Abstract:Understanding the composite damage formation process and its impact on mechanical properties is a key step towards further improvement of material and higher use. For its accelerated application, furthermore, practice-related modeling strategies are to be established. In this collaborative study, the damage behavior of carbon fiber-reinforced composites under cyclic loading with load reversals is analyzed experimentally and numerically. The differences of crack density evolution during constant amplitude and tension-compression block-loading is characterized with the help of fatigue tests on cross-ply laminates. For clarifying the evolving stress-strain behavior of the matrix during static and fatigue long-term loading, creep, and fatigue experiments with subsequent fracture tests on neat resin samples are applied. The local stress redistribution in the composite material is later evaluated numerically using composite representative volume element (RVE) and matrix models under consideration of viscoelasticity. The experimental and numerical work reveals the strong influence of residual stresses and the range of cyclic tension stresses to the damage behavior. On the microscopic level, stress redistribution dependent on the mean stress takes place and a tendency of the matrix towards embrittlement was found. Therefore, it is mandatory to consider stress amplitude and means stress as inseparable load characteristic for fatigue assessment, which additionally is influenced by production-related and time-dependent residual stresses. The phenomenological findings are incorporated to a numerical simulation framework on the layer level to provide an improved engineering tool for designing composite structures.

Damage mechanics model dependent on stress triaxiality under low cycle fatigue for polymers

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

Craze Density Based Fatigue-Damage Analysis in Polyethylene Methacrylate

Cumulative damage model for steel weld under low-cycle fatigue

Theory of Visco-elasto-plastic Damage Mechanics

A Crystal Plasticity Model of Low Cycle Fatigue Damage Considering Dislocation Density, Stress Triaxiality and Lode Parameter

Modeling of Damage Evolution and Failure in Fiber-Reinforced Ductile Composites under Thermomechanical Fatigue Loading

A Plastic Fracture Mechanics Model for Characterization of Multiaxial Low-Cycle Fatigue

Meso-scale low-cycle fatigue damage of polycrystalline nickel-based alloy by crystal plasticity finite element method

Modeling fatigue failure in soft tissue using a visco-hyperelastic model with discontinuous damage

Fractional Cyclic Cohesive Zone Model for Time-Dependent Fatigue Behavior of Soft Adhesives under Mode-Ii Loading

Prediction of Short- to Long-Term Cyclic Deformation Behavior and Fatigue Life of Polymers

Modelling of Creep and Plasticity Deformation Considering Creep Damage and Kinematic Hardening

An Anisotropic Continuum Damage Model for High-Cycle Fatigue

A Fatigue Damage Model for FRP Composite Laminate Systems Based on Stiffness Reduction

A continuum damage mechanics model for fatigue degradation and failure of short fiber reinforced composites

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

A Rate‐type Nonlinear Viscoelastic–viscoplastic Cyclic Constitutive Model for Polymers: Theory and Application

Evaluation and Modeling of the Fatigue Damage Behavior of Polymer Composites at Reversed Cyclic Loading

Mechano-chemical molecular chains model of fatigue damage for fibre-reinforced polymeric matrix composites

The Fatigue Damage Mesomodel for Fiber-Reinforced Polymer Composite Lamina