Abstract:Abstract For the ASO-S/HXI payload, the accuracy of the flare reconstruction is reliant on important factors such as the alignment of the dual grating and the precise measurement of observation orientation. To guarantee optimal functionality of the instrument throughout its life cycle, the SAS is imperative to ensure that measurements are accurate and reliable. This is achieved by capturing the target motion and utilizing a physical model-based inversion algorithm. However, the SAS optical system's inversion model is a typical ill-posed inverse problem due to its optical parameters, which results in small target sampling errors triggering unacceptable shifts in the solution. To enhance inversion accuracy and make it more robust against observation errors, we suggest dividing the inversion operation into two stages based on the SAS spot motion model. Firstly, the as-rigid-as-possible (ARAP) transformation algorithm calculates the relative rotations and an intermediate variable between the substrates. Secondly, we solve an inversion linear equation for the relative translation of the substrates, the offset of the optical axes, and the observation orientation. To address the ill-posed challenge, the Tikhonov method grounded on the discrepancy criterion and the maximum a posteriori (MAP) method founded on the Bayesian framework are utilized. The simulation results exhibit that the ARAP method achieves a solution with a rotational error of roughly ±3.5 arcsec (1/2-quantile); both regularization techniques are successful in enhancing the stability of the solution, the variance of error in the MAP method is even smaller - it achieves a translational error of approximately ±18μm (1/2-quantile) in comparison to the Tikhonov method's error of around ±24μm (1/2-quantile). Furthermore, the SAS practical application data indicates the method's usability in this study. Lastly, this paper discusses the intrinsic interconnections between the regularization methods.

Optimization of the Modified Sagnac Imaging Interferometer for Full Compensation

Design of the Interferometric Spectral Discrimination Filters for a Three-Wavelength High-Spectral-resolution Lidar.

Spherical Aberration Compensation Method for Long Focal-Length Measurement Based on Talbot Interferometry

Optical Throughput of Modified Sagnac Imaging Interferometer

A Novel Sagnac Imaging Polarization Spectrometer

Inverse Calculation and Regularization Process for the Solar Aspect System (SAS) of HXI Payload on ASO-S Spacecraft

Compensation Optimization for a Static Mars Wind Imaging Michelson Interferometer

Optical Path Difference and Lateral Displacement of Sagnac Lateral Shearing Interferometer

Recent Developments of Interferometric Wavefront Sensing

Exact Calculation of the Optical Path Difference and Lateral Displacement of Modified Large Optical Path Difference Sagnac Interferometer in Full View Field Used in Upper Atmospheric Wind Field Measurement

Optimisation-based alignment of wide-band integrated superconducting spectrometers for submillimeter astronomy

Optimisation-based alignment of wideband integrated superconducting spectrometers for sub-mm astronomy

Sub-aperture stitching interferometry using stereovision positioning technique.

Analysis of the lateral displacement and optical path difference in wide-field-of-view polarization interference imaging spectrometer

Analysis of the Sagnac Interference Imaging Spectrometer with a Variable Optical Path Difference

A Wide Field Wind Image Interferometer with Chromatic and Thermal Compensation

Interference Visibility of the Wide-Field-of-view Polarization Interference Imaging Spectrometer (WPIIS)

Field-compensated Birefringent Fourier Transform Spectrometer

Research of Secondary Fringes in Field-Widened Achromatic, Temperature-Compensated Wind, Imaging Interferometer (Fatwindii)

Design and Analysis of A Polarization Interference Imaging Spectrometer with Expanded Field of View

Optical Throughput of the Sagnac Interferometer with A Modified Large Optical Path Difference