Present Status of Plastic Working for Wrought Magnesium Alloy and Its Future

Weiping Chen,Meiyan Zhan,Wande Chen,Datong Zhang,Yuanyuan Li

DOI: https://doi.org/10.3321/j.issn:1001-2249.2007.01.014

2007-01-01

Abstract:The last progress in application and development of wrought magnesium alloy, and in plastic deformation characteristics and working technologies has been described. The developing tendency of wrought magnesium alloy has been reviewed.

What problem does this paper attempt to address?

Magnesium Alloy Characteristics and Developments of Its Plastic Forming Technology

Z. Zhimin

Abstract:The characteristics and properties of magnesium alloys and its application in aeronautical field,cars industry and 3C products are introduced.The status and development of its plastic forming is elaborated.The technical characteristics and technological key of extruding forming,forging forming,isothermal forging,superplasticity forming and severe plastic deformation of Magnesium alloy is analyzed.

Engineering,Materials Science
Developments of Wrought Mg Alloys

YAN Yongnian,LI Maosheng,LIN Feng,WU Rendong,ZHANG Renji

DOI: https://doi.org/10.3321/j.issn:1000-0054.2007.05.001

2007-01-01

Abstract:Mg alloy products are mostly made by casting,which allows the manufacturing of parts with complex geometries.However,parts manufactured by forming have better mechanical properties and fine-grained microstructures without pores.The International Magnesium Association indicates that a key problem is to develop new wrought Mg alloys and processing technologies to increase the applications of Mg alloys.This paper introduces several research developments for wrought Mg alloys worldwide,as well as the advantages and disadvantages of the Chinese research.Analyses show that Chinese researchers should develop new technologies to fabricate wrought Mg alloys with better mechanical properties,especially Mg alloy sheets for worldwide sales.
Recent research and developments on wrought magnesium alloys

Sihang You,Yuanding Huang,Karl Ulrich Kainer,Norbert Hort

DOI: https://doi.org/10.1016/j.jma.2017.09.001

IF: 11.813

2017-09-01

Journal of Magnesium and Alloys

Abstract:Wrought magnesium alloys attract special interests as lightweight structural material due to their homogeneous microstructure and enhanced mechanical properties compared to as-cast alloys. In this contribution, recent research and developments on wrought magnesium alloys are reviewed from the viewpoint of the alloy design, focusing on Mg-Al, Mg-Zn and Mg-rare earth (RE) systems. The effects of different alloying elements on the microstructure and mechanical properties are described considering their strengthening mechanisms, e.g. grain refinement, precipitation and texture hardening effect. Finally, the new alloy design and also the future research of wrought magnesium alloys to improve their mechanical properties are discussed.

metallurgy & metallurgical engineering
Application Status and Prospects of Friction Stir Processing in Wrought Magnesium Alloys: A Review

Zeyu Zheng,Quanan Li,Xiaoya Chen,Ao Gao,Nana Zhang

DOI: https://doi.org/10.1007/s12666-024-03290-3

2024-03-14

Transactions of the Indian Institute of Metals

Abstract:As an industrially reliable, controllable and effective deformation technique, friction stir process (FSP) can significantly refine the grain size, effectively activate prismatic plane and pyramidal plane slip systems of wrought magnesium alloys through intense plastic deformation and grain refinement, improving the mechanical properties and plasticity simultaneously. Therefore, more and more researchers are devoted to revealing the relationship between grain size, morphology and distribution of precipitated phases, and texture modification with the mechanical properties of magnesium alloys after FSP by means of some characterization techniques, such as electron backscattering diffraction, scanning electron microscopy and transmission electron microscopy. In this paper, the research results of FSP in wrought magnesium alloys in the last five years are reviewed. The fundamental principle and advantages of the FSP process are introduced, and the effects of the FSP process parameters and tool size on the microstructure characteristics, textile evolution, dynamic recrystallization mechanism and mechanical properties of Mg–Al–Zn, Mg–Li and Mg–Zn–Zr wrought magnesium alloys are analyzed emphatically. The preparation of ultrafine crystalline microstructures and achievement of superplastic behavior by modification of FSP are discussed in classification. In addition, the current status of metal additive manufacturing processes based on stirred friction processing (such as friction stir additive manufacturing and additive friction stir deposition) in wrought magnesium alloys is discussed in detail. Finally, the future research development and application of FSP in wrought magnesium alloys are prospected. Some reasonable suggestions are put forward to address the existing problems at this stage, which can provide references for further research in the future.

metallurgy & metallurgical engineering
Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

c y gao,l c zhang,w g guo,y l li,w r lu,y l ke

DOI: https://doi.org/10.1016/j.msea.2014.06.112

2014-01-01

Abstract:This paper investigates the mechanisms of plastic deformation in magnesium alloys, both experimentally and theoretically. The focus of the study is to understand the dynamic response and microstructural evolution of AZ31 magnesium alloy under very high strain rates. Both the dynamic and quasi-static compressive tests were carried out in conjunction with the microstructural observations on the texture-eliminated AZ31 samples deformed under different loading conditions, to reveal the relation between the properties and microstructure of the material during plastic deformation. It was found that under quasi-static loading, deformation twinning/untwinning plays a key role in the plastic deformation of this alloy at medium high temperature, while at high strain rates, grain refinement due to dynamic recrystallization becomes the most important factor. A unified macro-microscopic constitutive model was then physically established to describe the thermo-viscoplastic flow behavior of the hcp materials in a broad range of coupled strain rates (0.001/s–21,000/s) and temperatures (77–523K). It was concluded that the predictions by the unified model are in agreement with the experimental results and the model has a good effectiveness under both quasi-static and very high strain rates compared with other one-fold models. Especially, the new model can depict well the upturn phenomenon in the flow stress of the material at high strain rates.
Latest research advances on magnesium and magnesium alloys worldwide

Jiangfeng Song,Jia She,Daolun Chen,Fusheng Pan

DOI: https://doi.org/10.1016/j.jma.2020.02.003

IF: 11.813

2020-03-01

Journal of Magnesium and Alloys

Abstract:In the past two years, significant progresses have been achieved in high-performance cast and wrought magnesium and magnesium alloys, magnesium-based composites, advanced cast technologies, advanced processing technologies, and functional magnesium materials, such as Mg ion batteries, hydrogen storage Mg materials, bio-magnesium alloys, etc. Great contributions to the development of new magnesium alloys and their processing technologies have been made by Chongqing University, Shanghai Jiaotong University, Chinese Academy of Sciences, Helmholtz Zentrum Geesthacht, Queensland University, Brunel University, etc. This review paper is aimed to summarize the latest important advances in cast magnesium alloys, wrought magnesium alloys and functional magnesium materials worldwide in 2018–2019, including both the development of new materials and the innovation of their processing technologies. Based on the issues and challenges identified here, some future research directions are suggested, including further development of high-performance magnesium alloys having high strength and superior plasticity together with high corrosion resistance and low cost, and fundamental research on the phase diagram, diffusion, precipitation, etc., as well as the development of advanced welding and joining technology.

metallurgy & metallurgical engineering
Uncovering the influence of deformation amount on microstructure evolution and mechanical behavior of the multi-DoF formed WE43 magnesium alloy

Fang Chai,Jianqiang Feng,Xinghui Han,Zhiyuan Ma,Xuan Hu,Lin Hua

DOI: https://doi.org/10.1016/j.jmrt.2024.11.084

IF: 6.267

2024-11-13

Journal of Materials Research and Technology

Abstract:The urgent need of improving energy efficiency accelerates the development of lightweight magnesium alloy, especially for high-performance wrought magnesium alloy. In this research, multi-degrees of freedom (multi-DoF) forming process as a novel severe plastic deformation technique was applied to the forged-annealed WE43 magnesium alloy plates. The effect of deformation amounts ranging from 10% to 40% on microstructure and mechanical property of the experimental material was investigated in detail. Initially forged-annealed WE43 magnesium alloy is composed of rodlike-shaped Mg 12 Nd and cuboid-shaped Mg 24 Y 5 at the grain boundaries as well as globular-shaped Mg 41 Nd 5 inside the grains. Multi-DoF forming process results in remarkable microstructure change, which is characterized by increasing dissolution of these second phases, grain refinement, formation of twins and disappearance of basal texture in WE43 magnesium alloy with deformation amounts increasing. Compared with the initial forged-annealed one, the multi-DoF formed WE43 magnesium alloy displays an increasing tensile strength but a decreasing plasticity with deformation amounts increasing. The increasingly improved strength is mainly attributed to the joint contribution of increasing solution strengthening, fine-grained strengthening and work hardening, while the increasingly decreased plasticity is mainly attributed to the increasing dislocation despite the basal texture disappearing. This research will provide a novel method of fabricating high-performance wrought magnesium alloy.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Asymmetric Extrusion Technology of Mg Alloy: A Review

Qingshan Yang,Dan Zhang,Peng Peng,Guobing Wei,Jianyue Zhang,Bin Jiang,Fusheng Pan

DOI: https://doi.org/10.3390/ma16155255

IF: 3.4

2023-07-27

Materials

Abstract:Magnesium (Mg) alloy is a widely used lightweight metal structural material due to its high specific strength and stiffness, excellent damping performance, and recyclability. Wrought Mg alloys are particularly favored in fields such as aerospace, transportation, and biomedical stents. However, most wrought Mg alloys with a hexagonal close-packed (HCP) crystal structure lack sufficient independent slip systems to meet the von Mises criterion for uniform plastic deformation at room temperature. This can result in the formation of a strong basal texture during plastic deformation and poor room temperature plastic formability. Enhancing the room temperature forming performance is therefore a crucial challenge that needs to be addressed in order to expand the application of Mg alloy sheets. Our research group has comprehensively summarized significant work and the latest research progress in improving the room temperature forming of Mg alloy sheets via extrusion technology in recent years. Specifically, we have developed a new type of asymmetric extrusion technology that combines material structure evolution, mechanical properties, and forming behavior analysis. We have elucidated the extrusion process characteristics, texture control mechanism, and forming properties of Mg alloy sheets through plastic deformation mechanisms, mold design, and finite element numerical simulation. The findings of our study present an innovative extrusion technology for the fabrication of highly formable Mg alloy sheets, which can be utilized in various applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Recent research and advances in extrusion forming of magnesium alloys: A review

Yuan Qi Li,Feng Li,Fu Wei Kang,Hua Qiu Du,Zi Yu Chen

DOI: https://doi.org/10.1016/j.jallcom.2023.170080

IF: 6.2

2023-08-01

Journal of Alloys and Compounds

Abstract:Extrusion process is one of the main means of forming lightweight and low plastic magnesium alloy components. In order to solve the long-term bottlenecks which restrict the rapid development of magnesium alloy extrusion forming technology, such as small process window, high energy consumption, difficulty in shape/property coordination control, single product structure and function, new processes and methods are constantly emerging and applied. Compared with the traditional magnesium alloy extrusion forming technology, the effects of deep fine grain modification and load reduction are achieved by the way of exquisite design of die structure or split billet combination mode and the transformation of die movement or loading mode. High-speed and low-temperature extrusion are realized from the perspective of new alloy composition design. The manufacturing of magnesium alloy arc and its solid-state connection with heterogeneous alloy sheet are realized by improving the tooling structure. In addition, the solid phase recovery and regeneration of magnesium alloy waste can also be carried out by extrusion process. It provides scientific guidance and technical reserves for accelerating the development of deep processing technology of magnesium and its alloys, and it also expands the application range of high value-added magnesium alloy products.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Research progress on selective laser melting (SLM) of magnesium alloys: A review

Wan-neng Zhang,Lin-zhi Wang,Zhong-xue Feng,Yu-ming Chen

DOI: https://doi.org/10.1016/j.ijleo.2019.163842

IF: 3.1

2020-04-01

Optik

Abstract:<p>Selective laser melting (SLM) technology has broad prospects and important significance for developing high-performance and complex structural materials. Magnesium alloy, as one of the lightest structural materials, is well known to have high bio-compatibility, excellent specific strength and specific stiffness. Therefore, significant progress has been made on processing parameters and the structures of the SLM fabricated Mg alloys. We review the current state of research and progress from different perspectives of the SLM, SLM parameters, metallurgical process and microstructure evolution, metallurgical defects, and mechanical properties as well as corrosion properties in order to provide a basis for follow-on-research that leads to the development of high productivity. In addition, the problems in the research and future development of SLMed Mg alloys are also discussed in the final part.</p>

optics
What is going on in magnesium alloys?

X.J. Wang,D.K. Xu,R.Z. Wu,X.B. Chen,Q.M. Peng,L. Jin,Y.C. Xin,Z.Q. Zhang,Y. Liu,X.H. Chen,G. Chen,K.K. Deng,H.Y. Wang

DOI: https://doi.org/10.1016/j.jmst.2017.07.019

IF: 10.319

2018-02-01

Journal of Materials Science and Technology

Abstract:China has been developed into one of the most active regions in terms of both fundamental and applied research on magnesium (Mg) and its alloys in the world from a solid base laid by its prominent metallurgist and materials scientists over the past decades. Nowadays, a large number of young-generation researchers have been inspired by their predecessors and become the key participants in the fields of Mg alloys, which consequently led to the establishment of China Youth Scholar Society for Magnesium Alloys Research in 2015. Since then, the first two China Youth Scholars Symposiums on Mg Alloys Research had been held at Harbin (2015) and Chongqing (2016) China, respectively. A number of crucial research interests related to fundamental and applied Mg research were discussed at the conferences and summarized in this short perspective, aiming to boost far-reaching initiatives for development of new Mg-based materials to satisfy the requirements for a broad range of industrial employments. Herein, four main aspects are included as follows: i) Plastic deformation mechanism and strengthening strategy, ii) Design and development of new Mg-based materials, iii) Key service properties, and iv) New processing technologies.
Recent research and development on forming for large magnesium alloy components with high mechanical properties

Zhimin Zhang,Jianmin Yu,Yong Xue,Beibei Dong,Xi Zhao,Qiang Wang

DOI: https://doi.org/10.1016/j.jma.2023.09.038

IF: 11.813

2023-11-01

Journal of Magnesium and Alloys

Abstract:The lightweight of high-end equipment relies on high mechanical properties magnesium (Mg) alloy structural components, because it is the best way to improve equipment service performance and reduce energy consumption. This article summarizes the current progress and characteristics of large-scale high-performance Mg alloy components by analyzing the strengthening-toughening mechanisms, characteristics of plastic forming, and the preparation of large high mechanical properties forging blanks. Due to the lack of breakthroughs in the key technologies for forming large-scale Mg alloy components, their uniformity of mechanical properties and consistency are poor, the forming accuracy of components is low, and the production cost is high, which limit their engineering application and restrict the lightweight level of high-end equipment. In view of the above problems, the forming trends and research directions of large-scale and high mechanical properties Mg alloy components are proposed in this paper. It can provide help for the breakthrough of the key technology of large-scale Mg alloy components with high mechanical properties and expand the application of Mg alloy in high-end products.

metallurgy & metallurgical engineering
Research Progress of Aluminum Alloy Welding/Plastic Deformation Composite Forming Technology in Achieving High-Strength Joints

Gang Song,Zejie Wang,Xiaoyu Fan,Liming Liu

DOI: https://doi.org/10.3390/ma16247672

IF: 3.4

2023-12-16

Materials

Abstract:Fusion welding causes joint deterioration when joining aluminum alloys, which limits the use of aluminum alloy components in high-end equipment. This paper focuses on an overview of how to achieve high-strength aluminum alloy welded joints using welding/plastic deformation composite forming technology. The current technology is summarized into two categories: plastic deformation welding and plastic deformation strengthening. Plastic deformation welding includes friction stir welding, friction welding, diffusion welding, superplastic solid-state welding, explosive welding, and electromagnetic pulse welding. Plastic deformation strengthening refers to the application of plastic deformation to the weld seam or heat-affected zone, or even the whole joint, after welding or during welding, including physical surface modification and large-scale plastic deformation technology. Important processing parameters of plastic deformation welding and their effects on weld quality are discussed, and the microstructure is described. The effect of plastic deformation strengthening technology on the microstructure and performance evolution, including the hardness, tensile strength, fatigue property, residual stress, and hot cracking of aluminum alloy welded joints, and its evolution mechanism are systematically analyzed. Finally, this paper discusses the future development of plastic deformation strengthening technology and anticipates growing interest in this research area.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Recent progress and perspectives in additive manufacturing of magnesium alloys

Zhuoran Zeng,Mojtaba Salehi,Alexander Kopp,Shiwei Xu,Marco Esmaily,Nick Birbilis

DOI: https://doi.org/10.1016/j.jma.2022.03.001

IF: 11.813

2022-06-01

Journal of Magnesium and Alloys

Abstract:Magnesium alloys remain critical in the context of light-weighting and advanced devices. The increased utilisation of magnesium (Mg) each year reveals growing demand for its Mg-based alloys. Additive manufacturing (AM) provides the possibility to directly manufacture components in net-shape, providing new possibilities and applications for the use of Mg-alloys, and new prospects in the utilisation of novel physical structures made possible from ‘3D printing’. The review herein seeks to holistically explore the additive manufacturing of Mg-alloys to date, including a synopsis of processes used and properties measured (with a comparison to conventionally prepared Mg-alloys). The challenges and possibilities of AM Mg-alloys are critically elaborated for the field of mechanical metallurgy.

metallurgy & metallurgical engineering
Recent advances in micro-alloyed wrought magnesium alloys: Theory and design

Bin JIANG,Zhi-hua DONG,Ang ZHANG,Jiang-feng SONG,Fu-sheng PAN

DOI: https://doi.org/10.1016/s1003-6326(22)65907-7

IF: 3.752

2022-06-01

Transactions of Nonferrous Metals Society of China

Abstract:Micro-alloying design of wrought magnesium (Mg) alloys is an important strategy to achieve high mechanical properties at a low cost. In the last two decades, significant progress has been made from both theory and experiment. In the present review, we try to summarize recent advances in micro-alloying design of wrought Mg alloys from both theoretical and pragmatic perspectives, and provide fundamental data required for establishing the relationship between chemical composition and mechanical properties of Mg alloys. We start with theoretical attempts for understanding the mechanical properties of Mg alloys at different scales, by involving first principle calculations, molecular dynamics, cellular automata, and crystal plasticity. Then, the role of alloying elements is discussed for a series of promising Mg alloys such as Mg-Al, Mg-Zn, Mg-RE (rare-earth element), Mg-Sn, and Mg-Ca families. Potential challenges in the micro-alloying design of Mg alloys are highlighted at the end. The review is expected to provide helpful guidance for the intelligent design of novel wrought Mg alloys and inspire more innovative ideas in this field.

metallurgy & metallurgical engineering
Macro-/micro-structures and mechanical properties of magnesium alloys based on additive manufacturing: a review

Tian-Shuai Wang,Zhen-Ming Hua,Yajie Yang,Hai-Long Jia,Cheng Wang,Min Zha,Yipeng Gao,Hui-Yuan Wang

DOI: https://doi.org/10.1007/s10853-024-09455-1

IF: 4.5

2024-03-14

Journal of Materials Science

Abstract:Additive manufactured (AM) technology as a novel fabrication method provides an unprecedented ability to completely design parts freely and breaks through the limitations of traditional approaches to manufacture complex structural parts. Meanwhile, magnesium (Mg) and its alloys as the lightest structural metal materials are among the most promising materials and always catch research attention. The combination of AM and Mg alloys would certainly provide new impetus for the practical application of Mg alloys. Although the research of AM-Mg alloys has made some progress and some AM-Mg alloys with impressive properties have been developed, there are still some intractable issues that hinder the further development and application of AM-Mg alloys. This paper provides a short review of the recent progress achieved in AM-Mg alloys, with a specific focus on selective laser melting (SLM), wire-arc additive manufacturing (WAAM), and solid-state AM technologies including additive friction stir (AFS) and friction stir additive manufacturing (FSAM). The defects, microstructure, and mechanical properties of AM-Mg products are summarized based on the type of AM technique. Besides, the effect of post-treatment on macro- and microstructures of SLM-Mg and WAAM-Mg alloys is also summarized. In addition, further perspectives and potential research directions are proposed for the development of AM-Mg alloys. This review could provide insights into the development of AM-Mg alloys with enhanced mechanical properties and promote the application of AM-Mg alloys.

materials science, multidisciplinary
New Studies in the Field of Alloying and Deformation of Modern Magnesium Alloys. Review

E. F. Volkova,M. V. Akinina,I. V. Mostyaev,V. A. Duyunova,A. A. Alikhanyan

DOI: https://doi.org/10.1134/S0036029522030120

2022-04-28

Russian Metallurgy (Metally)

Abstract:Foreign works containing the results of new studies in the field of alloying and deformation of modern magnesium alloys are reviewed. Attention is shown to be paid to studying the effect of increasing the properties of the alloys containing various rare earth metals (REM), including alloys with a low REM content. Attention is also paid to LPSO-phase-containing alloys. In such alloys, a specific mechanism of deformation kink bands in LPSO phases during deformation is operative, and it promotes an increase in the strength properties of a deformed semifinished product. The processes accompanied by superplastic deformation (SPD) are being actively studied. Many studies are aimed at developing new complex schemes of preliminary deformation to facilitate SPD. The application of a unique scheme of preliminary deformation of a serial ZK60 alloy was shown to give rise to a very high strain-rate sensitivity ( m = 0.57–0.62). Magnesium wrought alloys are still in the focus of research as a modern significant structural material.
Review on Research and Development of Magnesium Alloys

Z. Yang,J.P. Li,J.X. Zhang,G.W. Lorimer,J. Robson,Z YANG,J LI,J ZHANG,G LORIMER,J ROBSON

DOI: https://doi.org/10.1016/s1006-7191(08)60054-x

2008-10-01

Acta Metallurgica Sinica (English Letters)

Abstract:The current research and development of magnesium alloys is summarized. Several aspects of magnesium alloys are described: cast Mg alloy, wrought Mg alloy, and novel processing. The subjects are discussed individually and recommendations for further study are listed in the final section.
Development and Prospects of Biodegradable Magnesium Alloys

ZHENG Yufeng,GU Xuenan,LI Nan,ZHOU Weirui

2011-01-01

Abstract:Magnesium alloys have attracted increasing attention as new biodegradable metal materials and have been widely researched in recent years.The development of magnesium alloys has been reviewed from four aspects: engineering Mg alloy,newly designed Mg alloy,surface modified Mg alloy,and Mg alloy with novel structure.The investigated results in alloy design,mechanical property,corrosion property,cytotoxicity,and animal test have been systematically introduced and summarized.Finally,the unsolved scientific problems of biodegradable magnesium alloys and their possible applications are proposed.
Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation

Chang-Rong Song,Si-Yu Zhang,Lin Liu,Hong-Yu Yang,Jie Kang,Jia Meng,Chang-Jie Luo,Cheng-Gang Wang,Kuang Cao,Jian Qiao,Shi-Li Shu,Ming Zhu,Feng Qiu,Qi-Chuan Jiang

DOI: https://doi.org/10.3390/ma17174235

IF: 3.4

2024-08-29

Materials

Abstract:Al-Mg alloys are widely used as important engineering structural materials in aerospace engineering, transportation systems, and structural constructions due to their low density, high specific strength, corrosion resistance, welding capability, fatigue strength, and cost-effectiveness. However, the conventional Al-Mg alloys can no longer fully satisfy the demands of practical production due to difficulties caused by many defects. The high strength of Al-Mg alloys as non-heat treatment precipitation-strengthened alloys is achieved primarily by solid solution strengthening along with work hardening rather than precipitation strengthening. Therefore, severe plastic deformation (SPD) techniques can be often used to produce ultrafine-grained structures to fabricate ultra-high strength aluminum alloys. However, this approach often achieves the strengthening of material at the cost of reduced ductility. This paper comprehensively summarizes the various approaches of ultrafine/nanocrystalline materials for enhancing their plasticity, elaborates on the creation of a bimodal microstructure within the alloy, and discusses the formation of a nanotwin microstructure within the alloy and the incorporation of dispersed nanoparticles. The mechanisms underlying both the strengthening and toughening during large plastic deformation in aluminum alloys are summarized, and the future research direction of high-performance ultrafine crystalline and nanocrystalline Al-Mg aluminum alloys is prospected.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

Present Status of Plastic Working for Wrought Magnesium Alloy and Its Future

Magnesium Alloy Characteristics and Developments of Its Plastic Forming Technology

Developments of Wrought Mg Alloys

Recent research and developments on wrought magnesium alloys

Application Status and Prospects of Friction Stir Processing in Wrought Magnesium Alloys: A Review

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

Latest research advances on magnesium and magnesium alloys worldwide

Uncovering the influence of deformation amount on microstructure evolution and mechanical behavior of the multi-DoF formed WE43 magnesium alloy

Asymmetric Extrusion Technology of Mg Alloy: A Review

Recent research and advances in extrusion forming of magnesium alloys: A review

Research progress on selective laser melting (SLM) of magnesium alloys: A review

What is going on in magnesium alloys?

Recent research and development on forming for large magnesium alloy components with high mechanical properties

Research Progress of Aluminum Alloy Welding/Plastic Deformation Composite Forming Technology in Achieving High-Strength Joints

Recent progress and perspectives in additive manufacturing of magnesium alloys

Recent advances in micro-alloyed wrought magnesium alloys: Theory and design

Macro-/micro-structures and mechanical properties of magnesium alloys based on additive manufacturing: a review

New Studies in the Field of Alloying and Deformation of Modern Magnesium Alloys. Review

Review on Research and Development of Magnesium Alloys

Development and Prospects of Biodegradable Magnesium Alloys

Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation