Abstract:A resonance light-scattering method (RLS) for the determination of Rh(III) was initially developed, based on the reaction among Rh(III), WO4(2-) and ethylrhodamine B. The method possesses high sensitivity, but lacks selectivity. Therefore, a Rh(III) ion-imprinted polymer (IIP), prepared by precipitation polymerization using 2-(allylthio)nicotinic acid (ANA) as functional monomer, was used as sorbent to construct a ion-imprint based solid-phase extraction (IIP-SPE) method for separation of rhodium from complicated matrices prior to its determination by RLS. The experimental parameters affecting the extraction efficiency and selectivity of IIP-SPE were studied carefully. Under the optimal conditions, the IIP-SPE column with the enrichment factor (EF) of 10 could be used at least 20 times without decreasing its extraction recovery (above 90%) significantly. The calibration graph for the determination of rhodium by RLS coupled with IIP-SPE procedure was linear in the range of 0.06-1.5 ng mL(-1) with the detection limit of 0.024 ng mL(-1). There is no metal ions tested at the concentration below 10 ng mL(-1) interfered in the determination of 0.8 ng mL(-1) Rh(III). The proposed IIP-SPE-RLS method was successfully applied to the extraction and measurement of trace rhodium in catalyst, water and geochemical samples with the relative standard deviation (RSD) of less than 4.0% (n=4).

Solid Phase Extraction and Spectrophotometric Determination of Platinum in Catalysts with P-Rhodanineazo Benzoic Acid

Study on Solid Phase Extraction and Spectrophotometric Determination of Platinum with 2-(P-carboxylphenylazo) Benzothiazole

Determination of Palladium by Solid Phase Extraction and Spectrophotometry with P-Rhodanineazobenzoic Acid

Solid Phase Extraction and Spectrophotometric Determination of Platinum(Iv) with N-(3,5-Dihydroxyphenyl)-N '-(4-aminobenzenesulfonate)- Thiourea

Study of Solid Phase Extraction Prior to Spectrophotometric Determination of Platinum with N-(3,5-Dimethylphenyl)-N′-(4-Aminobenzenesulfonate)-Thiourea

Solid Phase Extraction and Spectrophotometric Determination of Palladium with 1-(2'-Benzothiazole)-3-(4'-carboxylbenzene)triazene

Solid phase extraction and spectrophotometric determination of palladium using 2-methyl-5-(4-carboxylphenylazo)-8-hydroxyquinoline as a chromogenic reagent

Study on Solid Phase Extraction and Spectrophotometric Determination of Palladium in Cyanide Residue with P-Sulfobenzylidene-rhodanine

A Study of a New Catalytic Spectrophotometric Method for the Determination of Rhodium

Solid phase extraction and spectrophotometric determination of palladium using hexyl benzimidazolyl sulfide as a chromogenic agent

Determination of Rhodium by Resonance Light-Scattering Technique Coupled with Solid Phase Extraction Using Rh(III) Ion-Imprinted Polymers As Sorbent

Solid-Phase Extraction-Photometric Determination of Trace Amounts of Palladium with 2-(2-Quinolylazo)-1,5-Diaminobenzene

Solid Phase Extraction and Spectrophotometric Determination of Palladium with 2-(2-quinolylazo)-5-diethylaminobenzoic Acid

Solid Phase Extraction Preconcentration of Platinum with Microspheres Containing Octyl Benzothiazolyl Sulfoxide

Study on Catalytic Spectrophotometric Method forthe Determination of Trace Rhodium by the Azocarmine B-KIO; System and its Application

Laser Thermal Lens Spectrometric Determination of Rhodium by the New Chromogenic Reagent 5-Bromo-(2-thiazolylazo)-5-diethylaminobenzoic Acid

Solid Phase Extraction and A Spectrophotometric Method for the Determination of Trace Amounts of Gold with 4-Rhodanineazo Benzoic Acid

Determination of Trace Platinum by Supramolecular Catalytic Kinetic Spectrofluorimetry of Β–cyclodextrin–platinum–kbro3–salicylaldehyde Furfuralhydrazone

Selective Solid-Phase Extraction and Separation of Trace Gold, Palladium and Platinum Using Activated Carbon Modified with Ethyl-3-(2-aminoethylamino)-2-chlorobut-2-enoate

Study on the Spectrophotometric Method for the Determination of Rhodium with Rhodium-Tungstate-Butyl rhodamine B System

Adsorption Properties of Pd(Ⅱ) after Solid Phase Extraction with Dibenzyl Sulfoxide Resin