Abstract:HCCI (Homogeneous Charge Compression Ignition) combustion has the potential to significantly reduce NOx and PM emission of diesel engines due to its nature of even mixture and low temperature combustion. This combustion mode is only applicable in part load and low speed area so far. This range limitation results in frequently combustion mode switching from HCCI to CI and vice versa in real applications. HCCI realized by late injection with heavy EGR rate is investigated, which is also named PCCI (Premixed Charged Compression Ignition) sometimes. By changing control parameters (including injection timing, injection pressure and EGR rate) individually, the influences of these parameters on HCCI combustion and emissions are identified. Based on the evaluation of the influences, one pre-defined step-by-step air-fuel coordination strategy is presented. Additionally one hysteresis combustion mode determination method is proposed to avoid target mode fluctuation due to variation of engine speed or engine load in a small range. Torque deficiency occurs in acceleration transients as a result of fuel limitation to reduce soot emission, especially during HCCI to Cl transitions. One ISG (Integrated Starter Generator) motor is applied to perform dynamic torque compensations in transient operations. Engine friction torque is estimated by means of cylinder pressure information from in-cylinder pressure sensors. On the basis of torque estimation, the difference between desired engine brake torque and actual engine brake torque is obtained. The torque output of ISG motor accounts for this torque gap and the torque pre distributed to ISG motor. The strategy is verified by engine tests. Experimental results indicate that, with the finely defined air-fuel coordination, less unstable combustion occurs and the target modes are established more quickly during transitions both in steady states and in transients. The torque deficiency during acceleration operations could be well compensated by the ISG motor. (C) 2013 Elsevier Ltd. All rights reserved.

Study of SI-HCCI-SI Mode Switching in a GDI Engine

Mode switch of SI-HCCI combustion on a GDI engine

Realization and Control of SI/HCCI Mode Switch on a GDI Engine

Experimental Research on Mode Switch in a Multi-Cylinder HCCI Engine

Effects of Key Factors on the Engine Combustion Mode Switching Between HCCI and SI

Control of a spark ignition homogeneous charge compression ignition mode transition on a gasoline direct injection engine

Experimental Investigation of a Heavy-Duty CI Engine Retrofitted to Natural Gas SI Operation

Research on steady and transient performance of an HCCI engine with gasoline direct injection

Combustion Mode Switching Control in A Hcci Diesel Engine

Study of Multimode Combustion System with Gasoline Direct Injection

Modeling and Optimization of the SI/HCCI Mode Transient Switching

Operating Conditions Using Spark Assisted HCCI Combustion During Combustion Mode Transfer to SI in a Multi-Cylinder VCR-HCCI Engine

Control of HCCI Combustion in a Two-Cylinder GDI Engine with Negative Valve Overlap

An Investigation into the Operating Mode Transitions of a Homogeneous Charge Compression Ignition Engine Using EGR Trapping

Operating Characteristics of a Homogeneous Charge Compression Ignition Engine with Cam Profile Switching - Simulation Study

Experimental Investigation on Multi-mode Combustion of GDI Engine

Control of Homogeneous Charge Compression Ignition Combustion in a Two-Cylinder Gasoline Direct Injection Engine with Negative Valve Overlap

HCCI combustion control by injection strategy with negative valve overlap in a GDI engine

An Experimental Study on SICI Combustion in Gasoline Direct Injection Engine with Variable Valve Timing

Study of the Effect of Spark Ignition on Gasoline HCCI Combustion

Experimental and Computational Studies on Gasoline HCCI Combustion Control Using Injection Strategies