Abstract:The demand for three-dimensional 3D measurement technology has been increasing, but in many of the traditional 3D measurement methods, such as the method using phase shift pattern projection, it is difficult to measure the shape of specular-reflective and transparent objects, because the power of the light reflected from specular reflective objects is too high and that from transparent objects is too low. Consequently, digital cameras cannot acquire accurate information from reflected light. Digital holography has been used as a means of resolving this problem. In traditional digital holography, the interference fringes of the light from the object being measured and the reference light can be captured by a digital camera. Using the Fresnel diffraction principle, the phase information in the light from the object being measured can be acquired and the shape of the object can be calculated by interferometry. Digital holography can be used to measure reflective and transparent objects. However, by the principle of Fresnel diffraction, dc and conjugate components exist in the calculated phase information a noises, so that the accuracy of measurements is reduced. Phase shift digital holography can remove noise by using special devices to change the phase of the reference light, but the devices are costly and the systems are complex, so that practical application of phase shift digital holography has been difficult. In this paper, we propose a new method of phase shift digital holography using the light detection principle. We also propose a digital holography reconstruction method using the convolution approach rather than the traditional Fresnel approach. The proposed method results in a compact phase shift holography system with lower cost and greater accuracy than the 3D measurement method. Therefore, the practical applications of digital holography can be realized less expensively and more accurately.

Measurement of Out-of-plane Displacement with a Digital Real-Time Holography

An Axial Displacement Measurement Relying on the Double-Helix Light Beam

Phase-Contrast Imaging Technology with Digital Holographic Microscope Based System Calibration

Hybrid Digital Holographic Imaging System for Three-Dimensional Dense Particle Field Measurement

Axial Displacement Measurement with High Resolution of Particle Movement Based on Compound Digital Holographic Microscopy

Phase Compensation in Digital Holography Microscopy

Study on Quantitative Phase Imaging by Dual-Wavelength Digital Holography Microscopy

Vibration measurement of a miniature component by high-speed image-plane digital holographic microscopy.

Three-Dimensional Displacement Measurement Based on the Combination of Digital Holography and Digital Image Correlation

Measurement of in-plane and out-of-plane displacements and strains using digital holographic moiré

Development of 3d Measurement System Using Phase Shift Digital Holography

Common-path Digital Holographic Microscopy Based on a Beam Displacer Unit

A Commercialized Digital Holographic Microscope with Complete Software Supporting

Real-Time One-Point Out-Of-Plane Displacement Measurement System Using Electronic Speckle Pattern Interferometry

Quantitative and Dynamic Phase Imaging of Biological Cells by the Use of the Digital Holographic Microscopy Based on a Beam Displacer Unit

Common-Path Digital Holographic Microscopy and Its Applications

Quasicommon-path Digital Holographic Microscopy with Phase Aberration Compensation Based on a Long-Working Distance Objective

Measurement and Reconstruction of Three-Dimensional Configurations of Specimen with Tiny Scattering Based on Digital Holographic Tomography.

3D Shape and Displacement Measurement of Diffuse Objects by DIC-Assisted Digital Holography

Dual-wavelength slightly off-axis digital holographic microscopy.

Compact Digital Holoscope with Dual Wavelength