Abstract:An incremental analog-to-digital converter (I-ADC) with chopper stabilization (CHS) and self-calibration techniques is presented to meet the requirements of high resolution,low power consumption and small area for measuring devices of ultra-low-frequency signals.The I-ADC has the function of reset operation to avoid pattern noise caused by ultra-low-frequency signals.A first-order architecture is adopted for the I-ADC to reduce power consumption and chip area,and to achieve 14-bit resolution by increasing certain conversion time.The chopper stabilization technique is employed to eliminate the influence of amplifier's low-frequency noise and offset on the I-ADC's precision,and power-on self-calibration is employed to eliminate the systematic offset of the I-ADC.The circuit of the I-ADC and the layout of the modulator are designed with the DongBu 0.5 μm BCD technology.Simulation results in an input range of -156.25～156.25 mV show that the maximum absolute conversion error of the I-ADC is 21 μV,the maximum errors of differential nonlinearity and integral nonlinearity are 0.12 and 0.21 bit,respectively,and the average current consumption of the modulator is only 20 μA.The modulator occupies a chip area of only 150 μm × 310 μm.The proposed I-ADC achieves 14 bit resolution,which is required by ultra-low-frequency signal measuring systems,such as lithiumion battery coulometer,and has significant advantages of low power consumption and small area.

High precision low-frequency AC signal source for ADC dynamic performance test system

An 18-Bit High Performance Audio Sigma-Delta D/A Converter

A 65-Nm Low-Power High-Linearity ΣΔ ADC for Audio Applications

A High-Precision All-Digital Automatic Gain Control Algorithm for Broadband Real-Time Spectrum Analyzer

A Novel Scheme of Signal Generating for High-Resolution AC Power Supplies

High-Precision and High-Resolution DC Standard Source Design Based on Multi-Channel PWM Method

Design of High Accuracy Ultra-Low-Frequency AC Voltage Meter

A Power Scalable PLL Frequency Synthesizer for High-Speed Δ—Σ ADC

Testing development for ADC on automatic test system

Design of Precision Adjustable DC Standard Source Based on PWM

Differential Sampling of AC Waveforms Based on a Commercial Digital-to-Analog Converter for Reference

Design and Implementation of DDS and DSM-based Multi-channel Signal Sources

High-Order Sigma-Delta Modulation Based Direct Digital Frequency Synthesizer

A High-Performance Wave-Generator Based on DAC

Design of C-band wide band small step and low phase noise frequency source based on DDS

A high-precision synchronous signal acquisition device.

Incremental Analog-to-Digital Converter with High Resolution and Low Power for Measurement of Ultra-Low-Frequency Signals

Design and Implementation of Precise Power Instrument Calibrator Based on DDS Technology

A 12-Bit 40 Ms/S Pipelined Adc With Over 80 Db Sfdr

ADC Dynamic Parameter Testing Scheme Under Relaxed Conditions

Design of testing system of amplitude-frequency characteristics