Abstract:In the petroleum industry, organic surfactant type inhibitors have been widely applied in the oil and gas industry considering their high efficiency. Carbon steels with various carbide contents have also been used extensively as pipeline materials during the transport and storage of crude oil due to their excellent mechanical properties and low cost. The previous investigation of inhibition mechanism on carbon steel is limited by lack of surface characterization techniques at a molecular level. Atomic force microscopy (AFM) can not only provide localized visual observation, but can also achieve the detection of mechanical properties of an inhibitor film. In this study, in situ AFM contact mode friction imaging and in situ AFM tapping mode phase imaging techniques have been applied to investigate the influence of the ferritic-pearlitic microstructure of carbon steel on inhibitor adsorption mechanisms during CO 2 corrosion under different inhibitor concentrations. At concentration above surface saturation, AFM contact mode friction images show a large friction contrast between inhibitor covered cementite structures and ferrite structures, while in the absence of inhibitor, this friction contrast almost disappears, indicating the inhibitor adsorption induced this difference. AFM tapping mode phase images indicate uniform adsorption of inhibitor on both cementite and ferrite structures.The differences observed in these AFM analyses indicate that the adhesion force of inhibitor molecules on cementite could be smaller than on ferrite, or the molecular orientations of inhibitor molecules adsorbed on cementite and ferrite structures could be different. The special adsorption behavior of inhibitor molecules on cementite means the carbide component of the microstructure could directly influence inhibitor adsorption and may decrease inhibitor efficiency. Simultaneous linear polarization resistance tests in electrochemical AFM (EC-AFM) cell indicates a maximum inhibition efficiency at concentration above saturation. Keywords : Contact mode AFM, friction contrast, tapping mode AFM, phase contrast, cementite, ferrite, organic inhibitor, adhesion force. Statement of importance: Studies related to inhibitor adsorption mechanisms on ferritc-pearlitic carbon steels can be connected with the practical issues that iron carbide can impair the corrosion inhibitor performance on carbon steels. This AFM work connects the corrosion inhibition effect with the carbon steel components at a molecular level for the first time. Physical explanations regarding the interactions between inhibitor molecules and carbon steel microstructures can also be provided with the assistance of molecular simulations. Figure caption: Contact and tapping mode AFM images of inhibitor film formed on UNS G1018 steel at 2 CMC (100ppm) tetradecyldimethylbenzylammonium inhibitor + 1 wt% NaCl. The contact mode friction image indicates a large friction contrast between inhibitor covered cementite and ferrite structure, while the tapping mode phase image indicates a negligible softness contrast between cementite and ferrite structure. Figure 1

INVESTIGATION OF THE ADSORPTION BEHAVIOR OF DODECYLAMINE ON CARBON STEEL

Adsorption behavior of dodecylbenzyldimethyl ammonium bromide on iron surface and its synergistic inhibition effect on cinnamaldehyde in hydrochloric acid

The inhibition performance of heterocyclic compounds on Q235 steel in methanol/formic acid medium: Experimental and theory

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

(Digital Presentation) Investigation of Microstructure Dependent Inhibitor Adsorption Mechanism on Carbon Steel By in Situ Atomic Force Microscopy

Study on corrosion and inhibition mechanism in H2S aqueous solutions - viii. The adsorption behavior of imidazoline derivates on the mild steel electrodes in H2S solutions

Investigation of Corrosion Inhibitor Adsorption on Mica and Mild Steel Using Electrochemical Atomic Force Microscopy and Molecular Simulations

Electrochemical and Theoretical Study of Corrosion Inhibition on Carbon Steel in 1M HCl Medium by 1,10-Bis(4-Amino-3-Methyl-1,2,4-Triazole-5-Thioyl)Decane

Adsorption Mechanism, Kinetics, Thermodynamics, and Anticorrosion Performance of a New Thiophene Derivative for C-Steel in a 1.0 M HCl: Experimental and Computational Approaches

Effect of Concentration and Addition of Ions on the Adsorption of Sodium Dodecyl Sulfate on Stainless Steel Surface in Aqueous Solutions

Effects of carboxyl groups on the adsorption behavior of low-molecular-weight substances on a stainless steel surface

Two α-aminophosphonics acids as corrosion inhibitors for carbon steel in 0.5 M HCl: Electrochemical and DFT/MD simulation.

Unraveling the corrosion inhibition mechanism of triazine derivatives for carbon steel: Experimental and theoretical insights into interfacial adsorption

Effect of anion on the corrosion inhibition of cationic surfactants and a mechanism study

Corrosion Behavior of Carbon Steel in Diethylenetriamine Solution for Post-combustion CO2 Capture.

Influence of Hydroxyl Groups on the Inhibitive Corrosion of Gemini Surfactant for Carbon Steel

The adsorption of two organic inhibitors on stainless steel passive film: A reactive force field study

Experimental and Computational Study on Inhibitory Effect and Adsorption Properties of N-Acetylcysteine Amino Acid in Acid Environment

CORROSION INHIBITION EFFECT OF BISQUATERNARY AMMONIUM SALT OF ROSIN GROUP TO MILD STEEL IN HYDROCHLORIC ACID

Corrosion Inhibition Effect of N-(4-diethylaminobenzyl) Quaternary Ammonium Chitosan for X80 Pipeline Steel in Hydrochloric Acid Solution

Synergistic Inhibition Properties and Microstructures of Self-Assembled Imidazoline and Phosphate Ester Mixture for Carbon Steel Corrosion in the CO2 Brine Solution