Abstract:Multi-channel analysis of surface/Love wave (MASW/MALW) has been widely used to construct the shallow shear (S)-wave velocity profile. The key step in surface-wave analysis is to generate accurate dispersion energy and pick the dispersive curves for inversion along the peaks of dispersion energy at different frequencies. In near-surface surface-wave acquisition, bad traces are very common and inevitable due to the imperfections in the recording instruments or others. The existence of bad traces will cause some artifacts in the dispersion energy image. To avoid the interference of bad traces on the surface-wave analysis, the bad traces should be alternatively muted (zeroed) or removed (deleted) from the raw surface-wave data before dispersion measurement. Most geophysicists and civil engineers, however, are not aware of the differences and implications between muting and removing of bad traces in surface-wave analysis. A synthetic test and a real-world example demonstrate the potential pitfalls of applying muting and removing on bad traces when using different dispersion-imaging methods. We implement muting and removing on bad traces respectively before dispersion measurement, and compare the influence of the two operations on three dispersion-imaging methods, high-resolution linear Radon transform (HRLRT), f-k transformation, and phase shift method. Results indicate that when using the HRLRT to generate the dispersive energy, muting bad traces will cause an even more complicated and discontinuous dispersive energy. When f-k transformation is utilized to conduct dispersive analysis, bad traces should be muted instead of removed to generate an accurate dispersion image to avoid the uneven sampling problem in the Fourier transform. As for the phase shift method, the difference between the two operations is slight, but we suggest that removal should be chosen because the integral for the phase-shift operator of the zeroed traces would bring in the sloped aliasing. This study provides a pre-process guidance for the real-world surface-wave data processing when the recorded shot gather contains inevitable bad traces.

Elimination of wind wave effects on sub-bottom profiler record

A Preliminary Study on the Method for Correcting Windwave-induced Distortion Effect in Images of GeoChirp Ⅱ Subbottom Profiler

Key Technology of Seismic Processing for Reflection of Sandstone Shale Interbed at XH Sag in the East China Sea

A Study of the Near Surface High-Frequency Compensation Technology in 3-D Seismic Exploration

Sequential Filtering Applied to Multi-Beam Echo-Sounding

Study on near surface absorption and seismic wave attenuation rules in Qijiabei region

A Depth-Adaptive Waveform Decomposition Method For Airborne Lidar Bathymetry

Correction for Depth Biases to Shallow Water Multibeam Bathymetric Data

The filtering and compressing of outer beams to multibeam bathymetric data

Investigation and Use of Surface-wave Characteristics for Near-surface Applications

The Methods of High Quality Post-Processing for Shallow Multibeam Data

Experimental investigation on wave-induced response of seabed

A Post-Processing Method for the Removal of Refraction Artifacts in Multibeam Bathymetry Data

Extraction of Morphometric Bedform Characteristics from Profiling Sonar Datasets Recorded in Shallow Coastal Waters of China

Filtering of Airborne LiDAR Bathymetry Based on Bidirectional Cloth Simulation

Multibeam seafloor topography distortion correction based on SVP inversion

Automatic Identification and Suppression of Random Noise and Methods for Profile Splicing in the Sub-Bottom Profile of Deep Water

Multibeam Bathymetric Data Quality Control Based on Robust Least Square Collocation of Improved Multi - Quadric Function

Multiple Suppression by Hyperbolic Vector Median Filtering of Deep-Water Ocean-Bottom PS Waves

A Pitfall of Muting and Removing Bad Traces in Surface-Wave Analysis

A Method of Correction for Marine Seismic Acquisition