Abstract:Municipal solid waste incineration (MSWI) fly ash has been classified as hazardous waste and needs treatment in an environmentally safe manner. Mechanochemical (MC) treatment is such a detoxification method, since it destroys dioxins and solidifies heavy metals. Milling, however, also introduces supplemental metals (Fe, Ni, Cr, Mn…), following wear of both steel balls and housing. Milling moreover reduces the particle size of fly ash and disperses catalytic metal, potentially rising the reactivity of fly ash to form and destroy ‘dioxins’, i.e. polychlorinated dibenzo- p -dioxins and dibenzofurans (PCDD + PCDF or PCDD/F). To test this issue, model fly ash (MFA) samples were composed by mixing of silica, sodium chloride, and activated carbon, and doped with CuCl 2 . Then, these samples were first finely milled without any additives for 0 h (original sample), 1 h and 8 h, and the effect of milling time (and hence particle size) was investigated on the formation of polycyclic aromatic hydrocarbons (PAHs), and of polychlorinated phenols (CP), benzenes (CBz), biphenyls (PCB) and dioxins (PCDD + PCDF) during de novo tests at 300 °C for 1 h, thus simulating the conditions prevailing in the post-combustion zone of an incinerator, where dioxins are formed and destroyed. These compounds are all characterized by their rate of generation (ng/g MFA) and their signature, i.e. internal distribution over congeners as a means of gathering mechanistic indications. PAH and CBz total yield did not decrease in MC treated MFA with milling time, while total pentachlorophenol (PeCP), PCB and PCDD/F yield decreased up to 86, 94 and 97%, respectively. International Toxic Equivalents (I-TEQ) concentration decreased more than 90%, while degree of chlorination varied inconsistently for PCB and PCDD/F, and average congener patterns of PCDD/F do not vary considerably with milling time for both gas and solid phase.

Experimental Study of PCDDs/Fs Formation from Fluorene Catalyzed by Model Fly Ash

PCDD/F Formation in Milled Fly Ash: Metal Chloride Catalysis

The Degradation of PCDD/Fs in Fly Ash Using Dielectric Barrier Discharge in a Lab-Scale Reactor

Formation of PCDD/F Catalysed by Chromium Chloride: Experiments and PCDD/F Signatures

Effects of Chlorine Speciation and Characteristic of Fly Ash on the De Novo Formation of Polychlorinated Dibenzo-P-Dioxins and Dibenzofurans

Formation of Polychlorinated Dibenzo-P-Dioxins and Dibenzofurans on Chlorobenzene and Fly Ash

Mechanism of Polychlorinated Diphenyl Ether Formation on A Simulated Fly Ash Surface

Effect of Zn, Cd compounds on formation of dioxins in model fly ash

Iron and copper catalysis of PCDD/F formation

Influences of Temperature and Atmosphere on PCDD/Fs Formation from PAHs Via De Novo Synthesis Reaction

Effects of Inorganic Chlorine Source on Dioxin Formation Using Fly Ash from a Fluidized Bed Incinerator.

Mechanism of PCDD/Fs formation from PAHs catalyzed by metal compounds

EXPERIMENTAL STUDY ON PCDD/Fs FORMATION ON WASTE INCINERATOR FLY ASH VIA DE NOVO SYNTHESIS-EFFECTS OF OXYGEN, CARBON AND CATALYST

Chlorobenzene formation from fly ash: Effect of moisture, chlorine gas, cupric chloride, urea, ammonia, and ammonium sulfate

Decomposition and reformation pathways of PCDD/Fs during thermal treatment of municipal solid waste incineration fly ash.

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Behavior of PCDD/Fs, PCBs, CBzs and PAHs During Thermal Treatment of Various Fly Ash from Steel Industry

Dioxins Degradation and Reformation During Mechanochemical Treatment.

Effect of water on catalyzed formation of polychlorinated dibenzo-p-dioxins and dibenzofurans from precursor

De novo formation of dioxins from milled model fly ash

Formation Pathways of PCDD/Fs During the Co-combustion of Municipal Solid Waste and Coal.