Design Of Remote Real-Time Temperature Monitoring System

Shi Li,Yu Youling,Xu Weisheng

DOI: https://doi.org/10.1109/ICEMI.2007.4350604

2007-01-01

Abstract:This paper introduce a remote wireless temperature monitoring system which can be real-time and multi-regional access to information without geographical restriction by short message service (SMS).

What problem does this paper attempt to address?

[Development of a Wireless Multiple Physiological Parameters Monitoring System].

Jian Xu,Jian-gang Lu

DOI: https://doi.org/10.3969/j.issn.1671-7104.2005.06.005

2005-01-01

Abstract:This paper presents a scheme of a wireless multiple physiological parameters monitoring system, and gives a detail description on the hardware and software realization. This system utilizes wireless communication technology, embedded micro internet working technology and medical service technology in the remote monitoring system.
Water Quality Early-warning System Based on GSM Short Message Service

Shuyin Zheng,Pingjie Huang,Dibo Hou,Midi Gao,Jiachen Li,Xuliang Shan,Guangxin Zhang

DOI: https://doi.org/10.1109/icetce.2012.863

2012-01-01

Abstract:Short message service(SMS), based on GSM, has been applied in various fields. In the mean time, the application of publishing of remote monitoring and early-warning information, which uses the pattern of short message, also grows up over time. After analyzing the features of existing systems and wireless communication service theory, this paper designs and develops a SMS platform, aiming at certain water-information monitoring and early-warning system. In this way, water early-warning information can be published in-time and reliably, thus corresponding feasible preventive measures for upcoming water quality problems could be taken and the influence of water quality events on normal production and life could be minimized, and the economic and social sustainable development could be guaranteed.
Design of Greenhouse Remote Monitoring System Base on GPRS

JIANG Hui,HU Feng,CHEN Ming,JIN Yu,LIU Dan-jie,DONG Ke-dong,YAO Qing

DOI: https://doi.org/10.3969/j.issn.1673-3851.2011.06.017

2011-01-01

Abstract:A remote monitoring system of greenhouse based on GPRS is designed.The low computer of this system is composed of the temperature sensor,humidity sensor,GPRS module and singlechip STC89C52 and so on.The upper computer is a PC connected to internet web.Firstly,the sensors gather temperature and humidity data.After being a series of disposed,the data is sent to the GPRS network via SIM300 module.And then,the soft of the upper computer detect the corresponding network port constantly.And the information of the port is received,processed and analysised.When the temperture or the humidity is abnormal,the alarming is given so as to achieve the purpose of unmanned monitoring in greenhouse.The result shows that this system is steady and it complies with the design requirements.
Remote Data Acquisition System Based on SMS

程龙兴,胡协和,冯冬芹,黄文君

DOI: https://doi.org/10.3969/j.issn.1002-1841.2005.01.007

2005-01-01

Abstract:Remote data acquisition has been widely applied in many industry fields such as metallurgy and chemical, but many remote data acquisition system which are often been used have much shortcoming. Development of GSM communication technology makes Short Message begin to be applied on industrial control field. Short Message System has the merits of wide coverage, low cost, easy development and high reliability, so it is fit for remote data acquisition. Introduced the development of a remote data acquisition system based on SMS,including its structure and software designing. Now it has been applied in remote data acquisition of seweragegetting better effect.
The design of a remote temperature monitoring-control system based on Web

WEN Xiao-ling,ZHONG Xiao-xia

DOI: https://doi.org/10.3969/j.issn.1000-0682.2008.03.013

2008-01-01

Abstract:This paper presents the design and implementation of a remote temperature monitoring-control system.The real-time measurement and control of the temperature are implemented by a local monitor computer and a single-chip microprocessor.The local monitor computer is connected to the client of Internet through the Web server.In this way,the proposed system can be used for the remote measurement and control of the temperature at a low cost.
The Design and Realization of Remote Monitor and Control System Based on SMS

朱万贵,郑国君,顾新建

DOI: https://doi.org/10.3969/j.issn.1009-0134.2003.12.009

2003-01-01

Abstract:Remote monitor and control technology is a pop topic in modern manufacturing; Shortmessage is one of the up to date technology and it owns many merits. Such as: easydevelopment、low cost、free service、high reliability and so on. In this paper we discussthe theory and operation of SMS in GSM Net and do some research on the design andrealization of Remote Monitor and Control System base on SMS in manufacturing.
Design of the Integrated Remote Monitoring System Based on Internet/GPRS

孙凯

DOI: https://doi.org/10.1109/icacte.2010.5579229

2010-01-01

Abstract:By analyzing the problem of the current monitoring system, the design solutions of the integrated remote monitoring system based on Internet / GPRS is proposed. The system is integrated multiple monitoring ways and it can monitor multiple locations simultaneously. By phone software, short message and Web browser, users can view video, temperature and humidity, smoke, infrared intrusion and other information of monitoring spots,and also can remote control through these three ways.
A Communication Method for the Remote Real-Time Multiple Biological Parameters Monitoring and Analysing System

Chen Wei,Zhang Yue

DOI: https://doi.org/10.1109/IS3C.2014.233

2014-01-01

Abstract:This paper presents a communication method for the remote real-time multiple biological parameters monitoring and analysing system. It is researched and designed in order to meet the transmission requirement of multiple biological parameters in the mobile communication network. Experiments show that it satisfies the communication demand between the monitoring device and the monitoring server and effectively increases the instantaneity and integrity. The monitoring and diagnosis ability of medical institutions can be improved dramatically by using the rapid development of computer and network technology.
Design of Wireless Environment Monitoring Terminal Based on CDMA/GPRS/RADIO

Dong Li-da

2006-01-01

Abstract:Based on ATmega128 SCM and embedded real-time operating system(RTOS)-μC/OS-Ⅱ,a wireless surveillance terminal is developed.The designed terminal can remotely monitor or control equipment signals through all kinds of wireless communication channels such as CDMA,GPRS,RADIO,which is superior to many traditional environment monitor systems.In other words,the terminal can automatically monitor many environment parameters remotely,without the consideration of the restriction of distance between terminals and central servers.The application results show that the designed wireless surveillance terminal is stable and reliable.
Design and Implementation of Mobile Remote Medical Surveillance System

周笑,李明,卜佳俊,杨智

DOI: https://doi.org/10.3969/j.issn.1000-3428.2010.10.087

2010-01-01

Abstract:This paper proposes a remote medical surveillance system based on mobile equipment which uses General Packet Radio Service(GPRS) communication and encryption technology to combine with the development of General Packet Radio Service(GPRS).It considers over service client,network transmission,mobile terminal and data collection terminal synthetically to achieve real-time monitor,diagnose patient’s heartthrob and blood pressure and receive feedback information from service client.The principles and the overall program of the system is introduced.Data collection terminal design,control center software design and diagnostic algorithms are expatiated.
The Design of Remote Medical Monitoring System Based on Sensors and GPRS

Xiaohong Wang,Li Liu

DOI: https://doi.org/10.1109/IFITA.2009.319

2009-01-01

Abstract:As a new medical method, the remote medical monitoring system is being paid more and more attention to. This article proposes a kind of remote medical monitoring system which is based on the sensor and GPRS (general packet radio service, GPRS). The article first analyzes the necessity of the remote medical monitoring system, and then explains the advantages of the GPRS which is used in the remote medical monitoring system, and finally gives the architecture design of the remote medical monitoring system. The remote medical monitoring system is composed of two parts, which are mobile remote medical monitoring unit and the monitoring center. The user can carry the mobile unit along, while this mobile unit can real-timely monitor the physiological data from the user with sensors. When something abnormal happens, the intelligent control system automatically connects to the monitoring center. The monitoring center is composed of the monitoring station and the information management system. The information management system is connected with the monitoring center by a local area network, and its main function is to manage information such as the electronic map, the user's medical record and so on.
Design and Implementation of Portable ECG and Body Temperature Monitor

Xudong Sun,Yue Zhang

DOI: https://doi.org/10.1109/is3c.2014.239

2014-01-01

Abstract:Electrocardiogram (ECG) and human body temperature are the important physiological parameters in human body. Through monitoring and analyzing ECG and human body temperature, we can know the health condition of human body and achieve the purpose of prevention and diagnosis for diseases accordingly. In this paper, a solution of portable system for monitoring ECG and human body temperature is proposed. As the front-end subsystem of the remote medical monitoring platform, the system can acquire the data of ECG in human body and measure the human body temperature, while sending the measured data to the users' mobile phones by the Bluetooth in real time. Then, the wireless communication modes such as 3G, Wi-Fi, etc. on the mobile phone are utilized to send the data to the remote server which performs real-time analysis and diagnosis. What's more, a built-in memory card is provided for data backup in the system. The system realizes the mobile monitoring for the ECG and human body temperature, not only bringing convenience to users, but also saving the medical resources.
Design and Implementation of Wireless Monitoring System Based on Windows Mobile

Yiwei Zhang,Xiaohui Duan,Jingjie Wang,Laixian Zhang

DOI: https://doi.org/10.1109/wicom.2008.1178

2008-01-01

Abstract:This article presents a design and implementation of a novel wireless remote monitoring system based on Windows Mobile platform, which enables the transmission of image data between pocket PCs and remote monitoring devices via Bluetooth. The designed image transfer protocol in this article provides a stable framework for the delivery of images guarantees the correctness and effectively resolves the problems of retransmission of loss packets.
Environment temperature supervision system based on GPRS

Tao Yufu,Liu Qinghua

DOI: https://doi.org/10.19652/j.cnki.femt.2007.06.019

2007-01-01

Abstract:This paper presented a monitoring system,which applied digital thermometer DS18B20 to measure temperature of storeroom,and used the DSP of TMS320LF2407A to control LCD to display field temperature real-time.The temperature data can be transmitted to PC for processing,displaying,drawing curve,speech broadcasting, printing and saving through COM.Especially,it can set temperature limitation to alarm.In the same time,the alarm information send to the administrator's mobile phone through GPRS in short message,so the administrator can deal with the fire disaster conveniently and timely.Additionally,the temperature data also can be shared on LAN.
Design of Embedded Remote Monitoring System Based on ZigBee and GPRS

ZHANG Yong-mei,WANG Kai-feng,MA Li,YANG Chong

DOI: https://doi.org/10.3969/j.issn.1002-137x.2012.06.055

2012-01-01

Computer Science

Abstract:In order to realize the remote monitoring of wireless sensor,a design scheme combined with ZigBee network and GPRS network was proposed with advantage and features of ZigBee and GPRS respectively.Data collection,converging,transferring and remote monitoring could be completed through the cooperation between the wireless sensor network constituted by CC2530 and the mobile communication network with widespread popularity.Experiment results show that the scheme combines the advantage of each network,strengthens the real-time monitoring ability and processing ability of the remote node in the network.
Design and implementation of remote multiple physiological parameters monitoring system

Chen Wei,Zhang Yue

DOI: https://doi.org/10.1109/ICSESS.2014.6933673

2014-01-01

Abstract:This paper demonstrated the design and implementation of the remote multiple physiological parameters monitoring system. It is researched and designed in order to meet the requirement of understanding the trends for the state of human health, how diseases affect the human body, and the need for monitoring of the multiple physiological parameters (ECG, blood pressure, oxygen saturation, etc.). In this paper, the frame of the system for remote multiple physiological parameters monitoring is introduced, as well as the design and implementation of each module. The remote multiple physiological parameters monitoring system can be divided into several parts: mobile data acquisition system, real-time monitoring software system, medical information system and database system. The result shows that medical and health institutions can make significant improvement by applying the advanced computer and network technology.
Design and Implementation of Wireless Environment Monitoring System Based on STM32

Qu Xilong,Liu Shengzong,Fu Sha,He Hong,Hu Ying,Xiao Leyi

DOI: https://doi.org/10.1155/2021/6070664

2021-10-28

Scientific Programming

Abstract:This paper first designed the overall scheme of a wireless-based intelligent environment monitoring system; this system is comprised of the following four parts: server part, client part, slave computer part, and master computer part. The master computer is equipped with a wireless transmission module and an LCD module. Slave computers are equipped with temperature-humidity sensing modules and wireless transmission modules. The server side has two major interfaces: data display and server establishment. An Android phone as the client can realize the communication between the mobile APP and server through network communication to obtain environmental data in real time. The hardware part of the system consists of wireless transmission module, temperature and humidity module, smoke module, lighting module, flame module, and LCD module. The software implementation part mainly includes the design and implementation of serial communication, the design and implementation of wireless communication, the design and implementation of collection of data acquisition in each sensor module, and the design and implementation of network communication as well as the design and implementation of display unit. With the cooperation of these four parts, we can automatically sense and control the state of the environment to realize human-computer interaction.

computer science, software engineering
Design of Remote Monitoring System Based on STM32F407 Microcontroller

Taoren Li,Feng Luan,Mingquan Wang,Qi Song,Zhan Shi

DOI: https://doi.org/10.1109/icpics47731.2019.8942548

2019-07-01

Abstract:This paper studied an integrated system to accomplish a real-time remote monitor function, which is based on STM32F407 embedded development board, through the Reduced Media Independent Interface (RMII), Flexible Static Memory Controller (FSMC) interface and web development, etc. The STM32F407 embedded development board is a core controller in the system and it is connected to Internet to realize the function of web server with Light Weight IP (LWIP) communication protocol. The value of various sensors can be transmitted to web server in real time with Server Side Include (SSI) instruction, and any device connected to Wi-Fi can realize the remote monitoring function through the router. Experiments are conducted with DS18B20 temperature sensor and the first channel of Analog-to-Digital Converter (ADC1) in STM32F407 to verify the effectiveness of the system. The results show that the embedded remote monitoring system works effectively. The system is convenient and practical in many industries.
Design and realization of low power wireless indoor temperature monitoring system

YUAN Tao

2007-01-01

Abstract:This article designed an indoor temperature monitoring system based on wireless sensor network technology. The system can accomplish the indoor temperature data collection, transmission, storage, analysis, with a low-power, self-organizing feature. According to management center’s command, the management node uses GSM network to send the temperature data and alarm information of the wireless sensor network nodes. The system can meet the heating and cooling system for buildings indoor temperature monitoring needs.
The remote electrical equipment's infrared temperature monitoring system based on GPRS

Jin-hua LIU,Da-neng PI

DOI: https://doi.org/10.3969/j.issn.1009-2714.2014.03.002

2014-01-01

Abstract:The safe operation of electrical equipment in power system , especially the security of unmanned regional such as substation is very important .Electrical equipment fault mostly show the temperature anomaly .We must monitor electrical equip-ment temperature effectively to discover the fault as soon as possible .This paper systematically introduces the operating princi-ple of electrical equipment infrared temperature monitoring system made of monitoring center computer and remote measuring terminal using GPRS wireless mobile network and elaborates the hardware and software design of Infrared temperature measure -ment technology's remote temperature monitoring terminal .

Design Of Remote Real-Time Temperature Monitoring System

[Development of a Wireless Multiple Physiological Parameters Monitoring System].

Water Quality Early-warning System Based on GSM Short Message Service

Design of Greenhouse Remote Monitoring System Base on GPRS

Remote Data Acquisition System Based on SMS

The design of a remote temperature monitoring-control system based on Web

The Design and Realization of Remote Monitor and Control System Based on SMS

Design of the Integrated Remote Monitoring System Based on Internet/GPRS

A Communication Method for the Remote Real-Time Multiple Biological Parameters Monitoring and Analysing System

Design of Wireless Environment Monitoring Terminal Based on CDMA/GPRS/RADIO

Design and Implementation of Mobile Remote Medical Surveillance System

The Design of Remote Medical Monitoring System Based on Sensors and GPRS

Design and Implementation of Portable ECG and Body Temperature Monitor

Design and Implementation of Wireless Monitoring System Based on Windows Mobile

Environment temperature supervision system based on GPRS

Design of Embedded Remote Monitoring System Based on ZigBee and GPRS

Design and implementation of remote multiple physiological parameters monitoring system

Design and Implementation of Wireless Environment Monitoring System Based on STM32

Design of Remote Monitoring System Based on STM32F407 Microcontroller

Design and realization of low power wireless indoor temperature monitoring system

The remote electrical equipment's infrared temperature monitoring system based on GPRS