Abstract:This paper presents a novel interleaved soft-switching bidirectional snubberless current-fed full-bridge voltage doubler (dc/dc converter) for an energy storage system in fuel cell electric vehicles. A novel secondary modulation technique is also proposed to clamp the voltage across the primary-side switches naturally with zero-current commutation. It, therefore, eliminates the necessity for an external active-clamped circuit or passive snubbers to absorb the switch turn-off voltage spike, a major challenge in current-fed converters. Zero-current switching of primary-side devices and zero-voltage switching of secondary-side devices are achieved, which significantly reduce switching losses. An interleaved design is adopted over a single cell to increase the power handling capacity obtaining merits of lower input current ripple, reduction of passive components' size, reduced device voltage and current ratings, reduced conduction losses due to current sharing, and better thermal distribution. Primary device voltage is clamped at rather low-reflected output voltage, which enables the use of low-voltage semiconductor devices having low on-state resistance. Considering input current is shared between interleaved cells, conduction loss of the primary side, a considerable part of total loss, is significantly reduced and higher efficiency can be achieved to obtain a compact and higher power density system. Steady-state operation, analysis, and design of the proposed topology have been presented. Simulation is conducted over software package PSIM 9.0.4 to verify the accuracy of the proposed analysis and design. A 500-W prototype has been built and tested in the laboratory to validate the converter performance.

Interleaved ZVT Boost Converters with Winding-Coupled Inductors and Built-In LC Low Pass Output Filter Suitable for Distributed Fuel Cell Generation System

Improved High Step-Up Dc-Dc Converter Based on Active Clamp Coupled Inductor with Voltage Double Cells

Interleaved High Step-Up Converter with Coupled Inductor and Blocking Capacitor

Three-phase interleaved high step-up boost converter with voltage multiplier for fuel cell power system

A High Step-Up DC-DC Converter with Intermediate Capacitor and Coupled Inductors

Interleaved Boost Converters with Built-in Voltage-Doubler and Current Auto-Balance Characteristic

A High Step-Up DC to DC Converter under Alternating Phase Shift Control for Fuel Cell Power System

A Three-Phase Interleaved Floating Output Boost Converter

Interleaved Converter with Voltage Multiplier Cell for High Step-Up and High-Efficiency Conversion

High step-up soft switching interleaved boost converters with cross-winding-coupled inductors and reduced auxiliary switch number

An Isolated Interleaved Active-Clamp ZVT Flyback-Boost Converter with Coupled Inductors

Novel Interleaved Bidirectional Snubberless Soft-Switching Current-Fed Full-Bridge Voltage Doubler for Fuel-Cell Vehicles

Single-Stage Single-Phase High-Step-Up ZVT Boost Converter for Fuel-Cell Microgrid System

An Interleaved Winding-Coupled Boost Converter with Passive Lossless Clamp Circuits

High Step-Up Interleaved Converter with Built-In Transformer Voltage Multiplier Cells for Sustainable Energy Applications

ZVT interleaved boost converter with intrinsic voltage-doubler characteristic

Interleaved High Step-Up ZVT Converter with Built-In Transformer Voltage Doubler Cell for Distributed PV Generation System

High Step-up DC/DC Converter Based on Switched Inductor and Switched Capacitor Unit

A Family of Isolated Interleaved Boost and Buck Converters with Winding-Cross-Coupled Inductors

A New Coupled-Inductor-Based High-Gain Interleaved DC-DC Converter With Sustained Soft Switching

Designing and Analysis of an Interleaved Boost Converter with Passive Lossless Clamp Circuits