Abstract:To tackle the hand–eye calibration challenge in 3D robot measurement systems, this study proposes a straightforward calibration method that employs a single sphere. This method demonstrates high calibration accuracy, minimal data quantity requirements, and remarkable noise tolerance compared to traditional methods. Three dimensional (3D) robot measurement systems, with binocular planar structured light cameras (3D cameras) installed at the terminal flange of robots, are widely used to measure complete workpieces by stitching point clouds obtained from various sampled poses. To ensure accurate stitching, hand–eye calibration is necessary. However, 3D cameras often demonstrate low precision in measuring jumping edges and vertices, resulting in challenges when selecting appropriate calibrators and calibration methods for hand–eye calibration. We propose a simple and high‐precision hand–eye calibration method for 3D robot measurement systems. Initially, a single sphere is utilized as the calibrator, and its poses are observed using specific robotic motions. Subsequently, the hand–eye calibration problem is formulated as a well‐known equation, AX=XB , relying solely on the high‐precision relative pose of the robot. Finally, a novel simultaneous solution for AX=XB and the corresponding closed‐form initial solution are introduced. Simulations and experiments confirm that the proposed method exhibits high noise resistance and achieves high‐precision calibration, even with a limited calibration data quantity. Compared with traditional methods, the fitting error of the proposed method can be reduced from over 0.9 mm to less than 0.6 mm.

Hand-eye Calibration for the Robot by Measuring a Fixed Point from Different Poses

Calibration of a Single-Point Laser Range Finder and a Camera

AN AUTONOMOUS HAND-EYE CALIBRATION METHOD

Robot Base Frame Calibration with a 2D Vision System for Mobile Robotic Drilling

Calibration of a portable laser 3-D scanner used by a robot and its use in measurement

Calibration For Kinematic Parameters Of Industrial Robot By A Laser Displacement Sensor

A novel hand-eye calibration method for industrial robot and line laser vision sensor

A measurement method for calibrating kinematic parameters of industrial robots with point constraint by a laser displacement sensor

Position-Constrained Calibration Compensation for Hand–Eye Calibration in Industrial Robots

Calibration of Laser Displacement Sensor Used by Industrial Robots

Simple and High‐Precision Hand–Eye Calibration for 3D Robot Measurement Systems

A New Pose Measuring and Kinematics Calibrating Method for Manipulators

A Simultaneous Hand-Eye Calibration Method for Hybrid Eye-in-Hand/Eye-to-Hand System

A Novel Point Set Registration-Based Hand–Eye Calibration Method for Robot-Assisted Surgery

A Simple and Generic Method for Real-time Accurate Hand-eye Calibration Using a 3D Vision Sensor

Simultaneous Hand-Eye and Intrinsic Calibration of a Laser Profilometer Mounted on a Robot Arm

A Two-Step Self-Calibration Method With Portable Measurement Devices For Industrial Robots Based On Poe Formula

Calibration of a multiple axes 3-D laser scanning system consisting of robot, portable laser scanner and turntable

[A Plane-Based Hand-Eye Calibration Method for Surgical Robots].

On Flange-based 3D Hand-Eye Calibration for Soft Robotic Tactile Welding

A local POE-based self-calibration method using position and distance constraints for collaborative robots