Abstract:The precise rotation of suspended cells is one of the many fundamental manipulations used in a wide range of biotechnological applications such as cell injection and enucleation in nuclear transfer (NT) cloning. Noticeably scarce among the existing rotation techniques is the three-dimensional (3D) rotation of cells on a single chip. Here we present an alternating current (ac) induced electric field-based biochip platform, which has an open-top sub-mm square chamber enclosed by four sidewall electrodes and two bottom electrodes, to achieve rotation about the two axes, thus 3D cell rotation. By applying an ac potential to the four sidewall electrodes, an in-plane (yaw) rotating electric field is generated and in-plane rotation is achieved. Similarly, by applying an ac potential to two opposite sidewall electrodes and the two bottom electrodes, an out-of-plane (pitch) rotating electric field is generated and rolling rotation is achieved. As a prompt proof-of-concept, bottom electrodes were constructed with transparent indium tin oxide (ITO) using the standard lift-off process and the sidewall electrodes were constructed using a low-cost micro-milling process and then assembled to form the chip. Through experiments, we demonstrate rotation of bovine oocytes of similar to 120 mu m diameter about two axes, with the capability of controlling the rotation direction and the rate for each axis through control of the ac potential amplitude, frequency, and phase shift, and cell medium conductivity. The maximum observed rotation rate reached nearly 140 degrees s(-1), while a consistent rotation rate reached up to 40 degrees s(-1). Rotation rate spectra for zona pellucida-intact and zona pellucida-free oocytes were further compared and found to have no effective difference. This simple, transparent, cheap-to-manufacture, and open-top platform allows additional functional modules to be integrated to become a more powerful cell manipulation system.

Computer-aided measurements of cell electrorotation by image analysis techniques

3D cell electrorotation and imaging for measuring multiple cellular biophysical properties.

Pre-resonance stimulated Raman scattering spectroscopy and imaging of membrane potential using near-infrared rhodopsins

Accurate and Automatic Extraction of Cell Self-Rotation Speed in an ODEP Field Using an Area Change Algorithm

Electronic Preresonance Stimulated Raman Scattering Imaging of Red-Shifted Proteorhodopsins: Toward Quantitation of the Membrane Potential.

Computer-Vision-Based Dielectrophoresis Mobility Tracking for Characterization of Single-Cell Biophysical Properties.

Single-cell 3D electro-rotation.

A Cell Electro-Rotation Micro-Device Using Polarized Cells As Electrodes

Bidirectional and Stepwise Rotation of Cells and Particles Using Induced Charge Electroosmosis Vortexes

Automatic Cell Rotation Based on Real-Time Detection and Tracking

On‐chip technology for single‐cell arraying, electrorotation‐based analysis and selective release

Automated measurement of cell mechanical properties using an integrated dielectrophoretic microfluidic device

The effects of nanoparticles uptaken by cells on electrorotation

Electrokinetic System to Determine Differences of Electrorotation and Traveling-Wave Electrophoresis Between Autotrophic and Heterotrophic Algal Cells

Combined Dielectric-Optical Characterization of Single Cells Using Dielectrophoresis-Imaging Flow Cytometry

Detection of the Apoptosis of Jurkat Cell Using an Electrorotation Chip

3D Electro-Rotation of Single Cells

AC electric field induced dipole-based on-chip 3D cell rotation.

Multiple-Cylindrical Electrode System For Rotational Electric Field Generation In Particle Rotation Applications

On-chip Integrated Optical Stretching and Electrorotation Enabling Single-Cell Biophysical Analysis

Differential RhoA dynamics in migratory and stationary cells measured by FRET and automated image analysis