Abstract:Refractive index is one of the most important physical parameters of the materials. Owe to its great influence on the working characteristics of an optical systems, high accuracy measurement is required. Many methods have been proposed such as the v-prism method, the minimum deviation angle method, and the interferometric method. However, for the restriction of the principle, the shape of the sample is required to be a parallel plate or a prism with a specific shape. The sample with only spherical or aspheric surfaces cannot be tested. In this paper, an improved Brewster method is proposed to measure the refractive index of optical materials with arbitrary shapes. Brewster law can be expressed as that the reflectivity of the P-polarized light approaches zero when it is incident in the Brewster angle, which is the inverse trigonometric value of the refractive index. In the original method, a parallel laser beam with P polarization is incident on the sample, and reflected by it to a photodiode to get the intensity. The minimum intensity position corresponding to Brewster angle can be found by changing the incident angle. The reflecting surface of the sample need to be planar to provide smooth reflective area with a size greater than the beam diameter. In the improved method, a laser probe focusing on the sample and an array detector are used instead of the parallel beam and the photodiode. The minimum intensity position can be found with image processing technology. Since the laser beam is focused on the sample, only a tiny area with a size of 10 microns for reflection is needed. Thus, whatever the shape of the sample is, the method can be used. In order to demonstrate the feasibility, samples with different shapes such as a prism, a parallel plate and a lens was tested, and the accuracy of the results could all reach the order of magnitude of 10(-3).

Measurement of Refractive Index Profile of Gi-Pof by Using Least Square Method

Applicability of the Focusing Method to Measure the Refractive Index Profile of Polymer Optical Fibers

Measurement of the Group Refractive Index of Bulk Material Using White-Light Spectral Interferometry

Determination of the optical constants of polymer light-emitting diode films from single reflection measurements

Characterization of Refractive Index Distribution of Polymer Optical Fiber

The Research of Measuring Special Optical Fiber Refractive Index Profiles by Refracted Near-Field Method

Simultaneous Measurement of Refractive Index, Diameter and Colloid Concentration of a Droplet Using Rainbow Refractometry

Measurement of Refractive Index of Optical Materials Using Improved Brewster Method

Using A Laser Source to Measure the Refractive Index of Glass Beads and Debye Theory Analysis

Measurement of Refractive Index Homogeneity of Parallel Optical Component

Refractive Index Measurement of Glass with Arbitrary Shape Based on Brewster's Law and a Focusing Probe Beam.

Measurement Of Refractive Index Distribution Using Micro-Lens Array Based On Total Internal Reflection

Measurement of Refractive Index of Active Photopolymer Films

The Optical Fiber Refractive Index Profile Measurement Based on Phase-Correct Quantitative Phase Microscopy

Three Dimension Refractive Index Characterization for Photonic Waveguides

Application of Lorenz Function Model of Refractive Index Distribution in Gradient-Index Polymer Optical Fiber Rod

Construction of Refractive-Index Profile of Single Mode Fiber from the Near-Field Technology with an Inverse Algorithm Method

The Design of Analysis System of Refractive Index Profile of Optical Fiber

Reconstruction of Optical Parameter Fields in Graded Refractive Index Media Based on Laser Beam Deflection and Attenuation Measurement

Real Part of Refractive Index Measurement Approach for Absorbing Liquid.

Measurement Of Liquid Refractive Index Based On Optofluidic Single Mode Laser