Abstract:As optical networks advance toward a dynamic multiwavelength all-optical structure, all optical wavelength conversion technologies become vital in the efficient utility of available fiber bandwidth. Experimental demonstrations of optical wavelength conversion usually involves a nonlinear element to transfer the information from the signal wavelength to that of a local laser source. In the case of Non-return-to-zero (NRZ) signals, the local laser source is usually a CW narrow linewidth semiconductor laser. For Return to Zero (RZ) signals, the local laser sources commonly employ a modelocked fiber laser or a modelocked semiconductor laser or a gain switched DFB to generate low jitter optical clock. Various materials and devices can be used as the nonlinear element for wavelength conversion, with the two most common being the optical fiber and semiconductor optical amplifier, though Lithium Niobate has also attracted attention in recent years as a switching element. The advantage of using optical fiber for wavelength conversion is that it is relatively cheap and has low levels of noise. However, the switching energy required to generate the nonlinearity in optical fiber is high compared to that of the SOA [1]. Wavelength conversion using SOA typically uses either four-wave mixing or crosses gain/phase modulation, with the latter method often used in conjunction with an interferometric topology [2]. The advantages of cross phase modulation of SOA in interferometers are the relatively low switching energy required, the fast switching speed, and the ability to integrate the whole structure on a single substrate.

Theoretical Study Of Soa-Based Wavelength Conversion With Nrz And Rz Format At 40gb/S

40 Gb/s all-optical NRZ to RZ format conversion using single SOA assisted by optical bandpass filter.

High Speed Wavelength Conversion and Format Conversion Based on Semiconductor Optical Amplifier and Optical Filter

40Gb/s Simultaneous Inverted and Non-Inverted Wavelength Conversion Based on Soa Using Transient Cross Phase Modulation

All-optical NRZ Wavelength Conversion Based on a Single Hybrid III-V/Si SOA and Optical Filtering.

Patterning Effect Mitigation Using Complementary Data for NRZ Wavelength Conversion with a SOA-MZI

Experimental Study of Wavelength Conversion at Various Modulation Formats Based on Four-Wave Mixing in a Semiconductor Optical Amplifier

Experimental Study of Soa-Based Nrz-To-Prz Conversion and Distortion Elimination of Amplified Nrz Signal Using Spectral Filtering

Multi-channel All-Optical Format Conversions from RZ Signals with Different Duty-Cycle to NRZ Signals

All-optical Format Conversion from NRZ to CSRZ and Between RZ and CSRZ Using SOA-based Fiber Loop Mirror

Proposal and Simulation of All-Optical Nrz-To-Rz Format Conversion Using Cascaded Sum- and Difference-Frequency Generation

Parallel Eight Channels All-Optical NRZ-to-RZ Format Conversions at 40 Gb/s Using a Single SOA

Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer

All-optical format conversion from CS-RZ to NRZ at 40Gbit/s.

All-optical 42.6 Gbit/s NRZ to RZ format conversion by cross-phase modulation in single SOA

Application of Semiconductor Optical Amplifiers in High-Speed All-Optical NRZ to RZ Format Conversion

Wavelength Conversion Using SOAs: Simulations and Experiment

Single-to-dual channel NRZ-to-RZ format conversion by four-wave mixing in single semiconductor optical amplifier

Simulation of 40 Gbit/s NRZ to RZ Format Conversion Based on Sum-Frequency Generation Using a PPLN Loop Mirror

Single Soa Based 16 Dwdm Channels All-Optical Nrz-To-Rz Format Conversions with Different Duty Cycles

20-Gb/s All-Optical Format Conversions from Rz Signals with Different Duty Cycles to Nrz Signals