Abstract:The fluidic pintle nozzle, a new method to control the thrust of a solid rocket motor, has been proposed in recent years by combining the pintle with the aerodynamic throat (fluidic throat). The study of static characteristics has proved that it has a remarkable effect on thrust control. To study the transient characteristics of the fluidic pintle nozzle, 2D transient simulations of a fluidic pintle nozzle propulsion system were conducted, employing dynamic meshing techniques. The Reynolds-averaged Navier–Stokes equations were meticulously solved, implementing a k–ω SST turbulence model. The thrust control principle of the fluid pintle nozzle was studied, and the wave structure was summarized. The transient characteristics of the secondary flow opening, secondary flow closing, pintle moving forward (pressure rise), and pintle moving backward (pressure drop) were obtained, and the effects of the injection angle and injection port position were studied. The response process after injection can be roughly divided into three stages: pressure propagation, pressure oscillation, and equilibrium stability, with time distributions of 0.4%, 5.39%, and 94.21%, respectively. In the process of the pintle moving forward, the rate of combustion chamber pressure increases and thrust decreases gradually because of the arc wall of the nozzle throat upstream, and the process of throats moving backward is just the opposite. Compared with the condition with a maximum throat opening and no secondary flow, the thrust of the condition with a minimum throat opening and a 0.3-flow-ratio secondary flow is increased by 80.95%. Under conditions of constrained flow ratio, the injection angle of the secondary flow ostensibly exerts negligible influence on the dynamic modulation of thrust. Nevertheless, it remains evident that a reduction in throat opening accentuates the impact of reverse injection. Furthermore, the proximity of the injection port to the head of the pintle is directly proportional to the efficacy of thrust control.

Study on Performance of Pintle Controlled Thrust Solid Rocket Motor

Simulation of thrust control by fluidic injection and pintle in a solid rocket motor

Transient flow characteristics and performance of a solid rocket motor with a pintle valve

Transient Characteristics of Fluidic Pintle Nozzle in a Solid Rocket Motor

Comparison Of Solid Rocket Motor Thrust Modulation Technique

Modeling and dynamic characteristics analysis on solid attitude control motor using pintle thrusters

Solid rocket motor design employing an efficient performance matching approach

Performance Comparison of Control Strategies for a Variable-Thrust Solid-Propellant Rocket Motor

Influence of Structural Parameters on the Performance of Vortex Valve Variable-Thrust Solid Rocket Motor

Thrust Control Method and Technology of Variable-Thrust Liquid Engine for Reusable Launch Rocket

Numerical investigation on regression rate and thrust regulation behaviors of a combined solid rocket motor with aluminum-based fuel

Numerical Simulation of Inner Flow Field of a Pintle Injector Variable Thrust Rocket Engine

Thrust control system design of ducted rockets

Throttling simulation and control of liquid oxygen/liquid methane rocket engine pressurized by the electric pump

Experimental investigation of a flow-oriented throttleable injector designed for throttleable hybrid rocket motor

Variations and Control of Thrust and Mixture Ratio in Hybrid Rocket Motors

Controlled Parameter Selection in Solid Ducted Ramjet for Thrust Control

Design and numerical analysis on a solid micro-thruster

Thrust Ripple Optimization and Experiment for a Permanent Magnet Linear Synchronous Motor

Numerical Research for Adjusting Thrust of Solid Rocket Motor by Using the Embedded-wire Grain

Thrust Control of Lab-Scale Hybrid Rocket Motor with Wax-Aluminum Fuel and Air as Oxidizer