using Wiener-Hopf Method

Numerical study of flow and noise predictions for tandem cylinders using incompressible improved delayed detached eddy simulation combined with acoustic perturbation equations

Theoretical and Experimental Study on Sound Source Identification Based on Combined Wave Superposition Method

The effect of diffraction on ultrasonic sound field of plane piston source

Scattering by a Rigid Sphere of Audio Sound Generated by a Parametric Array Loudspeaker.

Modeling Method on Acoustic Scattering from Penetrable Objects Using a Hybrid Kirchhoff/ray Approach

Study of the Influence Factors on the Accuracy of Sound Field Reconstruction Based on Wave Superposition Method

Computation of acoustic scattered fields and derived radiation force and torque for axisymmetric objects at arbitrary orientations

Numerical Study of Exterior Acoustic Problems Using a Novel Finite Element-Least Square Point Interpolation Method with Perfectly Matched Layer

Study of Nonlinear Acoustic Field of High Intensity Focused Ultrasound by the Fractional Wave

Sound Wave Scattering in a Flow Duct with Azimuthally Non-Uniform Liners