Abstract:Non-ideal frequency response (FR) and voltage non-linearity of high-voltage (HV) instrument transformers directly impact the accuracy of HV measurements in the presence of harmonics. Characterization of voltage instrument transformer FR is generally performed at low voltage (LV) with sinusoidal test signals. Those results may not accurately represent the response of the instrument transformer when subjected to distorted waveforms in modern power systems. This article presents a calibration system for the evaluation of harmonic measurement accuracy of single-phase instrument transformers with rated voltages up to 132/ kV using multitone test signals containing a HV fundamental component and superimposed harmonics up to 10 kHz. Such signals would represent the realistic operating conditions of HV instrument transformers. The performance of the developed system was analyzed by obtaining the voltage ratio and phase displacement of the reference capacitive voltage divider (CVD) from 50 Hz to 10 kHz at 1 kV with an expanded uncertainty of 0.07% for the voltage ratio error and 0.09 crad for the phase error. The effect of voltage linearity at harmonic frequencies and the effect of the fundamental voltage on the errors of the measurements of harmonics were also evaluated. The results prove that the system is capable of calibrating HV instrument transformers under distorted waveform conditions with an uncertainty of 0.13% for ratio and 0.15 crad for phase error at harmonic frequencies from 100 Hz to 10 kHz, and 0.02% and 0.04 crad at the fundamental power frequency of 50 Hz.

A Study of Calibration System of DC Digital Nanovoltmeter

Development Of Vibration Environment For Calibration Ultra-Low-Frequency Seismometers

Development of Small-sized and Direct-current Calibration Wind Tunnel

Research of automatic control system for ultralow frequency vibration calibration

Development Of Automatic Vibration Calibration System

Study of No-liquid Calibration Technique for the Medium-and-large Diameter Electromagnetic Flowmeter

A Novel Ultra Low Noise CMOS Voltage Reference Circuit with Digital Calibration Scheme

Automatic Calibration System for Digital-Display Vibrometers Based on Machine Vision

Development of an Automatic Calibration Device for High-Accuracy Low Temperature Thermometers

Calibration of Field-Mill Instrument for Measuring DC Electric Field

Research on Automatic Verification of Standard Cell

Calibration System for High-Voltage Transformers With Multiharmonic Distorted Waveforms

Calibration of a Sensor for an Ion Electric Field under HVDC Transmission Lines

Wide-Range Digital-Analog Mixed Calibration Technology of a DC Instrument Transformer Test Set

A Calibration Method for Power Metering System with Electronic Instrument Transformers

Automated Setup to Accurately Calibrate Electrical DC Voltage Generators

The Design of Calibration System Based on Cable Accessories

Design of Calibration System for Multi-Channel Thermostatic Metal Bath

Design and testing of a high-precision generating voltmeter for metal-enclosed megavolt level DC voltage source

Calibration of insulation oil tester output voltage based on the electric field calculation for the electrode structure

Design on DC Digital Voltage Meter Based on C Language