Abstract:Purpose Once an uneven substrate is aligned, traditional control theories and methods can be used on it, so aligning is of great significance for the development of wire and arc additive manufacturing (WAAM). This paper aims to propose a shape-driven control method for aligning a substrate with slopes to expand the application of WAAM. Design/methodology/approach A substrate with slopes must be aligned by depositing weld beads with slopes. First, considering the large height differences of slopes, multi-layer deposition is needed, and the number of layer of weld beads must be ascertained. Second, the change in the deposition rate is controlled as a ramp function to generate weld beads with slopes. Third, the variation of the deposition rate must be fine-tuned to compensate for the deviation between the actual and theoretical layer heights at the deposition of each layer. Finally, the parameters of the ramp functions at the deposition of each layer are determined through an optimization method. Findings First, to model the response function of layer height to deposition rate, the experiments are conducted with the deposition rate jumping from 4to 8mm/s and from 8 to 4mm/s. When the deposition rate jumps from 4 to 8mm/s and from 8to 4mm/s, the difference in the height of each layer decreases as the number of layer increases. Second, the variation of the deposition rate can be fine-tuned based on the deviation between the measured and theoretical layer heights because the variation of the deposition rate is proportional to the layer height when the initial and end deposition rates are near 4or 8mm/s, respectively. Third, the experimental results demonstrate that the proposed method is effective for single-layer aligning and aligning a substrate with one or more slopes. Originality/value The proposed method can expand the application of WAAM to an uneven substrate with slopes and lays the foundation for aligning tasks focused on uneven substrates with more complex shapes.

Closed loop control of spray height in tubular preparation with reciprocating spray deposition process

Study on control system in industrial production of spray deposited aluminum alloy tubular

Conformally Anodizing Hierarchical Structure in a Deformed Tube Towards Energy-Saving Liquid Transportation

Study of Continuous Fluid Transfer and Fluid Level Control of Tundishes in Spray Formation

Research of Closed-Loop Control of Deposition Height in Laser Metal Deposition

Closed-loop Control of Variable Width Deposition in Laser Metal Deposition

Closed-Loop Control of Droplet Transfer in Electron-Beam Freeform Fabrication

Dual-droplet transition control for improving forming quality and composition homogenizing in dual-wire additive manufacturing of Ti2AlNb alloy

Adaptive Control of Deposited Height in GMAW-based Layer Additive Manufacturing

Image Processing-Based Online Analysis and Feedback Control System for Droplet Dripping Process.

Precise Control of Variable-Height Laser Metal Deposition Using a Height Memory Strategy

On-line measurement of deposit dimension in spray forming using image processing technology

Real-time Quality Control of Dripping Pill’s Weight Based on Laser Detection Technology

Research on phased variable scanning of nozzle drived by cam in well-distributed spray deposition billet

Development of Robotic Spraying System in Narrow Space

Image sensing and intelligent control of deposit dimensions in spray forming

Mechatronic Spatial Atomic Layer Deposition for Closed‐Loop and Customizable Process Control

Variable Velocity Coating Thickness Distribution Model for Super-Large Planar Robot Spraying

Suppression of the height deviation on metal bumps manufacturing by an ultrasonic vibration control

Shape-driven control of layer height in robotic wire and arc additive manufacturing

Mechanism design and process control of micro EDM for drilling spray holes of diesel injector nozzles