Abstract:Multiple vehicles control at an intersection is one of the most challenging scenarios in the vehicle control field due to the high number of constraints. However, regarding the control strategies of an isolated intersection, few studies have considered the longitudinal-lateral dynamics comprehensively. In the approaches that treat the turning curve as a straight line, a longitudinal dynamic model is adopted, while the lateral execution ability is ignored. The ideal decisions that ignore vehicle dynamics are not accurately executed by actual vehicles, as doing so would be futile. In addition, due to the strong coupling and nonlinearity of the longitudinal-lateral dynamics model, the optimization problem is difficult to solve. Therefore, in this paper, a reasonable model, the simplified vehicle dynamics model coupled with longitudinal-lateral dynamics is used to describe longitudinal, lateral, and yaw motions comprehensively. Optimization of the longitudinal and lateral control of each vehicle is realized simultaneously. The multi-objective optimization problem is decomposed and solved by each vehicle utilizing model predictive control (MPC) in a distributed manner. A novel safety constraint interpretive method (SCIM) is proposed to reduce the number of constraints and facilitate the solution by converting the safety constraint. The asymptotic stability of a local closed-loop system is guaranteed by a terminal constraint, and the global feasibility is proven. Finally, a demanding intersection scenario, with comparison between the Proportional-Integral-Derivative (PID) method and Adaptive Cruise Control (ACC) method, is carried out in a Processor-in-the-Loop (PiL) test. The results demonstrate that intersection safety is guaranteed with smoother control inputs obtained by the designed distributed method. The control inputs are more suitable for vehicle execution, especially in turning maneuvers.

Research on Inverse Dynamics of Vehicle Minimum Time Maneuver Problem

Research on Vehicle Handling Inverse Dynamics Based on Optimal Control

The Study on the Handling and Stability Test of Vehicles Based on ADMS and WTK

Analysis of Lane-change Vehicle Maneuverability Based on Solution of Inverse Problems

Research on Four‐wheel Independent Steering Intelligent Control Strategy Based on Minimum Load

Optimal Control-Based Online Motion Planning For Cooperative Lane Changes Of Connected And Automated Vehicles

Research on Lane Change Motion Planning Steering Input Based on Optimal Control Theory

Time-Optimal Trajectory Planning For Tractor-Trailer Vehicles Via Simultaneous Dynamic Optimization

Minimum Lap Time Control for 4WIS&4WID Autonomous Vehicle with a Nonlinear Programming Method

Modeling and Simulation of Nonlinear Vehicle Handling Inverse Dynamics

Integrated longitudinal and lateral control for autonomous vehicles with active load transfer strategy at the handling limits

A Vehicle Handling Inverse Dynamics Method for Emergency Avoidance Path Tracking Based on Adaptive Inverse Control

Handling Performance Control for Hybrid 8-Wheel-drive Vehicle and Simulation Verification

Game-Theoretic Driver-Automation Cooperative Steering Control on Low-Adhesion Roads With Driver Neuromuscular Delay

An Optimized Control Strategy Based on Hierarchical Design, 4WS-4WD, NMPC, and Nonlinear Dynamics Models

Shared Control for Intelligent Vehicle Based on Handling Inverse Dynamics and Driving Intention

Research on dynamic constraint mechanism and motion control of intelligent vehicles based on preview distance optimization under complex road conditions

Multi-objective optimization study of vehicle suspension based on minimum time handling and stability

Autonomous lane-change controller via mixed logical dynamical

A novel pre-control method of vehicle dynamics stability based on critical stable velocity during transient steering maneuvering

Distributed Intersection Conflict Resolution for Multiple Vehicles Considering Longitudinal-Lateral Dynamics