Abstract:Rotational diffusion processes are correlated with nanoparticle visualization and manipulation techniques, widely used in nanocomposites, nanofluids, bioscience and so on. In the current work, three molecular dynamics (MD) schemes, including two equilibrium (based on MSD relation and autocorrelation function of the angular velocity) and one nonequilibrium methods, are developed to calculate the rotational diffusion coefficient, taking a single rigid carbon nanotube in fluid argon as a case. The three methods produce the same results on the basis of plenty of data with variation of the calculation parameters (tube length, diameter, fluid temperature, density and viscosity), indicative of the validity and accuracy of the MD simulations. However, these results have a non-negligible deviation from the classical literature theory, which is in the framework of continuum-based fluid mechanics and predicts the rotational diffusion coefficient of rodshaped particles. The above deviation may come from some unrevealed factors of the theory at the molecular level, and the adequecy of the theory when applied to pratical situations should be further checked. When a linear shear flow is imposed to the above system, the single carbon nanotube reveals three forms of anomalous orientation behavior in MD simulations: (i) “Aligned orientation” when the nanotube oscillates around a particular direction which is close to the flow direction at a small angle of about 10º in the velocity-gradient plane; (ii) “Interrupted orientation” when the oscillation is interrupted by a 180º rotation now and then; (iii) “Random orientation” when 180º rotations dominate with the rotational direction coinciding with the local fluid flow direction. The Peclet number serves as an important scaling parameter for processing the results. The orientation order has a positive correlation with the Peclet number, and in turn a negative correlation with the rotational diffusion coefficient, when the diameter of the tube is kept fixed. Polarizable graphene oxide (GO) particles are prepared by a modified Hummers method, and then they are dispersed in silicone oil to test its electro-responsive thermal properties under imposed DC electric fields. Experiments show a fibrillar structure along the DC electric direction is formed and the structure becomes more ordered with the increase of the electric strength. We further observe that along the oriented direction the thermal conductivity can be enhanced compared to the equilibrium state and the situation can be reversed when the electric fields are removed. At the experimental temperature of 25°C and 50°C, the dispersion with a GO mass fraction of about 1% shows a tunable thermal conductivity in the range of 100%~130% below the electric strength of 300 V/mm. In this way, the method of tuning thermal conductivities based on the orientation control of low-dimensional particles is proposed to meet the situation in which a real-time regulation of the thermal properties is required.

Scaling relation between current through suspensions of carbon-doped nanoporous TiO2 submicron particles in silicone oil and reciprocal of shear rate under combined electric and shear fields

Modelling of Turbulent Shear Controllable Co-Precipitation Synthesis of Lithium Ion Battery Cathode Precursor Micro-Particles in a Taylor-Couette Flow Reactor with Variable Configurations of Inner Cylinder

Rheological Behavior of Titanium Dioxide Suspensions

ELECTRORHEOLOGICAL BEHAVIOR OF THE SUSPENSIONS OF SURFACTANT COATED TiO2

Electrorheological suspensions of laponite in oil: rheometry studies under steady shear

Silicone-grafted Carbonaceous Nanotubes with Enhanced Dispersion Stability and Electrorheological Efficiency

Composites of Co-Doped Graphitic C3N4 Nanosheets and TiO2 Nanoparticles for Electrorheological Fluid Applications

Shear-rate Dependent Effective Thermal Conductivity of H2O+SiO2 Nanofluids

Titanium oxide-coated titanium-loaded metal organic framework (MOF-Ti) nanoparticles show improved electrorheological performance

Electrorheological Characterization of Ultrathin Titanium Dioxide Nanorods Solutions Using Microfluidics

Synthesis and Electrorheological Characteristics of Titanate Nanotube Suspensions under Oscillatory Shear

Thermal Transport in Sheared Nanoparticle Suspensions: Effect of Temperature

<strong>ROTATIONAL DIFFUSION AND ORIENTATION OF NANOPARTICLES</strong>

Dynamical steady Carreau fluid with heat generation and porosity effect in a suspension of hybrid solid and dust particles

Shear-Induced Aggregation and Distribution in Photocatalysis Suspension System for Hydrogen Production

Abrasion properties of self-suspended hairy titanium dioxide nanomaterials

Multiscale rheology from bulk to nano using a quartz tuning fork-atomic force microscope

The electrorheology of suspensions consisting of Na-Fluorohectorite synthetic clay particles in silicon oil

Unusual Photorheological Properties of TiO2 Nanoparticle Suspensions under UV Light Irradiation

The Giant Electrorheological Effect in Suspensions of Nanoparticles

Effect of Accelerating Gas Flow on Pore Structure and Mass Transport Property of Vacuum Cold Sprayed TiO2 Coatings Using Strengthened Nanostructured Powder