Abstract:The flow and heat transfer characteristics of nanofluid were attracting many researchers during the last two decades. Convection heat transfer in it is especially important for its potential applications. Therefore, it is crucial to study the nanoparticle behaviors near the near wall region and the interfacial property, which are dominant in nanofluid convection heat transfer. In this investigation, stable nanofluid was prepared with alumina nanoparticles (30 nm in diameter) and deionized water. The nanoparticle behaviors near the liquid wedge of bubbles were observed by high-speed CCD camera. The effects of nanoparticle behaviors in this region and the interfacial characteristics at the liquid-vapor interface on convection of nanofluid were experimentally investigated. Flocculent nanoparticle clustering was observed swirling near the liquid wedge, when the heat flux is relatively small. The microscopic morphology of the nanoparticle deposition layer at the heated surface was characterized by SEM images. It seems that the deposition layers could modify the morphology, but it also delays the detachment of small bubbles from the heated surface. While n-butanol was included as surfactant which will change the liquid/vapor interfacial property, it intensifies the nanoparticle deposition for low heat flux conditions. The analysis shows that the critical heat flux of nanofluid can be obviously improved when n-butanol was included in the nanofluid. It also shows that the inhibited bubble growth and enhanced nanoparticle clustering in the liquid wedge region are the main reason for the heat transfer deterioration when increasing the amount of surfactant in nanofluid. A comparative experiment indicates that the effect of surfactant on convection heat transfer is greater than the unstable deposition formed by nanoparticles. (C) 2014 Elsevier Inc. All rights reserved.

Preparation of Controllable Nanofluids and Research on Thermal Conductivity

Improved Dispersion Stability of Water-Based Tio2 Nanofluids Through Combined Effects of Nanoparticle Mixing and Dispersant Addition

Stability and thermal conductivities of hybrid sphere/tube TiO2 nanofluid

Experimental study on the thermal conductivity enhancement of water based nanofluids using different types of carbon nanotubes

Effects of Nanoparticles and Sample Containers on Crystallization Supercooling Degree of Nanofluids

Experimental Study on Preparation and Physical Properties of Nanofluids

Effects of Particle Surface Charge, Species, Concentration, and Dispersion Method on the Thermal Conductivity of Nanofluids

Stability of Nano-particle Suspensions

Analysis of the mechanism of enhanced heat transfer by nanofluids

Temperature Dependence of the Stability and Thermal Conductivity of an Oil-Based Nanofluid

Convective Heat Transfer and Resistance Characteristics of Nanofluids with Cylindrical Particles

Effect of temperature and nanoparticle size on the interfacial layer thickness of TiO 2 –water nanofluids using molecular dynamics

Experimental Study on the Convective Heat Transfer of Cuo-Water Nanofluid in A Turbulent Flow

Effects of Nanoparticle Behaviors and Interfacial Characteristics on Subcooled Nucleate Pool Boiling over Microwire

One-step synthesis of Cu/Therminol VP-1 nanofluids by phase transfer method and their thermal stability and thermophysical properties

Microfluidic controllable synthesis and size-dependent flow boiling heat transfer of silica nanofluids

Enhancement of Stability and Thermal Conductivity of Nanofluids Using Chinese Ink As a Surfactant

Dispersion stability and thermal conductivity of propylene glycol-based nanofluids

Effect of Preparation Temperature, Surfactant, and Nanoparticles Concentration on the Effective Thermophysical Properties of Multi-walled Carbon Nanotubes’ Nanofluids

Experimental Study On Convection Heat Transfer Of Nanocolloidal Dispersion In A Turbulent Flow

The function of nano layer in enhancing the thermal conductivity of TiO2/water nanofluids